• 한국염색가공학회지
• /
• 제13권2호
• /
• pp.28-28
• /
• 2001

Four kinds of neutral sodium salts with different anions, NaF, NaCl, NaBr, and NaI, were added to the dye bath to accurately understand the effect of anions on the reactive dyeing of silk with C. I. Reactive Black 5. The sodium cation lowered the negative surface potential of the silk and increased the dye-uptake on fille fabric as reported previously. However, because of the discrepancy in the anions′inhibition power from cation′s lowering the surface negative potential the amount of the dye on the silk fiber was different from each other in the order of $F^-\;>\;Cl^-\;>\; Br^-\;>\;I^-$. The activation energy($E_a$) for the dyeing was in the order of $F^-\;>\;Cl^-\;>\; Br^-\;>\;I^-$ but the dye-uptake on the fabric and the activation free energy(Δ$G^*$), the real energy barrier for the reaction, were in the order of $F^-\;>\;Cl^-\;>\; Br^-\;>\;I^-$ because the strength of the interaction of the anions with sodium cations was the same as the order of the latter. In other words $F^-$ exerted the weakest electrostatic force on $Na^+$and competed with the dyestuff anions least of all. The decrease in Δ$S^*$may be due to the looesly bonded activated complex of dyestuff anions, sodium cations and fiber molecules at transition state. It was clarified from the Bronsted equation that sodium salts with different anions also had fille ionic strength effect and the specific salt effect on the reactive dyeing.

• PNF and Movement
• /
• 제18권2호
• /
• pp.265-273
• /
• 2020

Purpose: The purpose of the study was to investigate the effects of HMD (head mounted display)-based virtual reality balance training on static balance in young adults, and whether appropriate balance training can help healthy adults to improve balance ability in daily living. Methods: The study subjects were 14 healthy adults. Subjects received 20 minutes of HMD-based virtual reality balance training 3 times per week for 4 weeks. Static balance was measured before, during, and after training and after one month. Static balance was measured in a total of 8 conditions, and the results were classified as visual (F1), somatosensory (F5-6), vestibular (F2-4), and central nervous system (F7-8). Results: The test results showed no significant difference in pre-training, post-training, and follow-up results under all conditions at Fourier index F1, F5-6, and F7-8 frequencies. For the F2-4 frequency, there was a significant difference before and after training under NC (neutral head position, eyes closed, firm surface) and PC (neutral head position, eyes closed, elastic surface) conditions. The NC condition returned a significant decrease of F2-4 frequency in post-training testing as compared to pre-training, and the PC condition showed a significant decrease of F2-4 frequency between the pre-training and mid-training tests, and between the pre-training and post-training tests. Conclusion: These results indicate that HMD-based balance training can improve balance ability, even in normal adults, and seems especially effective for vestibular function training.

• 대한수의학회지
• /
• 제31권1호
• /
• pp.1-10
• /
• 1991

The present investigation was focussed on histochemical and electron microscopical observations of utero-vaginal(U-V) glands in U-V junctions of domestic hens. In histochemical observations, fine granules by PAS technique for mucopolysaccharides and nile blue stain for acidic lipids were slightly stained on the cytoplasm of U-V glandular epithelium. Larger granules by Sudan black B stain for neutral fat and phospholipids and Sudan III stain for neutral fat were heavily stained on the perinuclear region of the U-V gland epithelial cells. These positive materials were heavily stained on the U-V glandular epithelium of lowfecundity hens and non-laying hens. In scanning electron microscopic findings of the U-V junction surface, the orifices of U-V glands are seen as the crater-like invagination. The neck of the U-V gland and the epithelium of U-V iunction were covered by ciliated epithelial cells. Aggregates of spermatozoa are observed often to be on the necks of the U-V gland. These spermatozoa heads are embedded in the glandular tubules and many spermatozoa tails are free on the epithelium of uterine surface. In transmission electron microscopic findings, the epithelial cells of the U-V glandular orifices were ciliated, columnar cells. The apical regions of these cells contained numerous electrondense, round secretory granules of uniformly size. The epithelial cells of the U-V glandular tubule were columnar or pyramid shape with round or oval nuclei. These epithelial cells have numerous microvilli and also contained electron-dense, round secretary granules of uniformly size and electron-lucent vesicles of various size. Spermatozoa are seen as the cross-sections of various regions of heads and tails in glandular tubules. Also spermatozoa arranged longitudinally parallel within the glandular tubules.

• 한국전문물리치료학회지
• /
• 제13권1호
• /
• pp.24-31
• /
• 2006

The purpose of this study was to identify the effect of the hip internal rotation on gluteal and erector spinae muscle electromyographic (EMG) activity during treadmill walking. Eleven healthy subjects were recruited. All subjects performed treadmill walking while maintaining the hip in neutral position (condition 1) and in internal rotation (condition 2). Surface EMG activity was recorded from four muscles (gluteus maximus (GM), gluteus medius (GMED), tensor fascia latae (TFL), and erector spinae (ES)) and the hip internal rotation angle was measured using a three dimensional motion analysis system. The gait cycle was determined with two foot switches, and stance phase was normalized as 100% stance phase (SP) for each condition using the MatLab 7.0 program. The normalized EMG activities according to the hip rotation (neutral or internal rotation) were compared using a paired t-test. During the entire SP of treadmill walking, the EMG activities of GM in condition 1 were significantly greater than in condition 2 (p<.05). The EMG activities of TFL and ES in condition 2 were significantly greater than in condition 1 (p<.05). The EMG activities of the GMED in condition 1 were significantly greater than in condition 1 (p>.05) except for 80~100% SP. Further studies need randomized control trials regarding the effect of hip internal rotation on the hip and lumbar spine muscle activity. Kinetic variables during gait or going up and down stairs are also needed.

