• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.49-56
• /
• 2006

This paper describes the design and the verification of IEEE 802.15.4 LR-WPAN 2.4GHz Physical layer for Ubiquitous Sensor Network(USN). We designed the Carrier Frequency Offset(CFO) compensation satisfied the frequency tolerance of IEEE 802.15.4 LR-WPAN and the adaptive matched filter that re-setting of the threshold for the symbol synchronization of the various USN environment. The multiplications is reduced 1/16 by this method each other at i, q phases and has 0.5dB performance improvement in detection probability. Proposed baseband system is designed with verilog HDL and implemented using FPGA prototype board.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.1
• /
• pp.70-77
• /
• 2008

On the wireless sensor network MAC protocols, one of main issues is energy enciency. Since several asynchronous wireless sensor network MAC protocols with short preamble sampling scheme can be operated without setting the timing synchronization among neighbor nodes, it consumes a little energy for maintaining protocols. However, each node encounters either preamble or data overhearing problem, because each node wakes up in a different time and must check whether the frame is being sent to itself or not. To solve this overhearing problem, we newly propose B-MAC++ that can reduce the overhearing energy consumption by using short preambles with destination address and payload length. from simulation results, we show that the proposed B-MAC++ has advantageous in terms of power consumption efficiency over other asynchronous wireless sensor network MAC protocols.

• The Journal of Society for e-Business Studies
• /
• v.15 no.4
• /
• pp.49-58
• /
• 2010

The wireless sensor network technology becomes one of core technologies to make it possible to implement various e-business applications. Energy efficiency is an important issue in wireless sensor networks. IEEE 802.15.4, a representative international standard for wireless sensor networks, provides the beacon enabled mode for energy-efficient communication. However, the beacons may conflict each other when the network is of multi-hop topology such as mesh or cluster-tree topology with beacon-enabled mode. The beacon conflict causes the failure of synchronization between sensor nodes, and affects other nodes in the network in that unsynchronized nodes cannot participate in communication. In this paper, we suggest an energy-efficient beacon scheduling for the wireless sensor networks. Nodes can save their energy duringperiod and prevent beacon conflict using beacon scheduling. We implement the scheduling using QualNet, and evaluate the performance under mesh topology networks. It turns out that the proposed scheduling may improve the energy efficiency in the networks.

• Journal of Broadcast Engineering
• /
• v.24 no.2
• /
• pp.329-340
• /
• 2019

Recently, broadcasting technologies have evolved as high-quality AV services such as domestic terrestrial UHD(Ultra-High Definition) broadcasting have been increasing, and broadcasting standards have been newly defined. Also, as network technology develops, contents are consumed not only in the country but also the world. Accordingly, content insertion technology, which is a method of providing suitable contents in accordance with the national and local environments, will be needed. This paper proposes a content insertion service system model and synchronization scheme using ATSC(Advanced Television Systems Committee) 3.0 Event Signaling standard under heterogeneous network environment of broadcasting network and internet network based on transmission standard DASH(Dynamic Adaptive Streaming over HTTP)/ROUTE(Real time Object delivery Over Unidirectional Transport) and MMT(MPEG Media Transport) of terrestrial UHD broadcasting. It also verifies that the service operates in an environment that meets the broadcast standard.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.57-64
• /
• 2006

Multiprocessor system on chip (MPSoC) platforms has set a new innovative trend for the SoC design. Quality of service parameters and performance matrix are leading to the adoption of new design methodology for SoC, which will incorporate highly scalable, reusable, predictable, cost and energy efficient platform not only for underlying communication backbone but also for the entire system architecture of NOC. Like the layered architecture for the communication backbone of NOC, we have proposed the entire system architecture for NOC to be a seven layered architecture in itself. Such a platform can separate the domain specific issues which will model concurrency along with the synchronization issues more effectively. For such a layered architecture, model of computation will provide a framework to that can model concurrency and synchronization issues which are natural for any application. Therefore it becomes extremely important to use a right computation model in a specific NOC region.

