• Computers and Concrete
• /
• 제29권3호
• /
• pp.127-144
• /
• 2022

To investigate the flexural stiffness of the steel-composite beam, the contributions of the concrete slab and steel beam to the stiffness were considered separately. The method for flexural stiffness of the composite beam, considering the stiffness of the concrete slab and steel beam, was proposed in this paper. In addition, finite element models of the composite beams were established and validated. Parametric analyses were carried out to study the effects of different parameters on the neutral axis distance reduction factors of the concrete slab and steel beam. Afterward, the neutral axis distance reduction factors were fitted, and the stiffness combination coefficients of the two parts were solved. Based on the stiffness combination coefficients, the flexural stiffness of the composite beam can be obtained. The proposed method was validated by the tested and analyzed results. The method has a simple form and high accuracy in predicting the flexural stiffness of the steel-concrete composite beam, even though the degree of shear connection is less than 0.5.

• 대한치과보철학회지
• /
• 제28권1호
• /
• pp.123-135
• /
• 1990

It would be of importance to determine the neutral Tone by a resultant axis of relation on relation to the mandible in understanding the biomechanics of the mandibular movement. In this study, the neutral zone at the habitual opening and closing mandibular movements is the shape of the paths described by a minimum moving point occured as an average center of the determined instantaneous centers of rotation. Twenty, aged $23{\sim}25$, male dental students without Temporomandibular disorders and with normal occlusion clinically were selected for the study. The habitual opening and closing mandibular movements were recorded by the Gnathorecouder and analyzed by the computer program of a planer rigid body model and the determined method of a minimum moving point. The results obtained from this study were as follows. 1. The minimum moving points were placed in the body of the mandible except two subjects. 2. The mean of maximum displacements of a minimum moving point was $0.62{\pm}0.08cm$ on X-axis and $0.73{\pm}0.16cm$ on y-axis. 3. The mean of maximum displacements of a minimum moving point was $3.39{\pm}0.62cm$ 4. The position and shape of the neutral zone were determined by the position, displacements, and moving distances of a minimum moving point.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1471-1483
• /
• 2017

The low-frequency characteristics of four-switch three-phase (FSTP) inverter are investigated in this paper. Firstly, a general space vector pulse width modulation (SVPWM) directly involved the neutral point voltage of DC-link is proposed, where no sector identifications and trigonometric function calculations are needed. Subsequently, to suppress the DC offset in the neutral point voltage, the relationship between the neutral point voltage and the ${\beta}-axis$ component of the load current is derived, and then a new neutral point voltage control scheme is proposed where no low pass filter is adopted. Finally, the relationship between the load power factor and the maximum linear modulation index of the FSTP inverter is revealed. Since the operational region for the FSTP inverter in low frequency is reduced by the enlarged amplitude of the neutral point voltage, a linear modulation range enlargement scheme is proposed. A permanent magnet synchronous motor with preset rotary speed serves as the low-frequency load of the FSTP inverter. Experimental results verify that the new neutral point voltage control scheme is effective in the deviation suppression of the neutral point voltage, and the proposed scheme is able to provide a larger linear operational region in low frequency.

• Computers and Concrete
• /
• 제20권2호
• /
• pp.129-143
• /
• 2017

Seismic design of reinforced concrete (RC) structures requires a certain minimum level of flexural ductility. For example, Eurocode EN1998-1 directly specifies a minimum flexural ductility for RC beams, while Chinese code GB50011 limits the equivalent rectangular stress block depth ratio at peak resisting moment to achieve a certain nominal minimum flexural ductility indirectly. Although confinement is effective in improving the ductility of RC beams, most design codes do not provide any guidelines due to the lack of a suitable theory. In this study, the confinement for desirable flexural ductility performance of both normal- and high-strength concrete beams is evaluated based on a rigorous full-range moment-curvature analysis. An effective strategy is proposed for flexural ductility design of RC beams taking into account confinement. The key parameters considered include the maximum difference of tension and compression reinforcement ratios, and maximum neutral axis depth ratio at peak resisting moment. Empirical formulae and tables are then developed to provide guidelines accordingly.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.462-467
• /
• 1998

A rational method for prediction of long-term deflections of reinforced concrete beams under sustained loads was proposed. Strain and stress distributions of uncracked and fully cracked sections after creep and shrinkage were determined from the requirements of strain compatibility and force equilibrium of a section, and then long-term deflections were calculated from the section analysis results. In fully cracked section analysis, noncoincidence of the neutral axis of strain and the neutral axis of stress after creep and shrinkage was taken into account. The accuracy of the proposed method was verified by comparison with several experimental measurements of beam deflections. The proposed approximate procedure gave the better predictions than the existing approximate methods. At the same time, the proposed method also retained simplicity of the calculation, since maximum long-term deflection could be obtained without tedious integration of the curvatures.

