• 한국재료학회지
• /
• 제9권3호
• /
• pp.327-332
• /
• 1999

중성자에 조사 $(fluence: 2.3\times10^{19}ncm^{-2}, 553 K, E\geq1.0 MeV)$된 Mn-Mo-Ni 저 합금강 모재의 열처리 회복 거동을 조사하기 위하여 등시소둔과 등온소둔을 수행하여 회복 활성화에너지, 회복 반응차수 그리고 회복 반응률상수를 결정하였다. 열처리 후 회복은 비커스 미세 고온경도기로 측정하였고 실험결과를 이용, 열처리 회복단계, 회복결함들의 거동 및 회복 kinetics을 분석하였다. 실험결과 2단계의 회복구간(stage I : 703-753K, stage II : 813K-873K)이 나타났으며 각 단계의 회복활성화 에너지는 2.50 eV(1단계) 및 2.93 eV(2단계)이었다. 조사재와 비조사재의 등시소둔 곡선의 비교를 통하여 813K에서 RAH(radiation anneal hardening) 피크를 확인할 수 있었다. 743K 및 833K에서 수행한 등온소둔 결과, 회복의 60%가 모두 120분 이내에 일어나는 것으로 관찰되었다. 회복 반응차수는 두 회복구간에서 모두 2로 나타났으며 회복 반응율상수는 $3.4\times10^{-4}min^{-1}$(1단계)과 $7.1\times10^{-4}min^{-1}$(2단계) 이었다. 이상의 결과와 기 발표된 자료들을 함께 분석한 결과, 본 재료의 회복은 오랜 중성자조사로 형성된 점결함 집합체들이 열처리에 의한 분해와 Fe 기지에 격자간 원자로 존재하던 self-interstitial들과 vacancy들의 재결합에 의해 일어나는 것으로 해석된다.

• Journal of Radiation Protection and Research
• /
• 제7권1호
• /
• pp.34-48
• /
• 1982

본 연구의 일차적 목적은 방사선 방호를 위하여 임의지점(任意地點)의 주변 방사선량의 수준을 특성(特性)짓는 방법의 하나로 ICRU가 정의(定義)한 흡수선량지수를 실측(實測)하는데 있는 바 이를 위한 실험은 에비실험과 본 실험의 두 단계로 나누어 수행하였다. 예비단계의 실험에서는 30cm 지름의 polyethylene구(球)를 사용한 반면 본 실험에서는 인체조직등가물질(人體組織等價物質)의 구(球)를 제작하였으며 두 실험 모두 $^{137}Cs$ 및 $^{60}Co$ 감마선장(線場)과 TRIGA Mark-II 원자로의 열중성자(熱中性子) column의 중성자공장(中性子工場)에서 행하여졌다. 감마선 흡수선량측정에는 TCD-700 $(^{7}LiF)$ chip을, 중성자선량측정에는 Au 방사화박(放射化薄)과 함께 TLD chip도 사용하였는데 이 경우에는 감마선의 기여를 판별해 내기 위하여 TLD-600 $(^{6}LiF)$과 TLD-700을 동시에 사용하였다. 감마선 조사(照射)의 경우 구(球) phantom내(內) 흡수선량의 이론적 해석은 Burlin의 공동이론(空洞理論)에서 유도된 Erlich의 방법을 썼으며, 중성자 선량해석에는 fluence-KERMA 변환방법을 사용하였다. 이들 선량에 관하여서는 특히 자세히 설명하였다. 해석에 실험결과는 모두 통계적으로 처리 분석하였으며 특히 심부선량분포(深部線量分布)는 규격화(規格化)한 값을 사용하여 도표(圖表)로 나타내는 한편, 결론에서는 방사선방호용 지수량(指數量) 실측(實測)의 가능성과 난점(難點)을 설명하고 해결하여야 할 문제점들을 언급(言及)하였다.

