Mobile computing has such characteristics as portability, wireless network, mobility, etc. These characteristics cause various problems to mobile terminals like frequent disconnection, high error rate, and varying network status. These problems motivate us to develop an adaptive error control mechanism for supporting multimedia service in mobile computing environment. In this paper, we propose the Adaptive Error Control(AEC) scheme using client's buffer size and current error rate. After categorizing the status into four groups according to client's buffer size and current error rate, this scheme applies an appropriate error control scheme to each status. In this scheme, thresholds of buffer size and error rate are determined by the data transmission time, play rate and average VOP size, and by the probability of error for a sequence of packets. The performance of proposed scheme is evaluated by flaying MPEG-4 files on an experimental client/server environment, respectively. The results show that error correcting rate is similar to other schemes while the time for correcting error reduce a little. In addition, the size of data for correcting error is decreased by 23% compared with FEC and Hybrid FEC, respectively. Theses results demonstrate that the proposed scheme is more suitable in mobile computing environment with small bandwidth and varying environment than existing schemes.
Kim, Dong-Young;Jung, Tae-Ho;Choi, Soon-Shin;Jee, Yong
Journal of the Institute of Electronics Engineers of Korea SD
/
v.37
no.1
/
pp.8-18
/
2000
We presented a BGA(Ball Grid Array) package for RF circuit modules and extracted its electrical parameters. As the frequency of RF system devices increases, the effect of its electrical parasitics in the wireless communication system requires new structure of RF circuit modules because of its needs to be considered of electrical performance for minimization and module mobility. RF circuit modules with BGA packages can provide some advantages such as minimization, shorter circuit routing, and noise improvement by reducing electrical noise affected to analog and digital mixed circuits, etc. We constructed a BGA package of ITS(Intelligent Transportation System) RF module and measured electrical parameters with a TDR(Time Domain Reflectometry) equipment and compared its electrical parasitic parameters with PCB RF circuits. With a BGA substrate of 3${\times}$3 input and output terminals, we have found that self capacitance of BGA solder ball is 68.6fF, and self inductance 146pH, whose values were reduced to 34% and 47% of the value of QFP package structure. S11 parameter measurement with a HP4396B Network Analyzer showed the resonance frequency of 1.55GHz and the loss of 0.26dB. Routing length of the substrate was reduced to 39.8mm. Thus, we may improve electrical performance when we use BGA package structures in the design of RF circuit modules.
The Journal of Korean Institute of Communications and Information Sciences
/
v.36
no.10B
/
pp.1222-1232
/
2011
RFID/USN core technologies for ubiquitous computing, It is possible to use variety of sensors, direct processors, and wireless network technology that easily collect the actual physical environment and can monitor information remotely. Especially the healthcare industry and services combined with U-Healthcare that have international competitiveness in the medical field. But the USN, standard management system of RFID such as EPCglobal architecture framework, the lack of interoperability issues and the global sensor network implementation. In this paper, a system for managing sensor nodes of the USN, USN of SIP-based management system (UMS) is proposed. UMS support Session Initiation Protocol (SIP), provide session management and mobility capabilities, that is based on Internet standard protocol. UMS architecture of the existing SIP architecture, added USN User Agent (UUA) and the USN Name Server (UNS) that the location of sensor nodes should be possible to trace. UUA on behalf of the limited capacity of the location of the sensor nodes to perform the registration process, UNS to track the location of the sensor nodes to provide name resolution services. The proposed management system has the advantage of internet applications such as Web services interoperability and easy to recycle existing resources with other SIP-based because it uses the Internet standard protocol SIP. In this paper we propose is based on the UMS blood temperature management system is verified through the scenario.
Journal of the Economic Geographical Society of Korea
/
v.12
no.4
/
pp.319-343
/
2009
This paper considers some kinds of socio-spatial constraints and strategies for overcoming them which immigrant workers in Korea have experienced in their work-place and life-space, with an analysis of questionnaire data and of direct interview materials on them. Though they appear somewhat satisfactory or positive with their work-place, this can be seen as a hypocritical or false attitude rather than a real one: they are forced to work with long hours (more than 70 hours per week) and rigid controls in the other' territory. Their daily life-spaces also are severe: they can be hardly embedded in an existing community with a sense of place due to serious institutional and interaction constraints, even though they seem to have a basic mobility to survive in life-spaces. In order to escape or alleviate such local constraints, they try to constitute multi-scalar (local, trans-regional, and transnational) networks, and to find informations and means to resolve or cope with them. However, this kind of endeavors of immigrant workers to make a trans-national network and social space has a limitation for them to be free entirely from constraints, which might be strengthened with a lack of geographical knowledge of them. Then immigrant workers in Korea live ineluctably with not only hybrid national identity but also with disturbed local identity in an aliened workplace and life-spaces.
Journal of the Korea Institute of Information and Communication Engineering
/
v.13
no.3
/
pp.572-579
/
2009
A monitoring system needs many parameters to increase devices for monitoring data and to support various services. In particular, monitoring the status of a device in a wireless mobile environment has a difficulty in displaying multi data in a limited screen size, and transfer of the status data of a device into a network is largely related with network traffic. The research aims at designing a control board that collects data in order to effectively manage a greenhouse environment system. Also, the research tries to appropriately operate devices, environment data monitoring, and the control of each device by realizing a multiplexed interface based on a web. Thus, in the case in which a distributed client was a computer, monitoring and control were obtained with a web browser through the Lab VIEW web server of a server or local control module in order to effectively monitor and control according to the status of a user. In the case in which a client was a PDA, application of a wireless mobile considering the scale and data processing capacity of a displayer was connected. As a result of the research, we could confirm a satisfactory outcome from the viewpoint of a human-centered design by supplying adaptability and mobility according to the environment of a user.
