• Journal of Digital Convergence
• /
• v.16 no.3
• /
• pp.275-289
• /
• 2018

It is necessary to develop a bridgehead port for trading with northern countries to promote trade through the East Sea because the East Sea Rim economic bloc around the Northeast Asia including South Korea, China, Russia, Japan, and North Korea has a high growth potential in the future. Therefore, this study aims to suggest a strategic direction to enhance the competitiveness of Donghae Port through reinforcement of container cargoes by conducting Importance-Performance Analysis (IPA) for stakeholders of Donghae Port. The analysis results suggest that it is necessary to improve the five evaluation factors: attractiveness of container and bulk volumes, appropriate ratio of export/import container quantities, frequency of vessel entry and diversity of sea routes, convenience of complex linked transportation, and competitiveness of cargo handling equipment. The implications of this study are as follows. First, it is necessary to continuously research the current status of container and bulk cargo volumes of the port and ways to increase the absolute cargo volume. Second, we need to consider realistic alternatives to improve the ratio of export/import container quantities. Third, in terms of network, we should establish a service improvement plan to increase the frequency of port calls and the diversity of sea routes. Furthermore, incentives should be provided to increase the trade volume of Donghae Port through strengthened complex linked transportation function. Finally, it is urgently necessary to provide investment support for container handling equipment as an essential requirement for the activation of the container cargoes in Donghae Port.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.271-277
• /
• 2020

There are increasing cases of monitoring the structural response of structures using multiple sensors. However, owing to cost and management problems, limited sensors are installed in the structure. Thus, few structural responses are collected, which hinders analyzing the behavior of the structure. Therefore, a technique to predict responses at a location where sensors are not installed to a reliable level using limited sensors is necessary. In this study, a numerical study is conducted to predict the seismic response of low-rise buildings using limited information. It is assumed that the available response information is only the acceleration responses of the first and top floors. Using both information, the first natural frequency of the structure can be obtained. The acceleration information on the first floor is used as the ground motion information. To minimize the error on the acceleration history response of the top floor and the first natural frequency error of the target structure, the method for predicting the mass and stiffness information of a structure using the genetic algorithm is presented. However, the constraints are not considered. To determine the range of design variables that mean the search space, the parameter prediction method based on artificial neural networks is proposed. To verify the proposed method, a five-story structure is used as an example.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.3
• /
• pp.139-150
• /
• 1998

Due to development of science and telecommunication with wide-spread computer supply, it could be done through computer automatically instead of manpower-work for paper transportation & paper approval. It is developed to so-called Factory Automation. Further, it is developed to Office Automation. Trading companies & concerned trade authorities are interested in Trade Automation that such technique is applied to trade work. Generally, Trade Automation means to realize paperless trade by exchanging electronic papers through inter-computers after concerned trade operators transformed various papers to electronic papers that computer could read. In case Trade Automation fix in the trade business, it is expected one of innovations among traditional paper work of trade business, namely without going import-export authorities, Customs office, Banks. Shipping companies, Marine insurance companies on hand-carrying papers, it could be fast, simple, correct to finish every trade procedures such as commercial business, foreign currency, customs clearance, transportations, insurance. terms of payment, etc., with Electronic Data Interchange through computer facilities. Especially, telecommunication for trade form could be helpful to proceed trade paper with one-run-method Further we can anticipate 6 effects for Trade Automation as belows : First, as explained just above articles, with completion for Trade Automation, every trade procedures can be done by computer. so, time to work can be diminished. namely. logistics cost including accessory costs for trade procedures can be saved much. Second, viewing to private enterprise, effect of Office Automation can be maximized and rapid, correct exchange for various trade informations could raise efficiency of enterprise management establishing rational production, storage, transportation and could raise competition improving standard for consumers's service. Third, establishing Trade Automation systems makes it easier piling-up of harbor cargo by pre-transmission of electronic paper & trade informations make it possible to finish customs clearance in advance and can be dispatched upon cargo arrival. Fourth, most of concerned trade authorities such as import-export approval office. financial authorities, transport & insurance companies concentrated in Metropolitan area(Seoul, In -Cheon, Kyung-Ki). Therefore, in case Trade Automation could be realized. it is possible to proceed trade business instantly in every country area by computer facilities. Also. it contribute well-balanced development for suburb. region area by suburb dispersion of trading companies. Fifth, on the way to Trade Automation establishment & its enlargement process. producing enormous demand for over-all telecommunication such as hardware. software. network makes opportunity to progress telecommunication industry & concerned industries. Finally. Trade Automation accelerate change of employment structure leading unnecessary labors on the industries of office & logistics to manufacturing area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.912-921
• /
• 2005