• Journal of Korea Multimedia Society
• /
• v.11 no.2
• /
• pp.197-205
• /
• 2008

TCP packets occupy over 90% of current Internet traffic thus understanding of TCP throughput is crucial to understand Internet. Under the TCP congestion regime, heterogeneous flows, i.e., flows with different round-trip times (RTTs), that share the same bottleneck link will not attain equal portions of the available bandwidth. In fact, according to the TCP friendly formula, the throughput ratio of two flows is inversely proportional to the ratio of their RTTs. It has also been shown that TCP's unfairness to flows with longer RTTs is accentuated under loss synchronization. In this paper, we show that, injecting bursty background traffic may actually lead to new type of synchronization and result in unfairness to foreground TCP flows with longer RTTs. We propose three different metrics to characterize traffic burstiness and show that these metrics are reliable predictors of TCP unfairness.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1069-1073
• /
• 2016

The Internet of Things (IoT) is the interconnection of uniquely identifiable embedded computing devices within the existing Internet infrastructure. IoT is expected to offer advanced connectivity of devices, systems, and services that goes beyond machine-to-machine communications and covers a variety of protocols, domains, and applications. Key system-level features that IoT needs to support can be summarized as device heterogeneity, scalability, ubiquitous data exchange through proximity wireless technologies, energy optimized solutions, localization and tracking capabilities, self-organization capabilities, semantic interoperability and data management, embedded security and privacy-preserving mechanisms. Time information is a critical piece of infrastructure for any distributed system. Time information and time synchronization are also fundamental building blocks in the IoT. The IoT requires new paradigms for combining time and data. This paper reviews conventional time keeping mechanisms in the Internet and presents issues to be considered for combining time and data in the IoT.

• Smart Structures and Systems
• /
• v.11 no.3
• /
• pp.261-282
• /
• 2013

Structural health monitoring (SHM) is an application area of Wireless Sensor Networks (WSNs) which usually needs high data communication rate to transfer a large amount of monitoring data. Traditional sink node can only process data from one communication channel at the same time because of the single radio chip structure. The sink node constitutes a bottleneck for constructing a high data rate SHM application giving rise to a long data transfer time. Multi-channel communication has been proved to be an efficient method to improve the data throughput by enabling parallel transmissions among different frequency channels. This paper proposes an 8-radio integrated sink node design method based on Field Programmable Gate Array (FPGA) and the time synchronization mechanism for the multi-channel network based on the proposed sink node. Three experiments have been performed to evaluate the data transfer ability of the developed multi-radio sink node and the performance of the time synchronization mechanism. A high data throughput of 1020Kbps of the developed sink node has been proved by experiments using IEEE.805.15.4.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.213-221
• /
• 2010

Recently, as the scale of the cultural content business market is being growed, it required that we should introduce the Korean music culture which is unique and competitive cultural contents to the worldwide. This paper proposes a Samulnori Ensemble System (SES), using a touch interface which plays the Korean traditional musical instruments. A SES consists of the Control Device which supports touch functions, the Performance Manager that detects signals from the Control Device and plays a melody, and the Communication Manager making a ensemble among the possible devices. Also, using the Network Time Protocol which is part of Synchronization Manager can be paly different speed communication environments. We utilized multi-touch functions to operate the system. We also implemented multi-touch interface and multi-play with other player for fun and interesting who are not interested Samulnori.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.620-627
• /
• 2004

As h-bridge multilevel inverter is connected with series of single phase power cell, so it obtain high voltage using low voltage power semi-conductor and output voltage similar to sine wave. In this topology, the number of power cell increases in proportion to the output voltage level. Therefore, there are drawbacks that are responsibility against operating ability of main controller and signal wire increase. However, we can overcome this problems by the substitution of serial communication for the PWM signal in power cell control. Additionally, it has merits of reliability and maintenance. This paper deals with the synchronization and phase-shift method of power cell PWM using CAN(Controller Area Network) communication interrupt in H-bridge multilevel inverter. The advantages of proposed method are signal-line simplification using serial communication between main controller and cell controller, burden reduction in main controller, modularization of power cell, easy protection of each power cell, expandability improvement and reliability increase of control signal and power cell. This paper establishes propriety and reliability of proposed method through experiment of 13-level H-bridge multilevel inverter.