• Corrosion Science and Technology
• /
• 제20권6호
• /
• pp.373-383
• /
• 2021

The effect of Cr addition to high Mn steel on flow-accelerated corrosion (FAC) behavior in a neutral aqueous environment was evaluated. For comparison, two types of conventional ferritic steels (API X70 steel and 9% Ni steel) were used. A range of experiments (electrochemical polarization and impedance tests, weight loss measurement, and metallographic observation of corrosion scale) were conducted. This study showed that high Mn steel with 3% Cr exhibited the highest resistance to FAC presumably due to the formation of a bi-layer scale structure composed of an inner Cr enriched Fe oxide and an outer Mn substituted partially with Fe oxide on the surface. Although the high Mn steels had the lowest corrosion resistance at the initial corrosion stage due to rapid dissolution kinetics of Mn elements on their surface, the kinetics of inner scale (i.e. Cr enriched Fe oxide) formation on Cr-bearing high Mn steel was faster in dynamic flowing condition compared to stagnant condition. On the other hand, the corrosion scales formed on API X70 and 9% Ni steels did not provide sufficient anti-corrosion function during the prolonged exposure to dynamic flowing conditions.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.367-377
• /
• 2001

Plasma is generated by electrical discharge. Most plasma generation has been carried out at low-pressure gas typically less than one millionth of atmospheric pressure. Plasmas are in general generated from impact ionization of neutral gas molecules by accelerated electrons. The energy gain of electrons accelerated in an electrical field is proportional to the mean free path. Electrons gain more energy at low-pressure gas and generate plasma easily by ionization of neutrals, because the mean free path is longer. For this reason conventional plasma generation is carried out at low pressures. However, many practical applications require plasmas at high-pressure. In order to avoid the requirement for vacuum pumps, researchers in Korea start to develop plasmas in high-pressure chambers where the pressure is 1 atmosphere or greater. Material processing, environmental protection/restoration and improved energy production efficiency using plasmas are only possible for inexpensive bulk plasmas. We thus generate plasmas by new methods and plan to set foundations for new plasma technologies for $21^{st}$ / century industries. This technological research will play a central role in material processing, environmental and energy production industries.

• 한국안전학회지
• /
• 제2권1호
• /
• pp.17-29
• /
• 1987

The extraction mechanism of Zinc from aqueous solution with D2EHPA (Di-2-Ethylhexyl Phosphoric Acid) dissolved in Kerosene was studied by the single drop method. The effect of the concentrations of reactant species on the extraction rate, Zinc and hydrogen ion in the continuous phase and D2EHPA in the dispersed, was studied for the drop rise period by the experiment. Then a theoretical analysis on the basis of Handlos-Baron modle was carried out. It becomes clear that the extraction rate was controlled by the neutral complex forming reaction at the drop surface from both analysises. From effect of the concentrations of species on the reaction rate, the extraction rate at the drop surface is considered to be as follows. $${\gamma}_{pn}=9.42{\times}10^{-7}\;\frac{[Zn^{2+}][(HR)_2]^{3/2}}{[H^+]^{3/2}}$$

• Interaction and multiscale mechanics
• /
• 제4권3호
• /
• pp.207-217
• /
• 2011

International efforts have focused recently on the development of tungsten surfaces that can intercept energetic ionized and neutral atoms, and heat fluxes in the divertor region of magnetic fusion confinement devices. The combination of transient heating and local swelling due to implanted helium and hydrogen atoms has been experimentally shown to lead to severe surface and sub-surface damage. We present here a computational model to determine the relationship between the thermo-mechanical loading conditions, and the onset of damage and failure of tungsten surfaces. The model is based on thermo-elasticity, coupled with a grain boundary damage mode that includes contact cohesive elements for grain boundary sliding and fracture. This mechanics model is also coupled with a transient heat conduction model for temperature distributions following rapid thermal pulses. Results of the computational model are compared to experiments on tungsten bombarded with energetic helium and deuterium particle fluxes.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.743-748
• /
• 2013

The temperature dependence of the partition coefficients of a neuropeptide, substance P (SP), in isotropic acidic bicelles was investigated by using a pulsed field gradient nuclear magnetic resonance diffusion technique. The addition of negatively charged dimyristoylphosphatidylserine to the neutral bicelle changed the SP partitioning a little, which implies that the hydrophobic interaction between the hydrophobic residues of SP and the acyl chains of lipid molecules is the major interaction while the electrostatic interaction is minor in SP binding in a lipid membrane. From the temperature dependence of the partition coefficients, thermodynamic functions were calculated. The partitioning of SP into the acidic bicelles is enthalpy-driven, as it is for small unilamellar vesicles and dodecylphosphocholine micelles, while peptide partitioning into a large unilamellar vesicle is entropy-driven. This may mean that the size of lipid membranes is a more important factor for peptide binding than the surface curvature and surface charge density.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.171-177
• /
• 1995

In this paper, the deformation method for inner and outer races of rollr-bearing bymeans of the warm precision forging is investigated. We adapted the process designsuch as following that, toincrease Die life, reduce heat transfer through conduction and the eccentricity of preform in warm forging of bearing gace, the bottom portion of billet is formed during upsetting process. Then it is backward extruded, and thus obtained ring preform is formed by combined extrusion. Also, we compared it with the froming method in China and Japan, and we have known it is more excellent method. Basides, this forming method is simulated by UBST which is based on the merits of UBET nd FEM. The results show that it is easy to know the exact location of neutral surface through the inspection of streamline during combined extrusion, and the velocity vector distribution along the surface of velocity discontinuity is investigationed. Also the effectiveness of this method is proved by te experiment using model material that is Plasticine.