• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.14
• /
• pp.349-370
• /
• 2000

The environmental problems such as global climate change, global waming, ozone depletion, environmental pollution have been caused by the rapid economic growth, increasing in use of fossil fuels for industrialization and scientific technology development. Especially human activities are significantly altering the atomosphere's composition and its radiative properties. To Stabilize greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system, the international community adopted the UN Framework Convention on Climate Change in 1992 and Kyoto protocol in 1997. Also to protect ozone layer the international community adopted the Vienna Convention for the Protection of the Ozone Layer in 1985, and the Montreal Protocol on Substances that Deplete the Ozone Layer in 1987. To achieve global environmental objectives, some multilateral environmental agreements includes trade regulation. For example, Montreal Protocol includes the provisions to regulate the world trade of the sudstances which might destroy ozone layer. However Kyoto Protocol has no provisions to regulate trade and is not in force yet. Although there is no trade regulation article in Kyoto Protocol, the international world trade will be influenced by limitation and reduction of CO2 and strengthening the CO2 emission standard for import good. For example Korean car industy agreed with EU to reduce CO2 emission from new passenger car and Korean Semiconductor industry agreed with WSC(World Semiconductor Council) to reduce PFCs in 1999.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.4
• /
• pp.87-96
• /
• 1996

The proportional pressure control valve(PCV) is an essential component in the open loop controlled rear wheel steering gear of the four wheel steering(4WS) system on the passenger car. The valve should have versatile functions and higher performance. But, it is hard to find the proportional pressure control valve suitable for the 4WS system. In this paper, the determination of the valve parameters was studied by the stability discrimination and the characteristic analysis for the purpose of the development of a new PCV for the 4WS. The mathematical model of the valve was derived from the valve-cylinder system and the programme for numerical computation was developed. The transfer function of the system was obtained from the mathematical model. The characteristics of the valve were inspected through the experiment and compared to those obtained by numerical method. And then the stability discrimination of the system was done by root locus and the analysis of characteristics was done by the developed programme. From the experiment and the analysis of characteristics was done by the developed programme. From the experiment and the inspection, the appropriation of mathematical model and the usefulness of the programme were confirmed. And the parameters which might affect the performance of the valve can be determined by considering the stability discrimination, the characteristics analysis and required functions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.17-22
• /
• 2014

Recently, the quick heating performance is an important issue in the car because engine power becomes so high. So car makers have been adapted the additional heating devices as like PTC(Positive Temperature Coefficient) heater. And the quick cooling performance is also important issue because its result is used in the IQS(Initial Quality Study). In this paper, control of the HVAC(Heating, Ventilation and Air Conditioning) intake door has been studied for the quick heating and cooling performance. Heating performance is improved $4.0^{\circ}C$ at $-20^{\circ}C$ ambient temperature after 20 minutes. And cooling performance is improved $1.5^{\circ}C$ at $35^{\circ}C$ ambient temperature after 10 minutes. In addition, intake door control system brings on the cost reduction because the flab door can be eliminated. This intake door control system has been adapted to the new developing cars.

• Transactions of Materials Processing
• /
• v.17 no.2
• /
• pp.130-134
• /
• 2008

Resource and energy saving is a very important practice for the future as well as for today. Weight saving of structural parts, which are formed by extrusion, plays a key role in manufacturing field. The cross-sections of extruded parts with industrial aluminum are constant in the axial direction by conventional extrusion method. Especially, these aluminum parts used and manufactured in the car industry need other processes to vary the cross-section in the axial direction. However, applications of these parts are often limited by high cost. If the cross-section of the parts is variable by only extrusion with newly developed method, the application of extruded aluminum parts will actually increase. Therefore, a new CNC extruder that can control the section area of a car part was invented for the first time in the nation. Using the extrusion machine, the experiment was performed to validate its workability during the variable section extrusion process. Also, numerical analysis was carried out to investigate the flow mode with different speeds of main ram and various pocket shapes of a die-set in the variable section extrusion process.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.1
• /
• pp.27-32
• /
• 2015

