• Convergence Security Journal
• /
• v.8 no.4
• /
• pp.41-49
• /
• 2008

VoIP is a service that changes the analogue audio signal into a digital signal and then transfers the audio information to the users after configuring it as a packet; and it has an advantage of lower price than the existing voice call service and better extensibility. However, VoIP service has a system structure that, compared to the existing PSTN (Public Switched Telephone Network), has poor call quality and is vulnerable in the security aspect. To make up these problems, TLS service was introduced to enhance the security. In practical system, however, since QoS problem occurs, it is necessary to develop the VoIP security system that can satisfy QoS at the same time in the security aspect. In this paper, a user authentication VoIP system that can provide a service according to the security and the user through providing a differential service according to the approach of the users by adding AA server at the step of configuring the existing VoIP session is suggested. It was found that the proposed system of this study provides a quicker QoS than the TLS-added system at a similar level of security. Also, it is able to provide a variety of additional services by the different users.

• Smart Structures and Systems
• /
• v.6 no.7
• /
• pp.835-849
• /
• 2010

This study investigated propagation characteristics of piezo-activated guided waves in an aluminium rectangular-section tube for the purpose of damage identification. Changes in propagating velocity and amplitude of the first wave packet in acquired signals were observed in the frequency range from 50 to 250 kHz. The difference in guided wave propagation between rectangular- and circular-section tubes was examined using finite element simulation, demonstrating a great challenge in interpretation of guided wave signals in rectangular-section tubes. An active sensor network, consisting of nine PZT elements bonded on different surfaces of the tube, was configured to collect the wave signals scattered from through-thickness holes of different diameters. It was found that guided waves were capable of propagating across the sharp tube curvatures while retaining sensitivity to damage, even that not located on the surfaces where actuators/sensors were attached. Signal correlation between the intact and damaged structures was evaluated with the assistance of a concept of digital damage fingerprints (DDFs). The probability of the presence of damage on the unfolded tube surface was thus obtained, by which means the position of damage was identified with good accuracy.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.5
• /
• pp.9-17
• /
• 2013

This paper presents the design of the educational router system. This system is designed and implemented to support network configuration and embedded programming technology of the user on Internet. Not only Static routing protocol but also a kind of dynamic routing protocols such as OSPF and RIP and firewall have been programmed for education based on ethernet interface. ADS 1.2 as debugging environment, uC/OS-ii as RTOS and C language as development language are used. The educational procedures is compile, loading of static routing protocol, a kind of dynamic routing protocols such as OSPF and RIP and firewall program already supplied. Thereafter the verification is checked by using "ping" test to allow for demo operation such as hands-on training procedure. Finally programming procedure similar with demo operation of static routing protocol, a kind of dynamic routing protocols such as OSPF and RIP and packet filtering function is educated step by step.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.5
• /
• pp.103-111
• /
• 2010

This paper proposes an efficient data transmission strategy using adaptive-tier low transmission power schedule in a TDMA-based ad hoc MAC protocol. Since the network resource of ad hoc networks has the characteristic of reassignment due to the multiple interferences and the contention-based limited wireless channel, the efficient time slot assignment and low power transmission scheme are the main research topics in developing ad hoc algorithms. Based on the proposed scheme of interference avoidance when neighbor clusters transmit packets, this paper can minimize the total energy dissipation and maximize the utilization of time slot in each ad hoc node. Simulation demonstrates that the proposed algorithm yields 15.8 % lower energy dissipation and 4.66% higher time slot utilization compared to the ones of two-tier conventional energy dissipation model.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.17-24
• /
• 2005

Traditional Internet applications such as FIP and E-mail are increasingly sharing bandwidth with newer, more demanding applications such as Web browsing, IP telephony, video conference and online games. These new applications require Quality of Service (QoS), in terms of delay, loss and throughput that are different from QoS requirements of traditional applications. Unfortunately, current Active Queue Management (AQM) approaches offer monolithic best-effort service to all Internet applications regardless of the current QoS requirements. This paper proposes and evaluates a new AQM technique, called MCDT that provides dynamic and separated buffer threshold for each Applications, those are FTP and e-mail on TCP traffic, streaming services on tagged UDP traffic, and the other services on untagged UDP traffic. Using a new QoS metric, our simulations demonstrate that MCDT yields higher QoS in terms of the delay variation and a packet loss than RED when there are heavy UDP traffics that include streaming applications and data applications. MCDT fits the current best-effort Internet environment without high complexity.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.9-16
• /
• 2011

