• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.219-222
• /
• 1996

During the navigation of mobile robot, one of the essential task is to determination the absolute location of mobile robot. In this paper, we proposed a method to determine the position of the camera from a landmark through the visual image of a quadrangle typed landmark using neural network. In determining the position of the camera on the world coordinate, there is difference between real value and calculated value because of uncertainty in pixels, incorrect camera calibration and lens distortion etc. This paper describes the solution of the above problem using BPN(Back Propagation Network). The experimental results show the superiority of the proposed method in comparison to conventional method in the performance of determining camera position.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.5
• /
• pp.550-557
• /
• 1999

This paper describes a road-following controller using the proposed neural network for autonomous vehicle. Road-following with visual sensor like camera requires intelligent control algorithm because analysis of relation from road image to steering control is complex. The proposed neural network, relative similarity modular network(RSMN), is composed of some learning networks and a partitioniing network. The partitioning network divides input space into multiple sections by similarity of input data. Because divided section has simlar input patterns, RSMN can learn nonlinear relation such as road-following with visual control easily. Visual control uses two criteria on road image from camera; one is position of vanishing point of road, the other is slope of vanishing line of road. The controller using neural network has input of two criteria and output of steering angle. To confirm performance of the proposed neural network controller, a software is developed to simulate vehicle dynamics, camera image generation, visual control, and road-following. Also, prototype autonomous electric vehicle is developed, and usefulness of the controller is verified by physical driving test.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1248-1250
• /
• 1996

The objective of camera calibration is to obtain the correlation between camera image coordinate and 3-D real world coordinate. Most calibration methods are based on the camera model which consists of physical parameters of the camera like position, orientation, focal length, etc and in this case camera calibration means the process of computing those parameters. In this research, we suggest a new approach which must be very efficient because the artificial neural network(ANN) model implicitly contains all the physical parameters, some of which are very difficult to be estimated by the existing calibration methods. Implicit camera calibration which means the process of calibrating a camera without explicitly computing its physical parameters can be used for both 3-D measurement and generation of image coordinates. As training each calibration points having different height, we can find the perspective projection point. The point can be used for reconstruction 3-D real world coordinate having arbitrary height and image coordinate of arbitrary 3-D real world coordinate. Experimental comparison of our method with well-known Tsai's 2 stage method is made to verify the effectiveness of the proposed method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.169-177
• /
• 2014

It is essential to support the image and video analysis technology such as motion detection since the DVR and NVR storage were adopted in the real time visual surveillance system. Especially the network camera would be popular as a video input device. The traditional CCTV that supports analog video data get be replaced by the network camera. In this paper, we present the design and implementation of video surveillance system that provides the real time motion detection by the video storage server. The mobile application also has been implemented in order to provides the retrieval functionality of image analysis results. We develop the video analysis server with open source library OpenCV and implement the daemon process for video input processing and real-time image analysis in our video surveillance system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.1
• /
• pp.21-30
• /
• 2011

In this paper, an effective method to detect the laser pointer on the screen using the neural network algorithm for implementing the human-computer interaction system. The proposed neural network algorithm is used to train the patches without a laser pointer from the input camera images, the trained neural network then generates output values for an input patch from a camera image. If a small variation is perceived in the input camera image, amplify the small variations and detect the laser pointer spot in the camera image. The proposed system consists of a laser pointer, low-price web-camera and image processing program and has a detection capability of laser spot even if the background of computer monitor has a similar color with the laser pointer spot. Therefore, the proposed technique will be contributed to improve the performance of human-computer interaction system.

• Journal of Sensor Science and Technology
• /
• v.13 no.1
• /
• pp.27-34
• /
• 2004

Camera calibration is an important and fundamental procedure for the application of a vision sensor to 3D problems. Recently many camera calibration methods have been proposed particularly in the area of robot vision. However, the reliability of data used in calibration has been seldomly considered in spite of its importance. In addition, a camera model can not guarantee good results consistently in various conditions. This paper proposes methods to overcome such uncertainty problems of data and camera models as we often encounter them in practical camera calibration steps. By the use of the RANSAC (Random Sample Consensus) algorithm, few data having excessive magnitudes of errors are excluded. Artificial neural networks combined in a two-step structure are trained to compensate for the result by a calibration method of a particular model in a given condition. The proposed methods are useful because they can be employed additionally to most existing camera calibration techniques if needed. We applied them to a linear camera calibration method and could get improved results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.4
• /
• pp.290-296
• /
• 2005

This paper presents the implementation of a crack tracking mobile robot. The crack tracking robot is built for tracking cracks on the pavement. To track cracks, crack must be detected by laser and camera sensors. Laser sensor projects laser on the pavement to detect the discontinuity on the surface and the camera captures the image to find the crack position. Then the robot is commanded to follow the crack. To detect crack position correctly, neural network is used to minimize the positional errors of the captured crack position obtained by transformation from 2 dimensional images to 3 dimensional images.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.2
• /
• pp.192-197
• /
• 2009

In this paper, we proposed the obstacle avoidance system using a single camera image and LM(Levenberg-Marquart) neural network fuzzy controller. According to a robot technology adapt to various fields of industry and public, the robot has to move using self-navigation and obstacle avoidance algorithms. When the robot moves to target point, obstacle avoidance is must-have technology. So in this paper, we present the algorithm that avoidance method based on fuzzy controller by sensing data and image information from a camera and using the LM neural network to minimize the moving error. And then to verify the system performance of the simulation test.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.135-145
• /
• 2012

This study is a research development case study on the free-standing Network based camera video recording DVR. The DVR devices till now have recorded data by converting and compressing analogue video to digital, but in the future, digital videos will be recorded directly through the network camera. Also, digital compressing methods are progressing from MPEG-4, MJPEG, to H.264 method, with products considering high definition compression efficiency, minimized data size, network compatibility, and fast pending time. According to this, in 2012, it is predicted that network camera and video devices throughout the world will outrun the current analogue devices. With this transition of technological environment and fast product pending speed, a new, quality focused design is required for product development including technical realization, reliability, high-definition, compression technology, will be essential. Manufacturers are researching a new direction for the product appearance. This study considers the actual end-users as the design target and through consumer survey on preferences, design needs and required elements necessary in the design development process are extracted. Furthermore, usability and preferred images were explored through literature study and market research. Through this research process, appropriate forms for the network based DVR were analyzed, and applied into the design development process. This product will take into consideration its competitiveness and the significance of USP(Unique Selling Proposition) which is the design supremacy and professional technical skills.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.3
• /
• pp.283-290
• /
• 2001

This paper demonstrates the performance of industrial precise measurement using the digital close-range photograrmmetric system based on a off-the-shelf CCTV-type CCD camera. The system was constructed with a CCD camera and a PC with a frame grabber, coupled with digital image mensuration and self-calibrating bundle adjustment techniques. An artificial fish reef with cubic shape was taken as an object for the application test of the system and the digital images were acquired on multi-station convergent network around the object. The geometric calibration of the CCD camera and the phototriangulation of the entire surface of the object was carried out simultaneously by means of self-calibrating bundle adjustment technique. Also the system comprising a high resolution still-video camera Kodak DCS, which high accuracy potential has been already established, were employed in similar network condition. Then the results from two different camera systems were compared in the accuracies of phototriangulation.