In order to protect occupant during car crash accident, Regulation and NCAP(New Car assessment Program) have been developed among various countries like U.S.A., Europe, Korea and Australia. Especially NCAP scores affect to sales of vehicles. So vehicle makers are trying to get good score in NCAP. Low leg injuries play an important role in Australia and Euro NCAP and these injuries are related with footrest design. Optimization of footrest design in early stage of vehicle development is necessary to obtain better and robust results of low legs during crash tests. In this paper, DFSS method and finite element model were used to optimize the low leg performance in small RHD vehicles. Compared with the lower leg injury of base model, the lower leg injury of proposed model was slightly improved and robustness was enhanced also.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.6
• /
• pp.843-851
• /
• 2010

This study aims to systematically develop a usability evaluation model using the Structural Equation Model (SEM) from experiment of usability on using vehicle. Vehicle developers have been adding many functions for enhance the user satisfaction. But it will be made the trade-off problem of usability and design elements of vehicle interior from attempt to make best usability satisfaction in a restricted space. To solve the trade-off problem, we set a new solution criterion from usability evaluation model. The usability experiment is based on major activity pool from derived user's acts pattern in vehicle for make more accurate usability evaluation model. And this model was built with twenty-nine measurement variables for the evaluation of usability of vehicle user. As a result, the proposed SEM model showed statistical significance as well as a high level of R Square (0.7144). This model shows the relationships of detailed usability and design elements. According to the result, this study introduces the criterion to secure the best satisfaction of usability and design elements.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.3
• /
• pp.59-65
• /
• 2023

As advanced driving assistance system (ADAS) and autonomous driving performance continue to improve, existing crash accidents and crash types are changing. Accordingly, the collision angle and the seating posture of the occupant are changed. It is necessary to study how the occupant injury mechanism changes according to these different crash types. In this regard, a representative crash test mode was derived when the automatic emergency braking system (AEB), one of the autonomous driving performance, was applied to the representative car-to-car crash scenario in Korea. The derived crash test mode was used to analyse the mechanisms of collision injuries according to both impact angle and the occupant seating posture (reclined seat-back angle). The results obtained through this study can be utilized as reference data for the development of new crash evaluation methods and improvements in crash restraint systems for enhancing crash safety.

• IE interfaces
• /
• v.15 no.4
• /
• pp.356-363
• /
• 2002

Virtual Manufacturing is a technology to facilitate effective product development and agile production by computer models representing the physical and logical schema and the behavior of real manufacturing systems including manufacturing resources, environments and products. For the successful application of this technology, a virtual factory as a well-designed and integrated environment is essential. In this research, we constructed a sophisticated virtual factory model of an automotive company's paint shop, and performed precise simulations of unit cells, lines and whole plant operations for collision check and off-line programming. It is expected that this virtual paint shop is useful for achieving time and cost savings in many manufacturing preparation and planning activities of new car development processes.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.561-564
• /
• 2007

FCEV uses electric energy which generated from the reaction between Hydrogen and Oxygen in fuel cell stack as driving force. As fossil fuels are exhausted, fuel cell is regarded as a potent substitute for next generation energy source, and thus, most of car-makers make every efforts to develop fuel cell electric vehicle (FCEV). In addition, fuel cell is also beneficial in aspect of environment, because only clean water is produced during chemical reaction process instead of harmful exhausted gas. Generally, Hydrogen is supplied from high-pressured fuel tank, and air blower (or compressor) supply Oxygen by pressurizing ambient air. Air blower which is driven by high speed motor consumes about $7{\sim}8$ % of energy generated from fuel cell stack. Therefore, the efficiency of an air blower is directly linked with the performance of FCEV. This study will present the development process of an air blower and its consisting parts respectively.

• Asian Journal of Innovation and Policy
• /
• v.6 no.3
• /
• pp.332-353
• /
• 2017

This paper highlights how Thailand upgrades its positions in global value chains in high-tech, mid-tech and low-tech industries represented by electronics, automotive and frozen seafood, respectively. In the electronics industry, there are not many capable firms in the upstream segment like semiconductors. Nevertheless, transnational corporations in segment like hard disk drive began to invest in process R&D and collaborate more with local suppliers, universities and public research institutes in human resource and technological development. In the automotive industry, several Japanese car manufacturers such as Toyota, Honda, Nissan, and Isuzu set up R&D/Technical centres in Thailand since 2000s. This prompted Japanese and local part suppliers to also invest more in engineering, design and development activities. Some local universities offer as well engineering programmes specifically targeting the automotive industry. In the frozen seafood industry, several Thai firms have developed new ready-to-eat products, own brands and international distribution networks. They started to become transnational corporations investing in both developing and developed countries.