• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.368-371
• /
• 2003

A new accurate and reliable human-in-the-loop control by artificial neural network (ANN) for human assistance robot was proposed in this paper. The principle of human-in-the-loop control by ANN was explained including the system architecture of human assistance robot control the design of the controller the control process as well as the switching of the different control patterns. Based on the proposed method, the control of meal assistance robot was implemented. In the controller of meal assistance robote a feedforward ANN controller was designed for the accurate position control. For safety a feedback ANN forcefree control was installed in the meal assistance robot. Both controllers have taken fully into account the influence of human arm upon the meal assistance robote and they can be switched smoothly based on the external force induced by the challenged person arm. By the experimental and simulation work of this method for an actual meal assistance robote the effectiveness of the proposed method was verified.

• 한국산업융합학회 논문집
• /
• 제25권2_2호
• /
• pp.193-198
• /
• 2022

In this paper, we introduce the improved control method are communicated between a master and a slave robot in the teleoperation systems. When the master and slave robots are located in different places, time delay is unavoidable under the network environment and it is well known that the system can become unstable when even a small time delay exists in the communication channel. The time delay may cause instability in teleoperation systems especially if those systems include haptic feedback. This paper presents a control scheme based on the estimator with virtual master model in teleoperation systems over the network. As the behavior of virtual model is tracking the one of master model, the operator can control real master robot by manipulating the virtual robot. And LQG/LTR scheme was adopted for the compensation of un-modeled dynamics. The approach is based on virtual master model, which has been implemented on a robot over the network. Its performance is verified by the computer simulation and the experiment.

• 전자공학회논문지B
• /
• 제30B권1호
• /
• pp.18-28
• /
• 1993

Processes in the real-time distributed control systems share a network medium to exchange their data. Performance of feedback control loops in the real-time distributed control systems is subject to the network-induced delays from sensor to controller, and from controller to actuator. The network-induced delays are directly dependent upon the data sampling times of control components which share a network medium. In this study, an algorithm of determining data sampling times is developed using the "window concept". where the sampling datafrom the control components dynamically share a limited number of windows. The scheduling algorithm is validated through the aimulation experiments.

• 시스템엔지니어링학술지
• /
• 제4권2호
• /
• pp.45-54
• /
• 2008

This paper describes an operational concept of the network based future airborne force power using a systems engineering approach. The battlefield is changing to new system of systems that command and control by the network based BM/C4ISR. Also, it is composed of various sensors and shooters in an single theater. Future threats may be characterized as unmanned moving bodies that the strategic effect is great such as UAVs, cruise missile and tactical ballistic missiles. New threats such as low altitude stealth cruise missile may also appear. The implementation of future airborne force power network systems against these future threats is required to complex and integrated approach based on systems engineering. This work developed the operational concepts of the future airborne network system, and then derived the requirements for performing missions effectively. In addition, the scheme of future airborne force power network systems is presented.

• 제어로봇시스템학회논문지
• /
• 제13권11호
• /
• pp.1033-1039
• /
• 2007

In this paper, we design a terminal sliding mode controller based on self-recurrent wavelet neural network (SRWNN) for the second-order nonlinear systems with model uncertainties. The terminal sliding mode control (TSMC) method can drive the tracking errors to zero within finite time in comparison with the classical sliding mode control (CSMC) method. In addition, the TSMC method has advantages such as the improved performance, robustness, reliability and precision. We employ the SRWNN to approximate model uncertainties. The weights of SRWNN are trained by adaptation laws induced from Lyapunov stability theorem. Finally, we carry out simulations for Duffing system and the wing rock phenomena to illustrate the effectiveness of the proposed control scheme.

• 제어로봇시스템학회논문지
• /
• 제12궈1호
• /
• pp.60-65
• /
• 2006

Recently, various ubiquitous networking services are developed and implemented for easy living. In general, new ubiquitous networking services require the new infrastructure including equipments and devices. However, it is difficult to replace existing infrastructure and devices with new ones in the home or office because of cost and maintenance problems. In this paper, we developed small-size web based RF wireless communication systems for sensor network applications. The designed RF systems are implemented using commercial system on a chip (SoC) on existing infrastructure and devices. The developed systems are tested for light control and temperature sensing and they are applied to sensor network training courses for students and engineer as well as various practical applications.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.401-405
• /
• 1993

This paper presents a neuro adaptive control method for nonlinear dynamical systems based on artificial neural network systems. The proposed neuro adaptive controller consists of 3 layers artificial neural network system and parallel PD controller. At the early stage in learning or identification process of the system characteristics the PD controller works mainly in order to compensate for the inadequacy of the learning process and then gradually the neuro contrller begins to work instead of the PD controller after the learning process has proceeded. From the simulation studies the neuro adaptive controller is seen to be robust and works effectively for nonlinear dynamical systems from a practical applicational points of view.

• 제어로봇시스템학회논문지
• /
• 제13권10호
• /
• pp.933-939
• /
• 2007

Safety critical systems such as x-by-wire systems require in-vehicle network systems that can interconnect various sensors, actuators, and controllers. These networks need to have high data rate, deterministic operation, and fault tolerance. Recently, FlexRay protocol that is a time-triggered protocol has been introduced, and many automotive companies have been focusing on this protocol. This paper presents a design method of FlexRay network system and implementation of FlexRay-based motor control system.

• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.103-111
• /
• 2004

In this survey paper, we attempt to introduce the subjects of fuzzy logic and neural network technology for flight control systems based on completed and ongoing research programs other developed countries. Also, it is prepared with intention of providing the reader with an overview of related topics and a basic concepts of fuzzy logic and neural network control. The focus is on relatively practical control schemes realistically applicable in the area of flight control system design that could find its usage in the near future in our country. It is hoped that this paper will serve as a useful reference and even concepts provide solutions far current problems and future designs.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1123-1126
• /
• 2005

This paper introduces the key features of NCS (Network based Control System), which is quite a new concept in the industrial automation market. Two control systems "DCS" and "PLC" have been recognized as control systems used for process and factory automation during the past decades. However, the market requires more complex functionality, such as monitoring and operation, alarm handling and notification from remote locations using the Web or e-mail. Besides enhancing functionality, interoperability between each device and system is highly required since network and engineering tools provided by many vendors do not cooperate with each others, so that lots of conversion, reconfiguration and reprogramming are required when expanding systems. NCS can meet this requirement, installing leading-edged IT technology using international standards for network and engineering environment. NCS, which is a harmony of web functionality, networkability and a reliable control function, enables information integration and responding to the market's requirements with agility and high reliability.