• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.583-594
• /
• 2006

The reliability concept of wireless sensor network is essential to get exactly actual data from the ubiquitous environment. A rollback technique for the self-healing helps to increase it. However, a fault can occur in wireless sensor network when to use a previous rollback technique because it is designed just for the local system. So, checkpoint protocols are suggested in order to use a rollback technique in the network without the fault. However, there is trade-off among performance overhead, power consumption, and memory overhead for each of protocols. Hence, we suggest a novel global checkpoint protocol, so called address log based protocol(ALBP), based on an asynchronous protocol. It is a platform based protocol to reduce power consumption, performance overhead, and memory overhead which are the most of consideration in wireless sensor network.

• The KIPS Transactions:PartC
• /
• v.13C no.6 s.109
• /
• pp.685-690
• /
• 2006

This paper compares the performance of the unicast routing protocol and the broadcast routing protocol in a small-sized wireless multi-hop network, such as home network. Normally, ad-hoc routing protocols are designed for general wireless multi-hop networks, not being said to be optimized for the small-sized ad hoc network. This paper compares some unicast routing protocols and optimal broadcast routing protocol, and shows the result. The result of the simulation says the broadcast routing protocol shows better performance than the ad-hoc routing protocols in the small-sired wireless multi-hop network. Especially, the result shows that the broadcast protocol has higher packet delivery ratio and lower packet latency than unicast routing protocols

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1059-1067
• /
• 2006

AODV(Ad-hoc On-demand Distance Vector) routing protocol was devised for use of mobile nodes in Ad-hoc network. When we use the AODV routing protocol in Ad-hoc networks with high mobility, disturbance of optimized route path and link break occur. In order to solve the shortcomings, this paper proposes a new routing protocol in which new routing control messages are added to the existing AODV. The proposed protocol minimizes link break and transmission delay while is able to secure the optimized route path constantly in changes of network topology The performance of the proposed routing protocol was evaluated by using us2 network simulator. The actual Ad-hoc network test bed provides us the most reliable experimental data for Ad-hoc networks. In order to support this experimental environment, the dissertation also developed an efficient embedded system on which AODV routing protocol, NAT, Netfilter can run and other event message can be verified without declining efficiency. The correct operation of AODV routing protocol has been verified in both the Ad-hoc network test bed in which the embedded system was used, and Ad-hoc networks linked with Ethernet backbone network.

• Journal of Internet Computing and Services
• /
• v.10 no.2
• /
• pp.153-160
• /
• 2009

One of the major challenges of designing a dissemination protocol for Wireless Sensor Networks(WSNs) is energy efficiency. Recently, this issue has received much attention from the research community, and SPMS, which outperforms the well-known protocol SPIN, specially is a representative protocol. In addition, one of many characters of SPMS is the use of the shortest path to minimize the energy consumption. However, since it repeatedly uses the same path as the shortest path, the maximizing of the network lifetime is impossible, though it reduces the energy consumption. In this paper, we propose a dissemination protocol using probability-based clustering which guarantees energy-efficient data transmission and maximizes network lifetime. The proposed protocol solves the network lifetime problem by a novel probability function, which is related to the residual energy and the transmission radius between nodes. The simulation results show that it guarantees energy-efficient transmission and moreover increases the network lifetime by approximately 78% than that of SPMS.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.7
• /
• pp.1230-1251
• /
• 2011

This document specifies a new IPv6 deployment protocol called CHANC, which stands for Configuring Hosts to Auto-detect (IPv6, IPv6-in-IPv4, or IPv4) Network Connectivity. The main part is an application level tunneling protocol that allows Internet Service Providers (ISPs) to rapidly start deploying IPv6 service to their subscribers whom connected to the Internet via IPv4-only access networks. It carries IPv6 packets over HTTP protocol to be transmitted across IPv4-only network infrastructure. The key aspects of this protocol are: offers IPv6 connectivity via IPv4-only access networks, stateless operation, economical solution, assures most firewall traversal, and requires simple installation and automatic configuration at customers' hosts. All data packets and routing information of the IPv6 protocol will be carried over the IPv4 network infrastructure. A simple application and a pseudo network driver must be installed at the end-user's hosts to make them able to work with this protocol. Such hosts will be able to auto-detect the ISP available connectivity in the following precedence: native IPv6, IPv6-in-IPv4, or no IPv6 connectivity. Because the protocol does not require changing or upgrading customer edges, a minimal cost in the deployment to IPv6 service should be expected. The simulation analysis showed that the performance of CHANC is pretty near to those of native IPv6, 6rd, and IPv4 protocols. Also, the performance of CHANC is much better than that of D6across4 protocol.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.147-148
• /
• 2007

