• 한국수소및신에너지학회논문집
• /
• 제25권5호
• /
• pp.459-467
• /
• 2014

The catalytic steam reforming of toluene, a major component of biomass tar, was studied using several catalysts at various temperatures $400-800^{\circ}C$, kind of metal, and metal loading content. Ru and K promoted Ni-base catalyst were prepared, and used for steam reforming of toluene with steam/toluene molar ratio of 25. Concentration of toluene in reactant flow is $30g/Nm^3$ that is usual content of tar from biomass gasifier. The result from experiments showed that $H_2$ content in product gas and toluene conversion increased with temperature. Where in high temperature range, CO and $CO_2$ content in product gas were affected mainly by Boudouard reaction. Ni/Ru-K(3wt%)/$Al_2O_3$ catalyst showed best performance on steam reforming of toluene than used catalysts in this study at whole temperature. Catalysts have been characterized by XRD, TG. XRD analysis displayed that Ni particle size on Ni/Ru-K (3wt%)/$Al_2O_3$ catalyst was 29.4nm. Activation energy of Ni/Ru-K (3wt%)/$Al_2O_3$ catalyst was calculated 36.8kJ/mol by Arrhenius plot.

• 한국수소및신에너지학회논문집
• /
• 제17권4호
• /
• pp.448-453
• /
• 2006

Porous Co-P catalysts electroplated on Cu in chloride based solution with an addition of $NaH_2PO_2$ and glycine were developed for hydrogen generation from alkaline $NaBH_4$ solution. The microstructures of the Co-P catalysts and their hydrogen generation properties were analyzed as a function of cathodic current density and plating time during the electrodeposition. Amorphous Co-P electrodeposits with porous structure was formed on Cu at cathodic current density of $0.05\;A/cm^2$, and showed very high hydrogen generation rate in alkaline $NaBH_4$ solution due to an increase in the surface area of the catalyst as well as the catalytic activity. The Co-P catalyst, which was obtained at cathodic current density of $0.05\;A/cm^2$ for 5 min, exhibited the best hydrogen generation rate of 2290 ml/min.g-catalyst in 1 wt. % NaOH+10 wt. % $NaBH_4$ solution at $30^{\circ}C$.

• 한국수소및신에너지학회논문집
• /
• 제25권3호
• /
• pp.247-254
• /
• 2014

The synthesis of Fischer-Tropsch oil is the catalytic hydrogenation of CO to give a range of products, which can be used for the production of high-quality diesel fuel, gasoline and linear chemicals. Our cobalt based catalyst was prepared Co/alumina, silica and titania by the incipient wet impregnation of the nitrates of cobalt and promoter with supports. Cobalt catalysts was calcined at $350^{\circ}C$ before being loaded into the FT reactors. After the reduction of catalyst has been carried out under $450^{\circ}C$ for 24hrs, FT reaction of the catalyst has been carried out at GHSV of 4,000/hr under $200^{\circ}C$ and 20atm. From these test results, we have obtained the results as following ; in case of 12wt% Co-supported $Al_2O_3$, $SiO_2$ and $TiO_2$ catalysts, maximum activities of the catalysts were appeared at the promoters of Mn, Mo and Ce respectively. The activity of 12wt% $Co/Al_2O_3$ added a Mn promoter was about 3 times as high as that of 12wt% $Co/Al_2O_3$ catalyst without promoters. When it has been the experiment at the range of reaction temperature of $200{\sim}220^{\circ}C$ and GHSV of 1,546~5,000/hr, the results have shown generally increasing the activities with the increase of reaction temperature and GHSV.

• 한국수소및신에너지학회논문집
• /
• 제28권4호
• /
• pp.323-330
• /
• 2017

Ash remaining after coal combustion was used as a catalyst support for tar steam reforming with various proportions of $Al_2O_3$ added for higher reforming efficiency. At a constant Ni content of 12 wt%, a coal ash and $Al_2O_3$ were mixed at a ratio of 5:5, 7:3, 9:1. As a result, the catalytic activity for toluene steam reforming was improved by adding $Al_2O_3$ at $500-600^{\circ}C$. The catalysts with ratio 7:3 and 5:5 reached toluene conversion of 100% above $700^{\circ}C$. When comparing the catalysts in which the coal ash and $Al_2O_3$ mixed at a ratio of 5:5 and 7:3 with the Ni/Al catalyst, it was concluded that this coal ash catalyst has efficient catalytic performance.

• 한국수소및신에너지학회논문집
• /
• 제29권2호
• /
• pp.170-180
• /
• 2018

After $MoS_2$ catalyst was prepared at 1, 30, and 70 atm, the hydrothermal pressure effect over preparation of $MoS_2$ was investigated in terms of catalyst characterization and direct methanation. Multifaceted characterization techniques such as XRD, BET, SEM, TPR, EDS, and XPS were used to analyze and investigate the effect of high pressure over the preparation of surface and bulk $MoS_2$ catalyst. Result from XRD, SEM, and BET demonstrated that $MoS_2$ was more dispersed as preparation pressure was increased, which resulted finer $MoS_2$ crystal size and higher surface area. EDS result confirmed that bulk composition was $MoS_2$ and XPS result showed that S/Mo mole ratio of surface was about 1.3. TPR showed that $MoS_2$ prepared at 30 atm possessed higher active surface sites than $MoS_2$ prepared at 1 atm and these sites could contribute to higher CO yield during methanation. Direct methanation was used to evaluate the CO conversion of the both catalysts prepared at 1 atm and 30 atm and reaction condition was at feed mole ratio of $H_2/CO=1$, GHSV=4800, 30 atm, temperature($^{\circ}C$) of 300, 350, 400, and 450. $MoS_2$ prepared at 30 atm showed more stable and higher CO conversion than $MoS_2$ prepared at 1 atm. Faster deactivation was occurred over $MoS_2$ prepared at 1 atm, which indicated that preparation pressure of $MoS_2$ catalyst was the dominant factor to improve the yield of direct methanation.

