• 대한지하수환경학회지
• /
• 제6권4호
• /
• pp.206-212
• /
• 1999

산성광상배수의 처리를 위한 중화제로서 제강 슬래그의 이용 가능성을 검토하였으며 석회석과의 성능을 비교하였다. 24시간 반응시킨 고정 실험에서는 슬래그가 석회석보다 높은 pH를 나타냈고 Fe. Al 및 기타 중금속에 우수한 제거효율을 보였다. 10일간 진행된 연속단계실험결과 역시 슬레그가 석회석보다 높은 pH를 유지하였고 Fe와 Al의 제거성능의 저하는 나타나지 않았으며 Ni, Co. Cu. Zn 모두 석회석보다 슬래그에서 휠씬 높은 제거효율을 보였다. 황산$({H_2}{SO_4})$으로 pH를 AMD와 동일하게 맞추고 중금속만을 인위적으로 첨가한 증류수(인공산 용액)와의 반응에서는 AMD와의 반응에서보다 중금속의 제거효율이 떨어졌는데, 이는 AMD내에 존재하는 Fe와 Al 산화물이 침전할 때 공침이나 흡착에 의해 중금속이 제거되는데 비해 인공적인 AMD에서는 이러한 효과가 없기 때문인 것으로 판단된다. 슬래그의 크기별(5mm이하. 5~20 mm. 20 mm이상)실험에서는 슬래그의 크기가 작을수록 더 높은 pH 상승과 더 효과적인 금속들의 제거 성능을 보여 비표면적이 중요한 요인임을 제시하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.59-61
• /
• 2005

In Korea, hundreds of abandoned and closed coal and metallic mines are present in the steep mountain valleys due to the depression of the mining industry since the late 1980s. From these mines, enormous amounts of coal waste were dumped on the slopes, which causes sedimentation and acid mine drainage (AMD) to be discharged directly into streams causing detrimental effects on soil and water environments. A limestone slurry by-product (lime cake) is produced from the Solvay process in manufacturing soda ash. It has very fine particles, low hydraulic conductivities ($10^{-8}{\sim}10^{-9}cm/sec$), high pH, high EC due to the presence of CaO, MgO and $CaCl_2$ as major components, and traces of heavy metals. Due to these properties, it has potential to be used as a neutralizer for acid-producing materials. A field plot experiment was used to test the application of lime cake for reclaiming coal wastes. Each plot was 20 x 5 m (L x W) in size on a 56% slope. Treatments included a control (waste only), calcite ($CaCO_3$), and lime cake. The lime requirement (LR) for the coal waste to pH 7.0 was determined and treatments consisted of adding 100%, 50%, and 25% of the LR. The lime cake and calcite were also applied in either a layer between the coal waste and topsoil or mixed into the topsoil and coal waste. Each plot was hydroseeded with grasses and planted with trees. In each plot, surface runoff and subsurface water were collected. The lime cake treatments increased the pH of coal waste from 3.5 to 6, and neutralized the pH of the runoff and leachate of the coal waste from 4.3 to 6.7.

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.103-109
• /
• 2009

Chemicals for cosmetics, including skin, the skin absorbs some of the research in the field of science or pharmacy recently, about the environment and the health of the heightened interest in skin absorption. Many other human attributes and absorption evaluation studies are underway in various areas. This study were used rats and carried out to find out the effects of commercial permanent wave products to skin which are composed with thioglycolic acid and bases. Results were as follows. Permanent wave penetrated to 3 hours later with steady state in skins and was not significant changeable after 20hr later. In case of neutralizer with thioglycolic acid lag time and permeability coefficient in healthy skin were 3.32hr and $0.101{\mu}g/cm^2/hr$, in old skin were 3.08hr and $0.117{\mu}g/cm^2/hr$, and in wounded skin were 3.02hr and $0.166{\mu}g/cm^2/hr$. In conclusion, lag time and permeability coefficient in old skin and wounded skin were faster than healthy skin. In vivo, We were studied to general time and method of permanent wave. We found out that fine wrinkle and rash of skin were changeable in the case of treating with permanent wave drugs than normal skin.

