• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.353-354
• /
• 2014

An active vibration control technique of a time-varying cantilever beam is proposed in this study. A simple in-house coil sensor instead of expensive commercial sensors was used to measure the vibrational displacement of the beam. Active band pass filters and artificial neutral net works detect the frequencies, amplitudes, and phases of the main vibration mode. The time constants of the low pass filter representing the positive position feedback controller are updated in real-time, which generates the control voltage input to actuate the piezoelectric actuator and suppress the vibration. An experiment was successfully performed to verify the algorithm for a cantilever beam, which fundamental natural frequency arbitrarily varies between 9 Hz ~ 18 Hz. The present active vibration suppression technique can be applied to variety of structures which undergoes large variation of dynamic characteristics while operating.

• Journal of Welding and Joining
• /
• v.31 no.5
• /
• pp.7-14
• /
• 2013

The legitimacy of dominating factor in the high accuracy prediction of welding distortion was investigated for butt welding and fillet welding. When out-of-plane distortion was measured by the experiment objecting to butt welding, if tack welding was easily performed, the position of a neutral axis was variously changed by the irregularity. Then, there have been a case that out-of-plane distortion was generated in the unexpected direction. This case should be especially noted. New model for the experiment was proposed so as to solve this problem. As it was elucidated by the case of fillet welding, it was verified that the analysis should be carried out with satisfying the yield condition (especially at high temperature above 700 degree Celsius) and with closely simulating the penetration shape (heat input in weld metal) in order to solve the proposition that is the high accuracy prediction of welding distortion. It was confirmed that residual stress is highly predicted because welding distortion is highly predicted, too.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.17 no.3
• /
• pp.126-130
• /
• 2004

Oculomotor nerve palsy presents itself with sudden onset unilateral ptosis and inability to turn the eye upward, downward, or inward, which causes visual disturbances. Strabismus caused oculomotor nerve palsy refers to muscle imbalance that results in improper alignment of the visual axes of the two eyes It may be divided into paralytic and non paralytic strabismus. paralytic strabismus is primarily a neurologic problem. Characteristic clinical disturbances result from lesions of the third, fourth, and sixth cranial nerves. Lesions of the third nerve result in a paralysis of lateral or outward movement and a crossing of the visual axes. Objective: This study was designed to evaluate the effects of oriental medicine therapy on a peripheral oculomotor nerve palsy. Methods & Result: The clinical data was analyzed on a patient with oculomotor nerve palsy whose main symptoms were right side ptosis and inability to turn the eye inward. The patient was treated by the electroacupucture(4Hz frequency, intensity was adjusted so that localized muscle contractions could be seen). As the result, symptoms are improved remarkably. Conclusion: The patient showed right eye ptosis and unilateral deviation of the right eye ball in neutral position. After acupuncture treatment and electroacupuncture treatment, the ptosis and deviation of the patient's right eye was recovered six weeks after the onset. The study suggests that oriental medicine therapy is significantly effective on the treatment of peripheral oculomotor nerve palsy.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.1
• /
• pp.63-76
• /
• 2013

The purpose of this study was to investigate the effects of knee joint muscle fatigue and overweight on the angular displacement and moments of the lower limb joints during landing. Written informed consent forms, which were approved by the human subject research and review committee at Dong-A University, were provided to all subjects. The subjects who participated in this study were divided into 2 groups: a normal weight group and an overweight group, consisting of 15 young women each. The knee joint muscle fatigue during landing was found to increase the dynamic stability by minimizing the movements of the coronal and horizontal planes and maintaining a more neutral position to protect the knee. The effect of body weight during landing was better in the normal weight group than in the overweight group, with the lower limbs performing their shock-absorbing function in an efficient manner through increased sagittal movement. Therefore, accumulated fatigue of knee joint muscles or overweight may be highly correlated with the increase in the incidence of injury during landing after jumping, descending stairs, and downhill walking.

• Journal of Arbitration Studies
• /
• v.23 no.4
• /
• pp.139-167
• /
• 2013

Mediation, which is part of ADR, is a method used to settle disputes amicably by employing a third party who is in a neutral position. Utilization and attention on meditation are increasing in place of litigation and arbitration owing to its effectiveness in terms of time, cost, and effectiveness in achieving an amicable settlement. As to Korea, mediation at the civil level was employed by the KCAB in July 2012 but its utilization was in ABC stage compared to mediation at the governmental and judicial levels. Based on this situation, this study reviewed the guideline and system of the KCAB through a comparison of the management system between the KCAB and AAA where mediation was in good use. This study further suggests solutions as to the development of an international commercial mediation system First, the KCAB rule is needed to create a mediation language, mediation place, mediator internationalization, and so on. Second, a system backup is necessary to ensure the enforceability and effectiveness of mediation. Third, a unified mediation law in Korea is desirable for the harmonization of mediations at civil, governmental, and judicial levels. The unified mediation law, if it is made, may lead to an international base where this requirement exists. Fourth, advertising the merits of mediation to the public is necessary. Fifth, securing specialized mediators and relevant training are essential. If the above requirements are implemented, Korea would advance in international commercial disputes.

