• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.4
• /
• pp.77-85
• /
• 2008

PDF is widely accepted as a standard document format and now it supports 3D contents as well. Within the engineering application areas, this new 3D feature may be used to support sharing of 3D documents and thus collaboration between engineering departments, suppliers and partners. In this paper, we describe a system that automatically generates formatted engineering documents including 3D data converted from 3D applications such as commercial 3D CAD viewer. The system consists of two major modules. One is U3D conversion module and the other is PDF conversion module. U3D conversion module extracts geometry, view data, assembly and disassembly information from 3D viewer and converts to U3D format, currently in IDTF text file format. PDF conversion module generates a PDF file and inserts U3D data, various annotation information, and scripts for custom generated operations such as assembly and disassembly in the PDF document.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.3
• /
• pp.576-599
• /
• 2013

Protocol reverse engineering is useful for many security applications, including intelligent fuzzing, intrusion detection and fingerprint generation. Since manual reverse engineering is a time-consuming and tedious process, a number of automatic techniques have been proposed. However, the accuracy of these techniques is limited due to the complexity of binary instructions, and the derived formats have missed constraints that are critical for security applications. In this paper, we propose a new approach for protocol format extraction. Our approach reasons about only the evaluation behavior of a program on the input message from concolic execution, and enables field identification and constraint inference with high accuracy. Moreover, it performs binary analysis with low complexity by reducing modern instruction sets to BIL, a small, well-specified and architecture-independent language. We have implemented our approach into a system called Icefex and evaluated it over real-world implementations of DNS, eDonkey, FTP, HTTP and McAfee ePO protocols. Experimental results show that our approach is more accurate and effective at extracting protocol formats than other approaches.

• The Journal of Society for e-Business Studies
• /
• v.8 no.4
• /
• pp.53-68
• /
• 2003

Currently, it is possible to buy almost anything from books(Amazon.com) to airplane tickets(Travelocity.com) using the world wide web. The purpose of this research is to develop a "clean interface" between design and fabrication facilities for the production of custom machined parts through Internet. The current mechanism for production of prototype parts that can be fabricated using standard machine tools like milling machines, requires a process of part description preparation, bidding, contract award, and finally fabrication and delivery of the part. This is a substantially more complex process than buying a book or airplane ticket. In this paper, we try to define the ambiguous part description using XML based data exchange format and to enable e-commerce in this field. The research accomplishments are summarized: 1. Creation of a new format for data exchange of machined prototype parts, 2. Development of a prototype system to illustrate how the XML data can be effectively used to conduct e-Commerce for custom machined parts, 3. Testing of the methodology with a number of parts.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.11
• /
• pp.4443-4462
• /
• 2020

This paper proposes a new framework of reversible data hiding scheme for absolute moment truncation coding (AMBTC) compressed images. AMBTC-based RDH can be applied to optical remote sensing (ORS) image transmission, which achieves target region preservation and image compression simultaneously. Existing methods can be concluded as two types. In type I schemes, stego codes mimic the original AMBTC format where no file bloat occurs, yet the carried secret data is limited. Type II schemes utilize predication errors to recode quantity levels of AMBTC codes which achieves significant increase in embedding capacity. However, such recoding causes bloat inside stego format, which is not appropriate in mentioned ORS transmission. The proposed method is a novel type I RDH method which prevents bloat inside AMBTC stego codes with significant improvement in embedding capacity. The AMBTC compressed trios are grouped into two categories according to a given threshold. In smooth trio, the modified low quantity level is constructed by concatenating Huffman codes and secret bits. The reversible contrast mapping (RCM) is performed to complex trios for data embedment. Experiments show that the proposed scheme provides highest payload compared with existing type I methods. Meanwhile, no expansion inside stego codes is caused.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.25-36
• /
• 1995

The application of the reliability analysis is investigated as a probabilistic approach to the assessment of ship's structural strength and to the establishment of design format for longitudinal strength. Reliability analyses are carried out for 34 ships of tankers and bulk carriers built in HHI for some failure modes such as tensile yielding, compressive buckling and ultimate strength of hull girder. The safety assessment of each ship, the calculation of sensitivity factors and the derivation of target reliability index are performed. As results. the difference of reliability indices among ships is great for all modes. To provide more uniform levels of safety the establishment of new strength criteria using partial safety factors is performed. The partial safety factors for the design format are obtained according to the AFOSM method and the reliability-conditioned(RC) method. Finally, a design format using partial safety factors has been proposed. We could find out that new strength criteria can produce consistent reliability indices which are close to the target value.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.94-102
• /
• 2015