The Transactions of the Korea Information Processing Society
/
v.6
no.10
/
pp.2587-2596
/
1999
Recently, by the extension of skills like LAN, the wireless telecommunication network and the satelite services make it possible for the mobile computer users to access a database. A method to use the replicated database on a server to get new data without missing any information has been being studied. So far we have used the Static Replica Allocation(SRA) for the replication which is the method of the replication on the server. This method is to replicate the data on the replica server after a moving host is transferred to a cell. Since the network of the SRA is very good, and if there are few moving users, no trouble will happen. But if there is no moving users in a cell, the data will not be shared. Therefore, this paper is about the study of the method of relocation after replicating the data to the cells for the users(User Select Replica Allocation : USRA). We also analyze the access rate and the possibility which are closely related to the moving frequency of the mobile hosts and the numbers of the cells. As a result, We show that the 120% lower access cost and the 40%∼50% gains are achieved from the low mobility
An instable wireless channel condition causes more packet losses and retransmissions due to interference, fading, station mobility, and so on. Therefore video streaming service over a wireless networks is a challenging task because of the changes in the wireless channel conditions and time-constraints characteristics of the video streaming services. To provide efficient video streaming over a wireless networks, QoS-enhanced MAC protocol, IEEE 802.11e, is standardized recently. Tn this paper, we propose a new network-adaptive H.264 video streaming mechanism in the IEEE 802.11e wireless networks. To improve the quality of video streaming services, video stream has to adapt to the changes in the wireless channel conditions. The wireless channel conditions are estimated by the packet loss probability and informed to the application layer by the cross-layering. According to the wireless channel information, the video streaming application filters out the low-priority data. This adaptation mechanism efficiently uses system resources because it drops the low-priority data in advance. Therefore, our cross-layer design can provide improved video streaming services to the end-user. Through the implementation and performance evaluation, we prove that the proposed mechanism improves the QoS of the video streaming by providing the smoothed playback.
For extending of hot-spot of WLAN, (2) proposes internetworking scheme between wireless LAN (WLAN) and mobile ad-hoc network (MANET), which employ the same layer-2 protocol with different mode. Compared to internetworking schemes between UMTS (Universal Mobile Telecommunications Systems) and WLAN (3-4), the scheme from (2) has relatively low overhead and latencies because WLAN and MANET are physically and logically similar to each other. However, the mode switching algorithm proposed in r2] for internetworking between WLAN and MANET only considers signal strength and determines handoff, and mobile nodes following a zigzag course in pollution area may perform handoff at short intervals. Furthermore, (2) employs mobile IPv6 (MIPv6) at base, which brings still high delay on handoff and overhead due to signal message exchange. In this paper, we present optimized internetworking scheme between WLAN and MANET, modified from (2). To settle ping-pong handoff from (2), we propose adaptive mode switching algorithm. HMIPv6 is employed for IP connectivity and mobility service in WLAN, which solves some shortcomings, such as high handoff overhead and vulnerable security. For routing in MANET, OLSR is employed, which is a proactive Protocol and has optimally reduced signal broadcasting overhead. OLSR operates with current P protocol compatibly with no change or modification. The proposed internetworking scheme based on adaptive mode switching algorithm shows better performance than scheme from (2).
KIPS Transactions on Computer and Communication Systems
/
v.3
no.10
/
pp.337-350
/
2014
Internet-of-Things(IoT) is the computing paradigm converged with different technologies, where diverse devices are connected via the wireless network, acquire environmental information from their equipped sensors, and are actuated. IoT applications provide smart services to users by interacting with multiple devices connected to the network. IoT devices provide the simple set of the information and also offer smart services by collaborating with other devices. That is, IoT applications always interact with IoT devices which are becoming very popular at a fast pace. However, due to this fact, developing IoT application results in unconventional technical challenges which have not been observed in typical software applications. Moreover, since IoT computing has its own characteristics which are distinguished from other former paradigms such as embedded computing and mobile computing, IoT applications also reveal their own technical challenges. Therefore, we analyze technical challenges occurring in developing IoT applications and present effective solutions to overcome the challenges. To verify identified issues and presented solutions, we present the result of performing a case study of developing an IoT application. Through the case study, we verify how the unconventional technical issues are raised in a real domain and analyze effectiveness of applying the solutions to the application.
Journal of the Korea Institute of Information and Communication Engineering
/
v.12
no.11
/
pp.2105-2110
/
2008
Embedding the compact wearable units to monitor the health status of a person has been analysed as a convenient solution for the home health care. This paper presents a method to detect fall from the other activities of daily living and also to classify those activities. This kind of ambulatory monitoring of the elderly and people with limited mobility can not only provide their general health status but also alarms whenever an emergency such as fall or gait has been occurred and a help is needed. A timely assistance in such a situation can reduce the loss of life. This work shows a detailed analysis of the data received from a chest worn sensor unit embedding a 3-axis accelerometer and depicts which features are important for the classification of human activities. How to arrange and reduce the features to a new feature set so that it can be classified using a simple classifier and also improving the classification resolution. Principal component analysis (PCA) has been used for modifying the feature set and afterwards for reducing the size of the same. Finally a Neural network classifier has been used to analyse the classification accuracies. The accuracy for detection of fall events was found to be 86%. The overall accuracy for the classification of Activities or daily living (ADL) and fall was around 94%.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.