• Journal of Digital Convergence
• /
• v.18 no.5
• /
• pp.179-186
• /
• 2020

The purposes of this paper were: 1) to identify the structural changes of the northeast Asia airport network caused by the pandemic of COVID-19 using social network analysis (SNA) and 2) to suggest proposals for improving airport competitiveness. In this respect, the entire international air routes in northeast Asia airport collected data of 4-10 March 2019 and 9-15 March 2020 through schedules analyzer database of OAG. We found that both the density and centrality have decreased since the spread of COVID-19. The government and airport authorities need active support such as a reduction of various fees and a moratorium on transportation rights to overcome the crisis in the air transport industry. When the COVID-19 situation calms down in the future, we hope that further research will be conducted to identify the structural changes in the SNA aspects through the vast data establishment in countries such as the EU and America.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.242-246
• /
• 2001

The alternated forward multi resonant converter (AT forward MRC) is studied on the transient response and the measured loop gain for stability. The compensator is composed of the error amplifier with 3 poles and 2 zeros. This is optimized through the experiment with HP4194A network analyzer. We are initiated by the thinking of how to make the stabilization from the experimental results of loop gain curves. The loop gain, low frequency gain and gain margin are more improved through the experimental considerations. Also, the transient response is more enhanced effectively.

• Journal of electromagnetic engineering and science
• /
• v.3 no.1
• /
• pp.67-71
• /
• 2003

In this paper, frequency modulated(FM) reflectometry is proposed to measure group velocity of microwave transmission line Various microwave transmission lines such as periodically loaded conducting posts in a waveguide and nonradiative dielectric(NRD) guide are adopted to measure their group velocity The result compared with that from network analyzer shows good agreement, indicating the validity of our measurement method.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.238-242
• /
• 2000

In this paper, the method for dielectric constant and less tangent measurements of microwave substrates using a microstrip line is presented. The two samples of an open-ended line and a short-ended tine are made and complex propagation constant is evaluated from the one-port scattering parameter measurements. This method has been automated fully using a personal computer and a vector network analyzer.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.99-103
• /
• 2000

본 논문에서는 FM Reflectometry를 이용하여 마이크로파 대역에서 다양한 전송선로의 분산특성을 측정하였다. 실험에 사용된 전송선로는 도파관에 금속봉이 주기적으로 위치한 구조로서 Gyro-TWT의 iinteractio circuit으로 사용되기 위해서 설계되었다. 도파관에 금속봉이 주기적으로 위치한 구조의 group velocity를 측정하기 위해서 FM Reflectometry와 기존의 Network Analyzer Time Domain 기능이 사용되어졌으며, phase velocity를 측정하기위해 서 short metal plate를 이용한 방법과 High Frequency Structure Simulator (HFSS)가 이용되었다 측정된 결과는 이론치, 시뮬레이션과 비교했으며 각각의 비교는 잘 일치함을 보여 FM Reflectometry기법이 분산특성 측정에 사용되어질 수 있음을 보였다.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.413-416
• /
• 2001

In high frequency range, RF circuit design without considering shielding effect can cause several significant changes due to increase in parasitic capacitance and inductance between RF signal lines and shielding box. In this paper, bandpass filter has been made to measure the shielding effect and its s-parameter has been measured by Vector Network Analyzer (VNA). Equivalent circuit model including the shielding effect has been constructed with the lumped elements extracted from the 3D electromagnetic simulator, Maxwell SI. Then, the validity of the model is verified using microwave circuit simulator, ADS (Advanced Design System).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.247-250
• /
• 2002

SAW filters were fabricated on $LiNbO_3$ substrates to evaluate frequency response and properties of photolithography. In the both of etch and lift-off methods, lift off method was superior to etch method in fabrication process. Frequency response property was measured by network analyzer. From measurement of acoustic property, SAW propagation velocity was 3574.9m/sec for $LiNbO_3$ SAW filter.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.5
• /
• pp.40-44
• /
• 1997

This paper presents the results of studies made for measuring the relative complex permittivity of PCB sheet material in he frequency a range of 100MHz∼1GHz using vector network analyzer. A measurement cell was developed for this purpose using broad-band impedance method and the dielectric constant and loss tangent of two PCBV sheet materials, glass-epoxy and teflon, were measured. The effect of copper cladding was studied.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.10
• /
• pp.59-68
• /
• 1993

This paper describes implemation of 'General-purpose ETRI MAP interface module' (GEM) for Mini-MAP network. GEM operates as a Mini-MAP node in our FA system. To communicate between GEM and programmable devices(PD) such as PLC and CNC, serial communication is used. Application programs of a MiNi-MAP host system control and monitor programmable devices via GEM. GEM is implemented and tested on the basis of the MAP 3.0. TBC in the Nini-MAP board performs the function of the MAC sublayer. The LLC sublayer is implemented according to the specification of Class 3 that includes Type 1 and 3. And the MMS services are designed within the scope of implementation class MAP3. All the softwares are implemented under the real-time multitask OS for real-time application of the Mini-MAP and they are loaded into PROMs at the network board of GEM. We tested the LLC functions to make use of a protocol analyzer for the token-passing protocol. Also the MMS conformance test was carried out by exchanging primitives between GEM and a MMS product that had already passed the conformance test. Therefore GEM is proposed as a network tool of Computer Integrated Manufacturing (CIM) to integrate PDs which don't support MAP functions.

• Journal of Korean Academy of Nursing
• /
• v.41 no.5
• /
• pp.623-632
• /
• 2011

Purpose: This study was done to explore the knowledge structure of Korean Nursing Science. Methods: The main variables were key words from the research papers that were presented in the Journal of Korean Academy of Nursing and journals of the seven branches of the Korean Academy of Nursing. English titles and abstracts of the papers (n=5,936) published from 1995 through 2009 were included. Noun phrases were extracted from the corpora using an in-house program (BiKE Text Analyzer), and their co-occurrence networks were generated via a cosine similarity measure, and then the networks were analyzed and visualized using Pajek, a Social Network Analysis program. Results: With the hub and authority measures, the most important research topics in Korean Nursing Science were identified. Newly emerging topics by three-year period units were observed as research trends. Conclusion: This study provides a systematic overview on the knowledge structure of Korean Nursing Science. The Social Network Analysis for this study will be useful for identifying the knowledge structure in Nursing Science.