• 제어로봇시스템학회논문지
• /
• 제6권4호
• /
• pp.313-319
• /
• 2000

As the interest of flexible manufacturing systems and computer integrated manufacturing systems increase, the distribution of centralized control systems using industrial control networks is getting more attention. In this paper, we investigate the rate-based traffic control of industrial control networks to improve the performance regarding the throughput, fairness, and error rates. Especially, we consider the protocol of Lon-$Works^{(TM)}$ which consists of all OSI 7-layers and supports various communication media at a low cost. Basically, the proposed rate-based traffic control system is closed loop by utilizing the feedback channel errors, which shows improved performance when compared with other industrial control networks commonly operated in open loop. To this end, an additional network node called monitoring node is introduced to check the channel status without increasing the channel load. The Proposed control loop is in effect whenever the feedback channel error becomes greater than an admittable value. We demonstrate the improved performance of the controlled network system in view of throughput and fairness measures by implementing the lab-scale network system based on LonWorks and through the experimentation upon it.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권4호
• /
• pp.272-282
• /
• 2001

Uncertainties are the main reasons of deterioration of contour control of industrial articulated robot arm. In this paper, a high-precision contour control method was proposed to overcome some main uncertainties, such as torque saturation, system delay dynamics, interference between robot links, friction, and so on. Firstly, each considered factor of uncertainties was introduced briefly. Then proper realizable objective trajectory generation was presented to avoid torque saturation from objective trajectory. According to the model of industrial articulated robot arm, construction of Gaussian neural network controller with considering system delay dynamic, interference between robot links and friction was explained in detail. Finally, through the experiment and simulation, the effectiveness of proposed method was verified. Furthermore, based on the results it was shown that the Gaussian neural network controller can be also adapted for the various kinds of friction and high-speed motion of industrial articulated robot arm.

• 정보보호학회논문지
• /
• 제27권1호
• /
• pp.25-38
• /
• 2017

국가 주요 기반 시설을 포함하여 보안사고 발생 시 심각한 피해를 발생시킬 수 있는 산업 제어시스템의 특성에 의해 세계적으로 많은 보안 침해 사고가 발생하고 있다. 따라서 산업 제어시스템 네트워크에 오가는 트래픽은 감시되고, 분석되어 공격을 사전에 파악하거나 사고 이후 재빠른 대응을 수행할 수 있어야 한다. 본 논문에서는 제어시스템 프로토콜인 DNP3를 대상으로 모든 공격의 가능성을 갖는 트래픽들을 대상으로 합리적인 의심이 가능하도록 네트워크 포렌식 관점에서 시각화를 연구를 수행해 정상행위기반 룰을 정의하고 시각화 요구사항을 도출했다. 이를 기반으로 제어시스템 네트워크상에 캡처된 패킷 파일을 대상으로 DDoS와 같은 급작스런 네트워크 트래픽의 변화를 일으키는 경우 혹은 정상행위를 위반한 공격이 탐지 가능한 시각화 도구를 개발했고, 디지털본드 패킷과 같이 치명적인 공격이 포함된 네트워크상에서 성공적으로 비정상행위 탐지를 수행하였다.

• 대한임베디드공학회논문지
• /
• 제8권6호
• /
• pp.295-301
• /
• 2013

In this paper, we propose a real-time centralized soft motion control system for high speed and precision robot control. The system engages EtherCAT as high speed industrial motion network to enable force based motion control in real-time and is composed of software-based master controller with PC and slave interface modules. Hard real-time control capacity is essential for high speed and precision robot control. To implement soft based real time control, The soft based master controller is designed using a real time kernel (RTX) and EtherCAT network, and servo processes are located in the master controller for centralized motion control. In the proposed system, slave interface modules just collect and transfer all sensor information of robot to the master controller via the EtherCAT network. It is proven by experimental results that the proposed soft motion control system has real time controllability enough to apply for various robot control systems.

• 제어로봇시스템학회논문지
• /
• 제6권7호
• /
• pp.594-601
• /
• 2000

EIA-709.1 Control Network Protocol is the basic protocol of LonWorks systems that is emerg-ing as a fieldbus device. In this paper the protocol is implemented by using VHDL with FPGA and C program on an Intel 8051 processor. The protocol from the physical layer to the network layer of EIA-709.1 is im-plemented in a hardware level,. So it decreases the load of the CPU for implementing the protocol. We verify the commercial feasibility of the hardware through the communication test with Neuron Chip. based on EIA-709.1 protocol which is used in industrial fields. The developed protocol based on FPGA becomes one of IP can be applicable to various industrial field because it is implemented by VHDL.