This paper represents an interworking architecture for keeping the VLC audio quality between Worldwide Interoperability for Microwave Access (WiMAX) and IEEE 802.11 Mobile Ad hoc Network (MANET) where both mobile routers and mobile nodes are moving dynamically. Systematic performance analysis on the interworking architecture has been conducted by using OPNET simulator to show the results such as Packet Delivery Ratio (PDR) and throughput. Based on simulation results, when the number of MANET nodes is small, PDR remains relatively stable even though data packets increase. However, with the many MANET nodes, PDR decreases as data traffic increases. Throughput is affected by the number of MANET nodes. Especially when the MANET node density has increased further, throughput is much higher, but it is not affected by the mobility speed. However, FTP download and upload response time is not affected much by both the number of MANET nodes and the mobility speed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.1-8
• /
• 2004

A simple AMC (Adaptive Modulation and Coding) technique using ARQ (Automatic Repeat Request) for a MIMO (Multiple Input Multiple Output) system is proposed which does not require the additional feedback. In addition, the proposed AMC technique is different from the conventional technique in the aspect of considering the MCS (Modulation and Coding Scheme) level from the previous packet. The proposed technique can discard fewer amounts of unsuitable packets than the conventional technique. In the proposed system not only same rate control method for transmit antennas but also individual rate control method can be applied. The performance of the proposed technique is verified under a MIMO-OFDM (Orthogonal Frequency Division Multiplexing) system based on WLAN (Wireless Local Area Network), IEEE 802.11a. The results of the computer simulation show that a MIMO system with the proposed technique achieves higher throughput than one with a fixed transmission rate.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.3
• /
• pp.9-15
• /
• 2011

U-healthcare system has an aim to provide reliable and fast medical services for patient regardless of time and space by transmitting to doctors a large quantity of vital signs collected from sensor networks. Existing u-healthcare systems can merely monitoring patients' health status. In this paper, we describe the implementation and validation of a prototype of a u-health monitoring system based on a wireless sensor network. This system is easy to derive physiologically meaningful results by analyzing rapidly vital signs. The monitoring system sends only the abnormal data of examinee to the service provider. This technique can reduces the wireless data packet overload between a monitoring part and service provider. The real-time bio-signal monitoring system makes possible to implement u-health services and improving efficiency of medical services.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10A
• /
• pp.839-846
• /
• 2011

Link Adaptation should select the best modulation and coding scheme (MCS) which gives the highest throughput as channel conditions vary. Several link adaptation algorithms for wireless local area network (WLAN) have been proposed but for the future WLAN systems such as 802.11n system, these algorithms do not guarantee the best performance. In this paper, we propose a new link adaptation algorithm in which an MCS level is chosen by the received SNR plus the offset value obtained from the transmission results. The performance of proposed algorithm is simulated by an IEEE 802.11n system. From the analysis, we conclude the proposed algorithm performs better than the well-known link adaptation algorithms such as auto rate fallback and general SNR-based techniques. Particularly, the proposed algorithm improves throughput when the packet error ratio (PER) is constrained for fast fading channels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1C
• /
• pp.37-47
• /
• 2009

When H.264 encoded video streams are transmitted over wireless network, packet loss is unavoidable. Responding on this environment, we propose methods to recover missed motion vector in the decoder: At first, A candidate vector set for missing macroblock is estimated from high correlation coefficient of neighboring motion vectors and missing block vectors the algorithm clusters candidate vectors through distances amongst motion vectors of neighboring blocks. Then the optimal candidate vector is determined by the median value of the clustered motion vector set. In next stage, from the candidate vector set, the final candidate vector of missing block is determined it has minimum distortion value considering directions of neighboring pixels' boundary. Test results showed that the proposed algorithm decreases the candidate motion vectors $23{\sim}61%$ and reduces $3{\sim}4sec$ on average processing(decoding) time comparing the existing H.264 codec. The PSNR, in terms of visual quality is similar to existing methods.