• 한국응용과학기술학회지
• /
• 제19권1호
• /
• pp.19-24
• /
• 2002

It is a great role that the character of man or woman could be distinguished by hair on the aspect of ornament. Hair will be support of beautifulness of human being in various permanent wave by many kinds of its drugs. Hair is based upon the skin which enroll the body of high living animals and have multiple membrane structure. This study used rat and the effects of commercial permanent wave products to skin which are composed with thioglycolic acid and bases. Results are as follows. Permanent wave penetrated to 4 hours later with steady state in skins and was not significant changeable after 20hr later. In case of neutralizer with thioglycolic acid lag time and permeability coefficient in healthy skin is 3.38hr and $0.094^{\mu}g/cm^{2}$ ${\cdot}$ hr, it old skin is 3.48hr and 0.129$^{\mu}g/cm^{2}$ ${\cdot}$ hr, and it wounded skin is 4.72hr and $0.158^{\mu}g/cm^{2}$ ${\cdot}$ hr. In conclusion, lag time and permeability coefficient in old skin and wounded skin are faster than healthy skin. In vivo which was studied by general time and method of permanent wave. We notified that fine rinkle and rash of skin were changeable in the case of treating with permanent wave drugs than normal skin. We can see even rash and eruption by the naked eye.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권2호
• /
• pp.52-60
• /
• 2011

Although facilities for the passive treatment of AMD (Acid Mine Drainage) are currently operating in Korea, their removal efficiency for heavy metals is relatively low in average (only 80%). Passive treatment system is composed of oxidation tank, SAPS (Successive Alkalinity Producing System), and wetland. In the treatment system adopted in korea, SAPS (Successive Alkalinity Producing System) plays a major role to remove about 65% of heavy metals through a precipitation. However, the efficiency of SAPS is limited due to the use of mushroom compost (MC) as a organic material and of limestone as a neutralizer. Therefore, this research was performed to search for alternative organic materials through the field test. We tested two types of mixed organic materials: 1) cow manure and spent oak (herein, CO) and 2) cow manure and sawdust (herein, CS). For comparison mushroom compost (herein, MC) was also tested. The result showed that the average Fe removal efficiency was 91.38% with CO, 85.19% with CS, and 91.58% with MC. Thus, CO can be effectively used as an alternative of MC in the SAPS system for heavy metals removal.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.368-368
• /
• 2008

Ion implantation has been widely developed during the past decades to become a standard industrial tool. To comply with the growing needs in ion implantation, innovative technology for the control of ion beam parameters is required. Beam current, beam profile, ion fractions are of great interest when uniformity of the implant is an issue. Especially, it is important to measure the spatial distribution of beam power and also the energy distribution of accelerated ions. This energy distribution is influenced by the proportion of mass for ion in the plasma generator(ion source) and by charge exchange and dissociation within the accelerator structure and also by possible collective effects in the neutralizer which may affect the energy and divergence of ions. Hydrogen atom has been the object of a good study to investigate the energy distribution. Hydrogen ion sources typically produce multi-momentum beams consisting of atomic ion ($H^+$) and molecular ion ($H_2^+$ and $H_3^+$). In the beam injector, the molecular ions pass through a charge-exchanges gas cell and break up into atomic with one-half (from $H_2^+$) or one-third (from $H_3^+$) according to their accelerated energy. Burrell et al. have observed the Doppler shifted lines from incident $H^+$, $H_2^+$, and $H_3^+$ using a Doppler shift spectroscopy. Several authors have measured the proportion of mass for hydrogen ion and deuterium using an ion source equipped with a magnetic dipole filter. We developed an ion implanter with 50-KeV and 20-mA ion source and 100-keV accelerator tube, aiming at commercial uses. In order to measure the proportion of mass for ions, we designed a filter system which can be used to measure the ion fraction in any type of ion source. The hydrogen and helium ion species compositions are used a filter system with the two magnets configurations.