• Journal of Radiation Protection and Research
• /
• 제26권3호
• /
• pp.225-229
• /
• 2001

In Korea, an advanced reactor system of 330MWt power called SMART (System integrated Modular Advanced ReacTor) is being developed by KAERI to supply energy for seawater desalination as well as electricity generation. A shielding design of the SMART core with 49 CEDM is established by a two-dimensional discrete ordinates radiation transport analyses. The DORT two-dimensional discrete ordinates transport code is used to evaluate the SMART shielding designs. Three axial regions represent the SMART reactor assembly, each of which is modeled in the R-Z geometry. The BUGLE-96 library is used in the analyses, which consists of 47 neutron and 20 gamma energy groups. The results indicate that the maximum neutron fluence at the bottom of reactor vessel is $5.89 {\times} 10^{17}\;n/cm^2$ and that on the radial surface of reactor vessel is $4.49 {\times} 10^[16}\;n/cm^2$. These results meet the requirement, $1.0 {\times} 10^{20}\;n/cm^2$, in 10 CFR 50.61 and the integrity of SMART reactor vessel during the lifetime of the reactor is confirmed.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.253-259
• /
• 2015

The fast neutron reactor BOR-60 is one of the key experimental facilities worldwide to perform large-scale tests of fuel, absorbing, and structural materials for advanced reactors. The BOR-60 reactor was put into operation in December 1969, and by the end of 2014 it had been operating on power for ~265,000 hours. BOR-60 still demonstrates potential capabilities to extend the lifetime of sodium-cooled fast reactors. The BOR-60 lifetime should have expired at the end of 2014. Over the past few years, a great scope of work has been performed to justify the possibility of extending its lifetime. The work included inspection of the equipment conditions, calculations and experimental research on operating parameters and the conditions of nonremovable components, investigation of the structural material samples after their long-term operation under irradiation, etc. Based on the results of the work performed, the residual lifetime was evaluated and the reactor operator made a decision to extend the lifetime period of the BOR-60 reactor. After considering both a set of documents about the reactor conditions and the positive decision of independent experts, the Regulatory Authority of the Russian Federation extended the BOR-60 operating license up to 2020.

• Journal of Radiation Protection and Research
• /
• 제30권2호
• /
• pp.55-60
• /
• 2005

SMART 연구로의 노외계측기 설계를 위하여 고온 전출력 조건과 중성자 계수율이 최소가 되는 조건에 대해서 중성자속 분포 평가를 수행하였다. 고온 전출력 조건에서 IST 영역의 에너지 구간별 중성자속 분포 계산은 DORT와 MCNP코드를 이용하였으며, 계산 결과 IST 내의 첫 번째 물 영역에서 최대의 열중성자속을 보였고 두 코드 결과는 대략 10% 이내에서 일치하는 것으로 나타났다. 그리고 중성자 계수율이 최소가 되는 조건에서 노외계측기 설치 영역에서의 중성자속을 계산한 결과, 선원의 세기가 $1.0{\times}10^8(n/sec)$이라고 가정한 경우 최대 열중성자속의 크기는 $6.99{\times}10^{-2}(n/cm^2-sec)$로 전체 중성자속의 80% 이상을 차지하는 것으로 나타났는데 이는 IST 철 구조물을 통과한 속중성자가 감속능이 큰 물 영역에서 에너지를 잃고 열중성자로 변하였기 때문이다. 그러므로 노외계측기 설계시 계측기를 둘러싸는 계측기 안내관 충전물질, 설치위치 그리고 각 계측기 Segment들의 길이 등을 최적화하여 중성자 계수율을 증가시키는 방안을 모색할 필요가 있겠으며, 이러한 중성자속 평가 결과는 노외계측기가 IST 영역에 설치될 경우 노외계측기 선속 요건으로 이용될 수 있다.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.344-351
• /
• 2020