• 품질경영학회지
• /
• 제29권4호
• /
• pp.38-53
• /
• 2001

In resolving industrial quality control problems, a vector of multiple quality characteristic variables is involved rather than a single variable. However, it is not guaranteed that a multivariate control chart based on statistical methods can monitor abnormal signal in case that small changes of relationship between each variables causes abnormal production process. Hence a quality control system for real-time monitoring of the multi-dimensional quality characteristic vector under a multivariate normal process is needed to enhance tile production system quality performance. A pattern analysis approach based on self-organizing map (SOM), an unsupervised learning technique of neural network, is applied to the design of such a quality control system. In this study we present a new material quality control system based on pattern analysis approach and illustrate the effectiveness of proposed system using actual electronic company material data.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.77-79
• /
• 2000

Industrial communication networks have attracted much attention in the area of decentralized control systems for factory automation and computer integrated manufacturing. In this paper, we investigate the rate-based traffic control of industrial communication networks employing LonWorks to improve the performance measures of throughput, fairness, and error rates. To this end, we utilize the Feedback channel information through the additional network monitoring node and make the overall system closed-loop. We demonstrate the improved performance of the controlled network system by the experimentation upon an implemented lab-scale network system.

• International Journal of Computer Science & Network Security
• /
• 제23권1호
• /
• pp.71-77
• /
• 2023

In the current Internet system, there are many problems using anonymity of the network communication such as personal information leaks and crimes using the Internet system. This is why TCP/IP protocol used in Internet system does not have the user identification information on the communication data, and it is difficult to supervise the user performing the above acts immediately. As a study for solving the above problem, there is the study of Policy Based Network Management (PBNM). This is the scheme for managing a whole Local Area Network (LAN) through communication control for every user. In this PBNM, two types of schemes exist. As one scheme, we have studied theoretically about the Destination Addressing Control System (DACS) Scheme with affinity with existing internet. By applying this DACS Scheme to Internet system management, we will realize the policy-based Internet system management. In this paper, to realize it, concept of the Internet PBNM Scheme is proposed as the final step.

• International Journal of Computer Science & Network Security
• /
• 제23권11호
• /
• pp.1-7
• /
• 2023

In the current Internet system, there are many problems using anonymity of the network communication such as personal information leaks and crimes using the Internet system. This is why TCP/IP protocol used in Internet system does not have the user identification information on the communication data, and it is difficult to supervise the user performing the above acts immediately. As a study for solving the above problem, there is the study of Policy Based Network Management (PBNM). This is the scheme for managing a whole Local Area Network (LAN) through communication control for every user. In this PBNM, two types of schemes exist. As one scheme, we have studied theoretically about the Destination Addressing Control System (DACS) Scheme with affinity with existing internet. By applying this DACS Scheme to Internet system management, we will realize the policy-based Internet system management. In this paper, basic system design for PBNM scheme for multi-domain management utilizing data science and AI is proposed.

• 한국전자통신학회논문지
• /
• 제9권1호
• /
• pp.137-142
• /
• 2014

산업제어시스템(Industrial Control System)은 전력, 가스, 수도, 하수, 오일 및 교통시스템과 같은 국가주요기반시설 및 산업분야에서 원거리에 산재된 시스템의 효과적인 원격모니터링 및 제어를 위해 필수적으로 사용되는 컴퓨터 기반의 시스템을 말한다. 고도로 발전된 IT 및 네트워크 관련 기술들이 산업제어시스템에 적용되어 효율성을 높이는 장점이 있지만, 일반적인 IT 환경에서의 각종 정보시스템이 가지는 사이버보안 취약성 및 사고의 가능성이 증대되는 단점을 가지게 되었다. 산업제어시스템에서 통상적으로 발견되는 취약점은 우선순위, 발생빈도 및 영향의 심각성들과는 무관하게 정책 및 절차, 플랫폼 및 네트워크 등으로 분류된다. 이러한 취약점들은 첫째, 패스워드의 강제 사용등과 같은 보안 정책 및 절차를 적용함으로서 취약점을 경감 시킬 수 있다. 둘째로, 운영체제 및 응용프로그램의 패치 적용, 물리적인 접근제어, 보안프로그램 사용등과 같은 다양한 보안통제를 적용함으로서 취약점을 경감 및 완화 시킬 수 있다. 셋째로, 심층방호개념의 네트워크 설계, 네트워크 통신의 암호화, 네트워크 트래픽 제한, 네트워크 장비에 대한 물리적 접근제어 방법 등과 같은 다양한 보안통제를 적용함으로서 취약점을 제거하거나 완화 시킬 수 있다.