• 한국의류산업학회지
• /
• 제4권3호
• /
• pp.266-272
• /
• 2002

This research is compared and analyzed variations of the heavy metal contents in human hairs according to treating permanent wave manipulation before and after and permanent wave agents. This is the survey of women's hairs in 19 years old. On the basis of this we would like to analyze a extend of exposing of heavy metal scientifically. Also, we would to show a basic data for the permitted limits of heavy metal to keep the healthy hair The conclusion is as follows.; Mean contents of heavy metal in hairs is 2.11 ppm (Pb), 0.25 ppm (Cd), 2.62 ppm (Ni), 256 ppm (Zn), 8.45 ppm (Cu). In reducing agents (processing lotions) of perm, 1.50 ppm (Pb), 0.03 ppm (Cd), 0.05 ppm (Ni), 15.45 ppm (Zn), 0.86 ppm (Cu) in a perm (S), 2.30 ppm (Pb), 0.05 ppm (Cd), 0.05 ppm (Ni), 13.05 ppm (Zn), 0.65 ppm (Cu) in a perm (T). In oxidizing agents (neutralizer) of perm, 1.40 ppm (Pb), 0.03 ppm (Cd), 0.09 ppm (Ni), 9.05 ppm (Zn), 0.65 ppm (Cu) in a perm (S), 1.50 ppm (Pb), 0.02 ppm (Cd), 0.16 ppm (Ni), 8.00 ppm (Zn), 0.85 ppm (Cu) in a perm (T). Mean contents of lead(Pb) didn't show significant differences according to treating cysteine perm agents, showed it according to 3 treating thioglycolic acid perm agents (p<0.05). Mean contents of cadmium(Cd) showed significant differences (p<0.001) according to 2 treating both perm agents. Mean contents of nickel (Ni) showed neither. Mean contents of zinc (Zn) showed significant differences according to 2 treating cysteine perm agents (p<0.001) and 1 treating thioglycolic acid perm agents (p<0.01). Mean contents of copper (Cu) didn't show significant differences according to treating cysteine perm agents, showed it according to 1 treating thioglycolic acid perm agents (p<0.001).

• 한국미생물·생명공학회지
• /
• 제5권3호
• /
• pp.127-131
• /
• 1977

억새풀을 알칼리로 전처리한 다음 직접섬유소를 자화할 수 있는 세균을 배양하여 SCP생산의 최적조반을 검토하고 및 가지 결과를 얻었기에 보고하는 바이다. 1) 알칼리성 처열제로써 NaOH가 가장 우수하였으며 87.4% lignin을 제거하였고 이것을 기질로하여 균체를 배양하였을 때 수율이 높았다. 2) NaOH의 농도별로 그 효과를 검토하였을 때 4%의 농도가 가장 적당하였다. 3) 알칼리 처리후 중화시 중화제로서는 H$_3$PO$_4$가 균기수율에 가장 좋았다. 4) 경시적 배양시 균기수율은 60시간에서 가장 좋았고 배양액 1ml당 9.23mg의 건조체를 얻었으며 75.2%의 소화율을 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.132-132
• /
• 1998

Ion bombardment in the keV range is known to induce drastic chemical modifications in organic and inoranic molecular comppounds. A degrading effects in orgainc materials such as the release of ppolymer compponents and the chemistry of the iradiation pprocess have been observed. The work to be described was carried out in order to understand the irradiation effect better. The sampple(ppolyimide : Kappton ) Were irradiated by Ar+, Ne+, H+ ions and electrons (3 keV) to fluence ranging from ~1$\times$1015 to ~1$\times$1017 ions/$cm^2$ at room tempperature. The impplant was usually rastered over an area of a few $cm^2$ . These ion impplantation were carried out in an electron sppectrometer ESCA 5700 (ppHI Ltd) at a residual gas ppressure of ~5$\times$10-10 Torr. X-ray pphotoelectron sppectroscoppy(XppS) measurements were made using a monochromatized Al Kａ(1486.6 eV) excitation source. The pphotoemitted electrons were detected by hemisppherical analyser with a ppass energy of 23.5 eV. Core-level binding energies were referenced to the Fermi level. To avoid the charging effect it was used the neutralizer. We studied the irradiation effects on ppolyimide with Ar+, Ne+, He+ ions and electrons by XppS which 추 pprovide detailed information concerning the bonding-induced changes.

• 폴리머
• /
• 제35권2호
• /
• pp.171-175
• /
• 2011

Isophorone diisocyanate(IPDI), polytetramethylene glycol 1000(PTMG 1000), 그리고 N-methyl diethanol amine(MDEA)을 사용하여 양이온성 수분산 폴리우레탄을 제조하였다. 중화제와 사슬연장제의 구조변화에 따른 입도, 점도, $T_g$, 인장강도 그리고 수 팽윤도와 같은 물성의 변화를 알아보기 위해 여러 가지 중화제와 사슬연장제를 도입하였다. Acetic acid(AA)를 사용하여 중화한 수분산 폴리우레탄은 전형적인 elastomer의 거동을 보이는 반면, hydrochloric acid (HCI)로 중화한 경우에는 crystalline polymer의 거동을 보였다. 사슬연장제 중에서는 isophorone diamine(IPDA)이 가장 우수한 기계적 물성을 나타내었다. HCl로 중화하였을 경우 acetic acid로 중화하였을 때보다 압도가 감소함을 확인하였는데 이는 중화제의 반대이온(counter ion) 크기 차이 때문으로 여겨지며 hydrazine으로 사슬연장하였을 때 가장 작은 입도값을 나타내었다.