• Steel and Composite Structures
• /
• 제16권6호
• /
• pp.639-655
• /
• 2014

The mechanical characteristic of reinforced concrete filled steel tubular (RCFT) structures are differed from that of concrete filled tubular steel (CFT) structures because the reinforcement in RCFT largely affects the performance of core concrete such as ductility, strength and toughness, and hence the performance of RCFT should be evaluated differently from CFT. To examine the effect axial reinforcement on bending performance, an investigation on RCFT beams with varying levels of axial reinforcement is performed by the means of numerical parametric study. According to the numerical simulation results with 13 different ratios of axial reinforcement, it is concluded that the reinforcement has obvious effect on bending capacity, and the neutral axis of RCFT is different from CFT, and an evaluation equation in which the effect of axial reinforcement is considered for ultimate bending strength of RCFT is proposed.

• 소성∙가공
• /
• 제3권4호
• /
• pp.401-414
• /
• 1994

Springback for the three point bending is anlayzed and experimented. Neutral axis is assumed to remain at the midthickness for large ratio of radius of curvature to thickness. Pure bending theory is used to be extended to the analysis of the springback for three point bending. The specimen is thought to be divided into numerous small elements. The theory for pure bending is then adopted for analysis of each element to obtain springback in terms of the relationship between initial and final deflections. the boundary conditions between neighborhood elements are the deflection and slope which should be the same. Deflection is calculated by summing up the deflections of each element. Experiments have been performed for different conditions which are punch radius, span length, and initial deflections. Comparisons between the analytical solution and experimental results show the same trends.

• International Journal of Korean Welding Society
• /
• 제3권2호
• /
• pp.7-14
• /
• 2003

During the manufacture of a ship, longitudinal deformation is produced by fillet welding on the Built­Up beam used to improve the longitudinal strength of a ship. This deformation needs a correcting process separate from a manufacture process and decreases productivity and quality. This deformation is caused by welding moment, which is the value multiplied the shrinking force due to welding by the distance from the neutral axis on a cross section of Built­Up beam. This deformation can be offset by generating a moment which is the same magnitude with and is located in an opposite direction to the welding moment on web plate by induction heating. Accordingly, this study clarifies the creation mechanism of the longitudinal deformation on Built­Up beam with FEM analysis and presents the preventative method of this deformation by induction heating basing the mechanism and verifies its validity through analysis and experiments. The induction heating used here is performed by deciding its location and quantity with experiments and simple equations and by applying them to a real structure.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권3호
• /
• pp.193-199
• /
• 2002

콘크리트 구조물에 발생하는 구조적인 균열은 재하하중에 의하여 콘크리트가 저항할 수 있는 인장강도보다 더 큰 인장강도가 가해졌을 때 콘크리트의 인장영역에서 발생하며, 이는 구조물의 노후화 또는 재하하중에 대한 저항능력이 감소되었음을 의미한다. 그러므로 콘크리트에 발생한 구조적 균열은 구조물에 치명적인 손상을 유발시킬 수 있으며, 구조물의 안전성 확보와 효과적인 유지관리를 위해서는 이를 검출하는 기법에 대한 연구가 반드시 필요한 실정이다. 본 연구에서는 토목계측 분야에서 가장 널리 활용되고 있는 변형률 센서를 철근콘크리트 보에 부착하여 보의 인장부와 압축부의 변형률을 측정하는 실내실험을 수행하였으며, 하중 재하에 따른 변형률의 변화, 측정부위의 탄성계수 변화, 그리고 중립축의 변화 등을 비교 분석하였다. 분석 결과로부터, 측정된 변형률을 이용하여 중립축의 변화 추이를 추정하므로써 가장 효과적으로 균열을 검출할 수 있는 알고리즘을 제시하였다.

• 대한토목학회논문집
• /
• 제37권2호
• /
• pp.277-287
• /
• 2017

이 연구는 한계상태설계법을 기반으로 하는 도로교설계기준에 의해 철근콘크리트 휨부재 설계 시 적용하는 균형철근비와 최대 철근량에 대한 규정을 검토한 것이다. 현행 도로교설계기준(한계상태설계법)에서는 휨부재 철근량 산정의 기준이 되는 균형철근비에 대한 명시적 규정이 없고, 휨모멘트 재분배 효과를 반영한 최대 중립축 깊이 및 콘크리트 단면적의 0.04배로서 최대 철근량을 산정한다. 그런데, 최대 중립축 깊이 규정에 의하면 최대 철근량이 적게 산정되어 단면을 크게 하여야 하며, 콘크리트 단면적의 0.04배라는 한계값이 적용될 경우에는 인장 철근의 변형률이 항복 변형률의 2배 이하로 되어 충분한 연성거동을 보장할 수 없는 문제점이 있다. 이 연구에서는 연성거동을 확보할 수 있는 휨부재 설계를 위한 사용 철근량 산정의 기준이 되는 균형철근비를 극한한계상태 검증 규정 및 재료 특성과 콘크리트 기준압축강도에 따른 극한한계변형률을 도입하여 설계 실무에 적용할 수 있도록 간편한 식으로 유도하였다. 그리고, 설계된 휨부재가 충분한 연성이 확보되도록 인장철근의 최소허용변형률을 항복변형률의 2배로 가정하고 철근의 기준항복강도 및 콘크리트 기준압축강도에 상관없이 만족할 수 있도록 최대 중립축 깊이 비 보정계수를 도입하여 수정하고, 이로부터 최대철근비를 산정할 수 있도록 하였다.