Optical camera communication (OCC) is an extension of Visible Light Communication. Different from traditional visible light communication, optical camera communications is an almost no additional cost technology by taking the advantage of build-in camera in devices. It was became a candidate for communication protocol for IoT. Camera module can be easy attached to IoT device, because it is small and flexible. Furthermore almost smartphone equip one or two camera for both back and font side with high quality and resolution. It can be utilized for receiving the data from LED or positioning. Actually, OCC combines illumination and communication. It can supply communication for special areas or environment where do not allow Radio frequency such as hospital, airplane etc. There are many concept and experiment be proposed. In this paper we proposed utilizing Android smart-phone camera for receiver and introduce new approach in modulation scheme for LED at transmitter. It also show how Manchester coding can be used encode bits while at the same time being successfully decoded by Android smart-phone camera. We introduce new data frame format for easy decoded and can be achieve high bit rate. This format can be easy to adapt to performance limit of Android operator or embedded system.

• Journal of KIBIM
• /
• v.12 no.4
• /
• pp.70-79
• /
• 2022

As BIM(Building Information Modeling) technology advances in architecture around the world, projects and industries using BIM are increasing. Unlike previous developments that were limited to buildings, BIM is now spreading to other fields such as civil engineering and electricity. In architecture, BIM is used in the entire process from design to maintenance of a building, and IFC(Industry Foundation Classes), a neutral format with interoperability, is used as an open BIM format. Since firefighting requires intuitive 3D models for evacuation and fire simulations, BIM models are desirable. However, due to the BIM model, which was developed centered on building objects, there are no objects and specific properties for fire evacuation in the IFC scheme. Therefore, in this study, when adding a new object in the firefighting area to the IFC schema, the IFC interoperability is not broken and the building WBS(Work Breakdown Structure) is analyzed with a hierarchical system similar to the IFC format to define the scope for a new object and the firefighting part within of the building WBS to derive a firefighting HBS(Hierarchy Breakdown Structure) with the extension of the object-oriented IFC file. And according to HBS, we propose an IFC schema extension method. It is a methodology that allows BIM users to instantly adapt the IFC schema to their needs. Accordingly, the methodology derived from this study is expected to be expanded in various areas to minimize information loss from IFC. In the future, we will apply the IFC extension methodology to the actual development process using HBS to verify that it is actually applicable within the IFC schema.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.5
• /
• pp.805-811
• /
• 2018

Recently, Format-Preserving-Encryption (FEA) was suggested by the National Security Research institute (NSR) as an encryption method while maintaining the format without a distortion to the intended information to be encrypted. In this paper, we propose a scheme to solve conventional cyber security problems by using FEA scheme. First, we present the method to encrypt signatures and extensions with FEA in order to effectively defend against Ransomeware attacks. This technique can mitigate the exposure to the Ransomeware by encrypting the minimum information. Second, in order to reduce the secret information for Steganography, we introduce a new way to minimize the secret information with FEA. Finally, we compare the operation speed by encryption with FEA and Lightweight Encryption Algorithm (LEA), furthermore when we optimize FEA we want to compare with the performance improvement accompanying with it.

• Journal of KIISE:Software and Applications
• /
• v.30 no.3_4
• /
• pp.219-230
• /
• 2003

Motion capture technology is widely used to make a realistic motion in these days. So, motion capture data is required to exchange between many animators in a work group. But different motion capture devices have different motion rapture data formats. Thus it is difficult that a animator reuse and exchange motion capture data in a storage. In this paper, we proposes a standard format for integrating a different motion capture data format. In addition, we proposes a framework of a system that manage motion capture data using our standard format. Our standard format is called MCML(Motion Capture Markup Language). It is a markup language for motion capture data and based on XML(extensable Markup Language). Our system to manage motion capture data consists of a several component - MCML Converter, MCML , MCML Editor, Motion Viewer.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.3 s.33
• /
• pp.79-85
• /
• 2005

Early, national basic topographical map has been represented, stored, supplied in form of DXF(Data eXchange Format) and present digital map is equipped as over form. Since many parts of digital map has been equipped newly to use early digital map form for geographic information system. Especially, many structural editing and geographical search are demanded to exclude geometric inconsistency and logical inconsistency included in the existing digital map. As above, DXF is unsuitable data format to use in geographic information system. For the sake of efficient format, Digital Map Ver. 2.0 that is new map format was developed. In this study, we developed the Mobile Viewer program development which can let us see immediately the digital maps produced in the form of Digital Map Ver. 2.0.