• Journal of Biomedical Engineering Research
• /
• v.19 no.4
• /
• pp.417-422
• /
• 1998

The study was explored socket pressure distributions on a trans-femoral amputee with a suction socket in static and dynamic situations. Even when the amputee stood in the anatomically neutral position, significant pressure concentrations were observed in the lateral, medial, and posterior planes of the socket. During free level walking, a significant shifting pattern of pressure concentration areas was observed. High socket pressure was observed in the lateral, medial-anterior and posterior walls during mid-stance or push-off period. Socket pressure measurement will be one of the good tool to determine the optimal socket-limb interface.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.2
• /
• pp.266-273
• /
• 1999

The maximum work capacity at various shoulder angles was estimated in terms of joint moment through maximum voluntary contraction (MVC) measurement, and the result was compared to workload computed from 3-D static lifting model (3DSSPP) based upon national institute of safety and health (NIOSH) lifting guideline (1991). The electromyography (EMG) of anterior/posterior deltoid and trapezius muscle was also recorded to study the function of individual muscle during asymmetric shoulder lifting. Psychophysical workload was measured to observe the difference from MVC or biomechanical estimation. An apparatus was constructed for the study and twenty five trials including five flexion angles and five add/abduction angles were performed isometrically. Results indicated that MVC at 30 degree of flexion was the strongest whereas MVC at 120 degree was the weakest. In case of add/abduction, MVC decreased to 77 to 89 % during add/abduction compared to the MVC at neutral position. Regarding the normalized EMG value, a substantial increase was observed at 30 and 60 degree abduction. More importantly, the shoulder moment computed from maximum permissible limit (MPL) was greater than the moment at MVC condition during 30 degree adduction. Current result can be used as a reference information for a safe workplace design to prevent the shoulder from an excessive work load in industry.

• Journal of mucopolysaccharidosis and rare diseases
• /
• v.2 no.2
• /
• pp.50-51
• /
• 2016

Combining basal insulin therapy with a glucagon-like peptide-1 receptor agonist (GLP-1 RA) has clear clinical advantages, and is supported by the latest EASD/ADA position statement (1). IDegLira is a once-daily combination of the basal insulin, degludec, and the GLP-1RA, liraglutide, in one pen. The DUAL phase 3 clinical trial program provides important evidence about the efficacy and safety of IDegLira in three different populations of patients with type 2 diabetes (T2D): insulin naïve subjects uncontrolled on oral antidiabetic drugs (OADs), subjects uncontrolled on OAD(s) and a GLP-1 RA, and subjects uncontrolled on OAD(s) and basal insulin. Treatment with IDegLira reduced mean HbA1c to below the EASD/ADA treatment target of 7.0% in all five trials. The mean reduction of HbA1c from baseline ranged from 1.3% and 1.9%. IDegLira resulted in weight loss for subjects uncontrolled on basal insulin, was weight neutral for subjects on OADs and weight gain was minimal (2 kg) for subjects previously treated with a GLP-1 RA. Rates of hypoglycaemia were low across all the trials, particularly considering the level of glycaemic control achieved.

• Advances in materials Research
• /
• v.6 no.3
• /
• pp.279-301
• /
• 2017

Thermo-mechanical vibration characteristics of in homogeneousporous functionally graded (FG) micro/nanobeam subjected to various types of thermal loadings are investigated in the present paper based on modified couple stress theory with consideration of the exact position of neutral axis. The FG micro/nanobeam is modeled via a refined hyperbolic beam theory in which shear deformation effect is verified needless of shear correction factor. A modified power-law distribution which contains porosity volume fraction is used to describe the graded material properties of FG micro/nanobeam. Temperature field has uniform, linear and nonlinear distributions across the thickness. The governing equations and the related boundary conditions are derived by Extended Hamilton's principle and they are solved applying an analytical solution which satisfies various boundary conditions. A comparison study is performed to verify the present formulation with the known data in the literature and a good agreement is observed. The parametric study covered in this paper includes several parameters such as thermal loadings, porosity volume fraction, power-law exponents, slenderness ratio, scale parameter and various boundary conditions on natural frequencies of porous FG micro/nanobeams in detail.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.1
• /
• pp.57-62
• /
• 1998

We have synthesized a 17-residue peptide with the amino acid sequence RQMKEDAKGKSEEELAD corresponding to residues 84-100 of chicken skeletal troponin C. This stretch of the protein sequence is in the middle one-third of the 32-residue 9-turn α-helix that connects the two globular domains of the dumbell-shaped molecule and includes the D/E linker helix. We describe here the solution conformation of the helix linker as studied by circular dichroism (CD) and two-dimensional nuclear magnetic resonance (2-D NMR) spectroscopy. The NOE connectivities together with the vicinal $^3J_{N{\alpha}}$ coupling constants suggest that the peptide exists in a fast conformational equilibrium among several secondary structure: a nascent helix near the N-terminus, a helix, and a substational population of extended and random coil forms. In addition, two interresidue α-α NOEs are observed suggesting a bent structure with a bend that includes the single glycine in position 92. These results are consistent with the ideas that in neutral solution the D/E linker region of the central helix in troponin C can adopt a helical conformation and the central helix may have a segmental flexibility around Gly 92.