Optical burst switching(OBS) is a promising solution for building terabit optical routers and realizing If over WDM. Channel scheduling Algorithm for reduce contention is one of the major challenges in OBS. We address the issue of how to provide basic burst channel scheduling in optical burst switched WDM networks with fiber delay lines(FDLs). In OBS networks the control and payload components or a burst are sent separately with a time gap. If CHP arrives to burst switch node, because using scheduling algorithm for data burst, reservation resources such as wavelength and transmit data burst without O/E/O conversion, because contention and void between burst are happened at channel scheduling process for data burst that happened the link utilization and bust drop probability Existent proposed methods are become much research to solve these problems. Propose channel scheduling algorithm that use Release Time of bust to emphasize clearance between data and data dissipation that is happened in data assignment in this treatise and maximize bust drop probability and the resources use rate (RTUC : Release Time Unscheduled Channel). As simulation results, Confirmed that is more superior in terms of data drop and link utilization than scheduling algorithm that is proposed existing. As simulation results, confirmed improved performance than scheduling algorithm that is proposed existing in terms of survival of burst, efficiency resource and delay. However, In case load were less, degradation confirmed than existent scheduling algorithm relatively, and confirmed that is superior in data drop aspect in case of load increased.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.6
• /
• pp.122-130
• /
• 2010

Seventy percent of Korea's national territory is covered with mountains, and the land is frequently exposed to typhoons and localized torrential downpours, particularly in July through September. For this reason, slope failure is one of the most frequent types of natural disasters in Korea. To prevent the damage caused by slope failure, the Korean government, academia and industry have strived together to develop and install a wired system for monitoring slope failures. However, conventional wired monitoring systems have been reported to have limitations, such as possible system errors caused by lightning, and the difficulties of restoration and management of the systems. To solve these problems, this research suggests a USN-based monitoring system for slope failures. First, the trend of slope measurement and USN technology was analyzed, and then the current status of damage caused by slope failures in Korea was reviewed. Next, a USN-based monitoring scenario for slope failures, incorporating both USN and slope monitoring technique, was developed. Finally, sensors were decided based on the developed scenario. It is expected that the results of this study will be utilized as fundamental data for the development of monitoring prototype systems for slope failures in the future. The development of the USN-based monitoring system for slope failures and its application in the field will also ultimately contribute to the prevention of slope failures and the minimization of related damage.

• Spatial Information Research
• /
• v.9 no.1
• /
• pp.51-72
• /
• 2001

It is frequently pointed out that the conventional field survey for natural environment has may limitations in terms of positional accuracy, real-time GIS data acquisition, and economic efficiency. The aim of this research was to develop an on site real-time mapping technique that enables the surveyor to input data in the field. The idea is based upon the recent trends in the field of Telecommunication and Information Technology that uses a GPS, wireless network computing, moving computing, etc. A virtual office approach has been adopted, in which a portable computer is linked to a GPS and field workers record data on the computer at the site and analyse data on site. This field mapping system has shown to be much less susceptible to the positional accuracy than that of th conventional approach. The Graphic User Interface, in particular, were ideally suited to combining positional information with attribute data which changes with every survey points. This interface allows users to interactively display and query GIS layers reproduced from the past survey results. The GIS database stored in the virtual office will serve to carry out a highly reliable survey since it could play a crucial role in identifying temporal and spatial changes occurred in the site. It is expected that integrated utilization of field data among the related agencies would be increased much more than before since the virtual office survey would be a powerful tool to ensure geometric fidelity in GIS database creation process. This paper also discusses the limitations and future direction of the present prototype research.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.128-138
• /
• 1996