BICC protocol is a relay protocol adaptable to ATM and IP based core networks compared to ISUP protocol to TDM networks. Using BICC protocol, multi-rate bearer traffic such as voice and video can flow in the relay core networks. BICC protocol is standardized as WCDMA circuit switching networks in 3GPP Release 4. Thus KTF is now operating core networks using BICC protocol. In this paper, we describe the background and characteristics of BICC protocol. We also provide the status of KTF WCDMA core networks using BICC. To show the efficiency of BICC protocol an analytical simulation is given in which the results can be expected by intuitive observation.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.123-126
• /
• 2016

Energy efficiency in heterogeneous network is considered as one of the main issues when deploying the wireless sensor network. In heterogeneous network, the random distribution of initial energy at each node could lead to an instability of the network. Therefore, a resonable policy must be established in order to maintain the fairness in energy consumption and extend the working time of each node in the network. In this paper, we evaluate the performance of the distributed clustering protocol (DCP) in heterogeneous network on different scenarios. Simulation results are compared with the results of a LEACH protocol in a heterogeneous network. In addition, the performance of system in heterogeneous network are also compared with the homogeneous network to illustrate the effect of imbalance in the initial energy on the life time of each node in the system. The result illustrates that the DCP protocol demonstrates better performance than LEACH protocol in both the heterogeneous and the homogeneous networks.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.113-118
• /
• 2017

As interest in mobile devices and networks has increased recently, voice over internet protocol (VoIP) service, which is a technology for transmitting voice data using an existing internet protocol (IP) network, has rapidly spread, Cheap voice call service has become possible. As the digital broadcasting service becomes popular, hybrid fiber coaxial (HFC) network technology, which uses broadband cable network through fusion of broadcasting and communication, utilizes existing communication system and network equipment to provide various new services such as interactive broadcasting service. Therefore, if UGS-AD is applied to VoCM and RTPS is applied to MTA in order to guarantee the quality of voice data in actual HFC Internet service network, it is possible to smoothly perform voice data transmission in narrow upstream band which is a problem in actual commercial HFC network We also proposed a method to improve VoIP service by improving QoS of voice data in HFC Internet service network.

• The KIPS Transactions:PartC
• /
• v.19C no.1
• /
• pp.29-38
• /
• 2012

Due to rapid spread of smart phones and SNS(Social Network Service), using of Internet applications has increased and taking up bandwidth more than 3G network's capacity recently. This caused reduction of speed and service quality, and occurred strong needs that backbone network company to increasing investment costs. Also a great rise of mobile network users causing identity management problems on mobile service provider through mobile network. This paper proposes advanced IDM3G[1] - to solve user ID management and security problems on mobile internet application services over 3G network and more - authentication management protocol. $I^2DM$ protocol breakup loads which made by existing IDM3G protocol's mutual authentication via mobile operator, via sending some parts to internet application service provider, enhancing mobile and ID management of service provider and network load and process load from information handling and numbers of transmitting packets, to suggest more optimized protocol against further demanding of 3G mobile network.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.24-29
• /
• 2011

Comparing conventional one-way relaying, two-way relaying scheme with network coding can achieve high throughput by reducing the transmission time. Coded cooperation protocol, which is a algorithm that uses coding on physical layer, can achieve high reliability. In this paper, we propose coded cooperation protocol over two-way relay network. Simulation results show proposed protocol has better performance in terms of reliability and throughput compare with conventional amplify and forward protocol. Also, with same throughput, proposed protocol has better performance in terms of reliability compare with the conventional hybrid decoded and forward protocol.