• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권2호
• /
• pp.313-329
• /
• 2011

To provide a seamless network to customers, Internet service providers must promptly detect and control abnormal traffic. One approach is to shorten the traffic information measurement cycle. However, performance degradation is inevitable if traffic measurement servers merely shorten the cycle and measure all traffic. This paper presents a software architecture that can measure traffic more frequently without degrading performance by estimating the level of abnormal traffic. The algorithm in the architecture estimates the values of the interface group objects in MIB by using the IP group objects thereby reducing the number of measurements and the size of measured data. We evaluated this architecture on part of Internet service provider's IP network. When the traffic was measured 5 times more than before, the CPU usage and TPS of the proposed scheme was 7% and 41% less than that of the original scheme while the false positive rate and false negative rate were 3.2% and 2.7% respectively.

• 한국항행학회논문지
• /
• 제17권6호
• /
• pp.664-671
• /
• 2013

본 논문에서는 항공기내에서 전력을 무선으로 측정할 수 있는 AEMS(Zigbee electric power measurement monitoring system)시스템을 제안한다. AEMS시스템은 현재 상용화되고 있는 전력 측정 시스템을 분석하여 이를 보완하고 항공기내에서도 전력 변화를 쉽게 알 수 있도록 최근 가장 이슈가 되는 스마트폰과 모니터링 시스템을 연결하여 설계하였다. 또한, 실시간 전력 측정 시스템을 도입하여 전기 사용량을 실시간으로 제어함으로써 보다 실용성 있는 전력계측 시스템을 구축하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.95-97
• /
• 2005

This paper deals with the implementation of walking for a humanoid robot by ZMP measurement using wireless sensor network. ZMP is measured by FSR sensors which are mounted at each corner of a sole. The wireless sensor network collects the sensor data according and exchanges robot information between host PC and a robot system. The master controller mounted on robot body receives trajectory data from the host PC via sensor network and drives the joint motor based on trajectory data. The time scheduler of the master controller controls the events at the ratio of 100ms. With this configuration, the walking of the humanoid robot KHR-1 could be realized successfully.

• Asian Journal for Public Opinion Research
• /
• 제1권2호
• /
• pp.103-127
• /
• 2014

This study reviews existing research on the measurement of and the relationship between political diversity and political participation. It addresses the inconsistency in the arguments of existing studies researching the influence of political diversity on political participation. It attempts to find the cause in the variety of approaches to conceptualize and operationalize the two variables. As the measure of political diversity, political network heterogeneity and network attributes are discussed in detail in specific relation to political participation. As for political participation, an in-depth analysis of various ways to understand different forms of political involvement is presented. Implications for public opinion research are discussed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.53-56
• /
• 2002

In this paper, we study the network structure that can guarantee the end-to-end quality of service in the Explicit multicast network. In order to guarantee the end-to-end quality of service, we adopt the end-to-end measurement based admission control (EMBAC) scheme. For the effective measurement of the network state and minimum influence on the current data traffic, the queue structure, which the drop precedence in assured forwarding (AF) Per hop behavior (PHB) of the differentiated service (Diffserv) is applied to, is proposed. Through a simulation, we show that EMBAC can make tile controlled load service in tile AF PHB applied Xcast network, and the qualify of the admitted traffic is guaranteed. In addition, the performance of the EMBAC is changing according to the selling parameter of AF PHB.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.473-477
• /
• 2008

In this paper, we introduce the positioning methods using the grid sensor network. The basic operational principle of grid sensor network can be the wireless communication using the sensor node attached on the objects. Sink node receives the environmental information (e.g., temperature, humidity and so on), and transmits the information to the core database. Since the grid sensor network basically uses wireless communication, it is necessary to observe the place where grid sensor nodes to be installed. In this sense, we carried out the practical measurement on the wireless propagation in an applicable field. In addition, link budget study and SNR estimation works were done in accordance with the results from the measurement.