AgInCd alloy is widely used as neutron absorber in nuclear reactors. However, the AgInCd control rods may fail during service due to the irradiation swelling. In the present study, a calculational method is proposed to calculate the composition change of the AgInCd absorber. Calculated results show that neutron fluence has significant impact on the chemical compositions. Ag and In contents gradually decrease while Cd and Sn conversely increases from the center to the rim of AgInCd absorber due to the depression of neutron flux. The composition change at the surface is higher almost two times than that at the center. Based on the calculated compositions, six simulated AgInCdSn alloys were prepared and examined. With the increase of Cd and Sn, the simulated AgInCdSn alloys transform from a single fcc phase into the mixed fcc and hcp phases, and finally into the single hcp phase. The atomic volume of the hcp phase is obviously larger than the fcc phase. The fcc-hcp transformation results in considerable volume swelling of the AgInCd absorber. Moreover, the lattice parameters of the fcc and hcp phases gradually increase with Cd and Sn contents, which also can induce small volume swelling.

• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.188-195
• /
• 2002

To investigate the degradation of mechanical properties induced mainly by neutron irradiation, the tensile tests were conducted from room temperature to 300\\`c using the irradiated and the unirradiated Zr-2.5Nb pressure tube materials. The irradiated longitudinal and transverse specimens were collected from the coolant inlet, middle, and outlet parts of M-11 tube which had been operated in Wolsung CANDU Unit-1 and exposed to different operating temperatures and irradiation fluences. The different tensile behavior was characterized not by the fluences of irradiation but by the tensile loading direction. The transverse specimen showed the higher strength and lower elongation than those of the longitudinal one. It was believed that these phenomena resulted from the microstructure anisotropy caused by the extrusion process. The increased strength hardening and decreased elongation embrittlement of the irradiated material were compard to those of the unirradiated one. While the tensile strength of the inlet was higher than that of the outlet, the elongation of the inlet was lower than that of outlet. Considering the operation condition, it was proposed that the operating temperature could be a more effective parameter than the irradiation fluence for long-time life. Through the TEM observation, it was found that while the a-type dislocation density was increased, the c-type dislocation was not changed in the irradiated. The fact that the higher dislocation density was sequentially distributed over the inlet, the middle, and the outlet parts was consistent with the distribution of the tensile strength.

• Nuclear Engineering and Technology
• /
• 제33권5호
• /
• pp.498-513
• /
• 2001

Performed here is a comparative assessment study for the generation of the pressure- temperature (P/T) limit curve of the reactor vessel. Using the cooling or heating rate and vessel material properties, the stress distribution is obtained to calculate stress intensity factors, which are compared with the material fracture toughness to determine the relations between operating pressure and temperature during cool-down and heat-up. P/T limit curves are generated with respect to crack direction, clad thickness, toughness curve, cooling or heating rate and neutron fluence, and their results are compared.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.727-728
• /
• 2008

The objective of this study is to evaluate the integrity for a reactor pressure vessel under the pressurized thermal shock by applying the probability fracture mechanics. A semi-elliptical axial crack is assumed to be in the beltline region of the reactor pressure vessel. The selected random variables are the neutron fluence on the vessel inside surface, the content of copper, nickel, and phosphorus in the reactor pressure vessel material, and initial RTNDT. The probabilistic integrity analysis was performed using the Monte Carlo simulation.

• Structural Engineering and Mechanics
• /
• 제14권2호
• /
• pp.191-208
• /
• 2002

A comparative assessment study for a generation of the pressure-temperature (P-T) limit curve of a reactor vessel is performed in accordance with ASME code. Using cooling or heating rate and vessel material properties, stress distribution is obtained to calculate stress intensity factors, which are compared with the material fracture toughness to determine the relations between operating pressure and temperature during reactor cool-down and heat-up. P-T limit curves are analyzed with respect to defect orientation, clad thickness, toughness curve, cooling or heating rate and neutron fluence. The resulting P-T curves are compared each other.