In this paper, the Doppler phase error due to the relative velocity between a satellite and the earth station in communications using a low earth orbit mobile satellite is detected. The performance of BPSK system in the presence of Rician fading channel environment with Doppler phase error, inter- ference and noise is compared with that of the system disturbed by Doppler phase error and noise only, And adopted coding techniques are Hamming, BCH, RS and convolution codes. The expression of error rate performance of BPSK system is derived as the type of complementary error function. The main conclusion that can be drawn from this analysis is that Rician fading channel environment with Do- ppler phase error and interference, noise effect yields severe performance degradation then Doppler phase error and noise effect in satellite communication channel. The conclusion can be drawn from this analysis is that using coding technique then noncoding. And using the numerical calculation, we give a quantitative insight how much the satellite communication channel parameters degrade the system per- formance. Furthermore it is shown that an appropriate transmission power control for the performance enhancement is beneficial to the new satellite communication system planning.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.750-761
• /
• 2011

Currently, 3DTV technologies are being developed as the future services of the HD digital broadcast environment. As one of the various research topics to apply 3DTV technologies to the conventional broadcasting network, methods to configure stereoscopic videos are being studied. In this paper, we proposed a method to broadcast high quality stereoscopic videos based on analysis of a method to add a stereoscopic descriptor to the PMT of MPEG-2 transport streams and a method to transmit stereoscopic videos by the expansion of MPEG-C part 3 which are from precedent studies. The proposed technique maintains compatibility with conventional MPEG-2 transport streams by showing only reference video for models that do not support 3D broadcasting. Therefore, the compatibility between conventional broadcasting and stereoscopic videos should make this method useful when activating 3D services in the communications and broadcasting area

• Journal of Internet Computing and Services
• /
• v.19 no.5
• /
• pp.1-11
• /
• 2018

The Blockchain is a technique that prevents data from being manipulated and guarantees the integrity and reliability of the data by all participants in the network jointly owning and validating the data. Since the Blockchain characterized by security, scalability and transparency, it is used in a variety of fields including logistics, distribution, IoT and healthcare, including remittance. In particular, there is a growing interest in smart contract that can create different forms of contracts and automate implementation based on Blockchain. Smart Contract can be used to pre-programme contracts and are implemented immediately when conditions are met. As a result, digital data can be more reliable. In this paper, we are conducting a study on the smart contract design as a way to solve such problems as illegal misuse of funds on virtual currency, which has become an issue recently. Through this process, we applied the customer identification and money laundering prevention process using smart contract, and then check the possibility of preventing money laundering and propose the ASM (AML SmartContract Mechant) design.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.3
• /
• pp.9-18
• /
• 2009

Recently, due to the advanced technologies of mobile devices and wireless communication, there are many studies on telematics and LBS(location-based service) applications. because moving objects usually move on spatial networks, their locations are updated frequently, leading to the degradation of retrieval performance. To manage the frequent updates of moving objects' locations in an efficient way, a new distributed grid scheme, called DS-GRID (distributed S-GRID), and k-NN(k-nearest neighbor) query processing algorithm was proposed[1]. However, the result of k-NN query processing technique may be invalidated as the location of query and moving objects are changed. Therefore, it is necessary to study on continuous k-NN query processing algorithm. In this paper, we propose both MCE-CKNN and MBP(Monitoring in Border Point)-CKNN algorithmss are S-GRID. The MCE-CKNN algorithm splits a query route into sub-routes based on cell and seproves retrieval performance by processing query in parallel way by. In addition, the MBP-CKNN algorithm stores POIs from the border points of each grid cells and seproves retrieval performance by decreasing the number of accesses to the adjacent cells. Finally, it is shown from the performance analysis that our CKNN algorithms achieves 15-53% better retrieval performance than the Kolahdouzan's algorithm.