• 한국수소및신에너지학회논문집
• /
• 제25권2호
• /
• pp.209-217
• /
• 2014

To enhance the performance of SEWGS system by holding the WGS catalyst in a SEWGS reactor, a spring type bed insert was developed. In this study, effects of operating variables such as steam/CO ratio, gas velocity, syngas concentration on CO conversion were investigated in a fluidized bed reactor using the spring type bed insert to hold the WGS catalyst as tablet shape. CO conversion increased initially as the steam/CO ratio increased. But further increment of the steam/CO ratio caused decreasing of CO conversion because of increment of gas velocity and decrement of syngas concentration. Moreover, CO conversion decreased as the gas velocity increased and the syngas concentration decreased at the same steam/CO ratio. Continuous operation up to 48 hours (2 days) was carried out to check reactivity decay of WGS catalyst supported by spring type bed insert. The average CO conversion was 99.04% and we could conclude that the WGS reactivity at those conditions was maintained up to 48 hours.

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.390-397
• /
• 2010

0.5wt% Ru/$\alpha-Al_2O_3$ catalysts are prepared by deposition-precipitation method for the preferential CO oxidation In order to investigate the effect of pH on the Ru dispersion and particle size, the pH of precursor solution is adjusted to between 5.5 and 9.5. 0.5wt% Ru/$\alpha-Al_2O_3$ catalyst prepared at the pH of 6.5 has high Ru dispersion of 17.9% and small particle size of 7.7nm. In addition, 0.5wt% Ru/$\alpha-Al_2O_3$ catalyst prepared at the pH 6.5 is easily reduced at low temperatures below $150^{\circ}C$ due to high dispersion of $RuO_2$ particle and shows high CO conversion over 90% in the wide temperature range between $100^{\circ}C$ and $160^{\circ}C$. Moreover, the deposition-precipitation is a feasible method to improve the Ru dispersion as compared to the impregnation method. The 0.5wt% Ru/$\alpha-Al_2O_3$ catalyst prepared by deposition-precipitation exhibits higher CO conversion than 0.5wt% Ru/$\alpha-Al_2O_3$ catalysts prepared by impregnation due to higher metal dispersion and better reducibility at low temperature.

• Korean Chemical Engineering Research
• /
• 제53권6호
• /
• pp.802-807
• /
• 2015

본 논문에서는 글루코스산화제, polyethyleneimine(PEI) 및 탄소나노튜브 간 물리적 흡착으로 제조된 촉매(GOx/PEI/CNT)에 새로운 가교제인 terephthalaldehyde(TPA)를 첨가하여 민감도 및 안정성이 개선된 글루코스 센서 촉매를 합성하여, 감지능 및 안정성 개선효과를 확인하였다. 새로운 가교제를 포함한 바이오 촉매는, 글루코스산화제 및 polyethyeleneimine의 관능기와 TPA의 관능기간 알돌축합반응에 의해 생성되었고, 이를 통해 생성된 새로운 전자전달구조는 글루코스의 산화반응을 촉진시켰다. 이러한 촉매활성은 전기화학적 평가를 통해 정량적으로 평가하였으며 그 결과 $41.1{\mu}Acm^{-2}mM^{-1}$의 글루코스 민감도를 얻을 수 있었다. 또한 가교제와 글루코스산화제 및 polyethyeleneimine 간의 화학반응의 형성에 의해 글루코스 산화제의 외부 손실을 최소화 하여, 센서 안정성 향상에도 크게 기여하였다. 안정성 평가를 한 결과, 3주간의 주기적인 촉매 활성 측정후에 94.6% 활성이 유지됨을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.541-543
• /
• 2006

The feasibility of biodiesel production from soapstock by acid catalyst was tested. The water content of soapstock was more than 40%. Before the esterification of soapstock, the pre-treatment of soapstock was conducted adding potassium hydroxide and sulfuric acid. The pre-treated soapstock contained 99.6wt% of free fatty acid. When the free fatty acid was esterified with methanol, the fatty acid methyl ester content became 91.7wt% under the solid acid catalyst, Amberlyst-15. When this biodiesel was distilled the methyl ester content was 98.1wt% which satisfied the biodiesel Standard. Amberlyst-15 could be recovered easily because it was the soliid catalyst. When sulfuric acid was used as the acid catalyst, the fatty acid methyl ester content was 91.0wt%. From the results, it was possible to produce biodiesel efficiently from soapstock after pre-treatment. Because soapstock is very cheap, it will become good feedstock for biodiesel product ion.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.229-232
• /
• 2005

인화점이 높은 합성 액체연료인 RJ-4의 제조공정 개선에 관한 연구를 수행하였다. 상용원료인 MCPD(Methylcyclopentadiene dimer)를 이용한 RJ-4 연료제조에서 헤테로폴리 텅스토인산 세슘염 촉매와 2단 열 조절반응기를 사용하여 1차, 2차 수소화 및 이성화반응이 1 단계 연속공정으로 가능함을 알 수 있었다. 또한 $AlCl_3$ 대신에 헤테로폴리산 세슘염을 이성화촉매로 사용시 exe-THDMCPD(Tetrahydrodimethylcyclopentadiene)을 얻는 속도가 더 빠르며, 생성물과의 분리가 용이하고, 폐산 발생이 없으므로 환경친화적인 공정임을 확인하였다.