• 융합보안논문지
• /
• 제12권6호
• /
• pp.11-17
• /
• 2012

네트워크보안 성능평가는 복잡하고 다양한 시스템 환경에서 특정한 단일성능 측정 만으로는 성능평가 측정자체의 의미와 평가결과의 신뢰성이 한계일 수 밖에 없다. 본 논문에서는 보안 QoS의 MOS 측정기법을 사용한 보안기능 만족도 측정방법을 제시한다. 그 내용은 네트워크보안 QoS 만족도에 대한 MOS(Mean Opinion Score) 평가사양 및 운용방법을 개발하여 향후 정보시스템에 대한 고객의 만족도 평가에 활용될 수 있는 QoS 측정/분석 모델을 운용현장에서 활용토록한다. 시스템공급자(개발업체)와 시스템소비자(사용자) 모두가 성능측정 결과를 이용할 수 있도록 가능한 수준의 객관화된 형태의 기준과 방법체계를 개발한다. 개발내용은 보안기능, 네트워킹 기능과 이 두 기능을 종합적으로 평가하는 3개영역의 성능이 상호 연계되는 성능측정 방법론이다. 본연구의 제안 방법론을 사용하여 체계적인 측정환경을 설계 할 경우 운용시스템상에서 보안 QoS의 만족도 산출이 가능하다. 앞으로 다양한 성능측정 기준과 성능측정 방법을 추가적으로 확장하여 네트워크 보안시스템 만족도 평가방법을 업그레이드 시켜나가야 할 것 이다.

• 한국정보통신학회논문지
• /
• 제14권1호
• /
• pp.156-166
• /
• 2010

인터넷과 IP 네트워크 기술의 발전은 IPTV, VoIP와 같은 IP Network을 통한 융합화된 새로운 서비스형태를 창출하게 되었다. 특히 차세대 IP분야인 IPv6의 발전은 인터넷 사용자들의 증가로 인한 IP 주소 고갈의 문제를 해결해 줄 것이며, 보안, QoS 및 대용량의 대역폭등 높은 수준의 서비스 품질을 요구하는 IPTV Network에서는 그 중요성 매우 높아지고 있다. 본 논문에서는 IPv6 네트워크 환경 하에서 다양한 라우팅 프로토콜들에 대하여, 사용자 관점에서의 객관적 화질 평가방법인 PSNR을 이용하여 IPv6 네트워크에서 최적의 영상 품질을 서비스 할수 있는 기준을 제시하고자 한다.

• 대한인간공학회지
• /
• 제24권3호
• /
• pp.43-52
• /
• 2005

A two-dimensional posture measurement system was developed to evaluate the risks of work-related musculoskeletal disorders(MSDs) easily on various conditions of work. The posture measurement system is an essential tool to analyze the workload for preventing work-related musculoskeletal disorders. Although several posture measurement systems have been developed for workload assessment, some restrictions in industry still exist because of its difficulty on measuring work postures. In this study, an image recognition algorithm was developed based on a neural network method to measure work posture. Each joint angle of human body was automatically measured from the recognized images through the algorithm, and the measurement system makes it possible to evaluate the risks of work-related musculoskeletal disorders easily on various working conditions. The validation test on upper body postures was carried out to examine the accuracy of the measured joint angle data from the system, and the results showed good measuring performance for each joint angle. The differences between the joint angles measured directly and the angles measured by posture measurement software were not statistically significant. It is expected that the result help to properly estimate physical workload and can be used as a postural analysis system to evaluate the risk of work-related musculoskeletal disorders in industry.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.86-93
• /
• 2004

This paper presents the remote measurement of the ECU signals adopted with KWP 2000 protocol using the wireless communication technique of bluetooth. The bluetooth technology will be the most promising network paradigm which can open the new area in the information technology. Especially, bluetooth module is able to link all the electrical products and personal computers to cellular phone or PDA. This research has a try to design a wireless measurement model of ECU signal based on the car telemery system using bluetooth device. In order to measure the ECU signals, we designed the interface circuits which is able to communicate between the ECU system and the terminal circuits according to the ISO, SAE regulation of communication protocol standard. A microprocessor S3c341 OX is used for the system control and communication of ECU signals. The embedded system software is programmed to measure the ECU signals using the ARM compiler and ANCI C based on Micro/OS-II kernel to communicate between two bluetooth modules using bluetooth stack. The remote measurement of ECU signals using the bluetooth was designed and implemented to evaluate the performance of wireless network to the transmit measurement data. The possibility for the remote measurement of the self diagnosis signals of ECU adopted with KWP2000 protocol verified through the developed systems and algorithms in embedded system.