• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.2
• /
• pp.130-132
• /
• 2001

The mechanisms of pretilt angle generation in nematic liquid crystal (NLC) with negative dielectric anisotropy on a rubbed polyimide (PI) surface for homeotropic alignment were studied. The pretilt angle of negative type NLC was smaller than that of the positive type NLC for all rubbing strength regions on the rubbed PI surface. The pretilt angle generated in NLC does not attributable to steric interaction between the fluorine moiety of NLC and the polymer surface on the rubbed PI surface. Consequently, the mechanism of the pretilt angle generation for homeotropic alignment is different from the one for homogeneous alignment.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.6
• /
• pp.301-304
• /
• 2006

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of the SiC (Silicon Carbide) thin film. The SiC thin film exhibits good chemical and thermal stability. The good thermal and chemical stability make SiC an attractive candidate for electronic applications. A vertical alignment of nematic liquid crystal by atomic beam exposure on the SiC thin film surface was achieved. The about $87^{\circ}$ of stable pretilt angle was achieved at the range from $30^{\circ}\;to\;45^{\circ}$ of incident angle. Consequently, the vertical alignment effect of liquid crystal electro-optical characteristic by the atomic beam alignment method on the SiC thin film layer can be achieved.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.526-529
• /
• 2004

The nematic liquid crysta](NLC) aligning capabilities using a-C:H thin film deposited at the three kinds of rf bias condition were investigated. A high pretilt angle of NLC on low substrate rf bias applied a-C:H thin films was observed and the low pretilt angle of the NLC on high substrate rf bias applied a-C:H thin films was observed. Consequently, the high NLC pretilt angle and the good aligning capabilities of LC alignment by the IB alignment method on the a-C:H thin film deposited at 1 W rf bias condition can be achieved. It is considered that pretilt angle of the NLC may be attributed to substrate rf bias condition and IB energy time. Therefore, LC alignment is affected by topographical structure forming strong IB energy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.337-340
• /
• 2001

The control of high pretilt angle far nematic liquid crystal (NLC) with negative dielectric anisotropy on the rubbed blending polyimide (homeotropic and homogeneous alignment) surface were studied. High NLC pretilt angle generated on the blending polyimide (homeotropic polyimide and SE-7492 surface was measured and the NLC pretilt angle increases with blending ratio and rubbing strength. However, the NLC pretilt angle generated on the blending polyimide (homeotropic polyimide and SE-150 surface was not varied. The high pretilt angle the NLC using blending polyimide surface can be acheived.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.337-340
• /
• 2001

The control of high pretilt angle for nematic liquid crystal (NLC) with negative dielectric anisotropy on the rubbed blending polyimide (homeotropic and homogeneous alignment) surface were studied. High NLC pretilt angle generated on the blending polyimide (homeotropic polyimide and SE-7492 surface was measured and the NLC pretilt angle increases with blending ratio and rubbing strength. However, the NLC pretilt angle generated on the blending polyimide (homeotropic polyimide and SE-150 surface was not varied. The high pretilt angle the NLC using blending polyimide surface can be achieved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.951-954
• /
• 2001

We investigated the aligning capabilities for nematic liquid crystal (NLC) using a in-situ photodimerization method on various photopolymer surfaces. High Pretilt angle of the NLC can be measured by obliquely polarized UV exposure of 30$^{\circ}$on a photo-crosslinkable polyimide (PI) based polymer surface for 3 min. The pretilt angle of the NLC generated on the photopolymer surface using the in-situ photodimerization method was higher than that of a blending photopolymers (PI and cinnamate materials).

• Electrical & Electronic Materials
• /
• v.10 no.9
• /
• pp.876-880
• /
• 1997

In this paper we investigated the transcription of liquid crystal (LC) alignment method by using memory effect of nematic(N) LCon polymide(PI) surface with side chain as for non-rubbing alignment techniques. That the monodomain alignment of aligned NLC is observed by microscope textures in the cells on PI surface with side chain. We obtained that the pretilt angle of NLC are generated about 3.7$^{\circ}$on PI surface. We suggest that the LC alignment by using transcription alingnment method is attributed to memory effect of NLC on PI surface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.4
• /
• pp.336-340
• /
• 2001

We have investigated the generation of pretilt angle and alignment stability for a nematic liquid crystal (NLC) with obliquely polarized UV exposure on the three kinds of photo-polymer. High pretilt angle of the NLC was obtained by polarized UV exposure on a PM4Ch surface for 1 min. But, the low pretilt angle of he NLC on a PVCi surface was observed. The pretilt angle generated is attributed ot the photosensitivity by the long side chaining of photo-polymer. Also, a good thermal stability of the three kinds of photo-polymer were obtained by thermogravimetric analysis (TGA) measurement until 300$^{\circ}C$. Finally, the good LC aligning capabilities using the photodimerization method were observed by annealing-treatment until 150$^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.507-510
• /
• 2000

Alignment effects for nematic liquid crystal (NLC) using an in-situ photo-alignment method with obliquely polarized UV exposure on a polyirnide (PI) surface for homeotropic alignment were studied. The high pretilt angle in NLC can be measured by obliquely W exposure of $30^{\circ}$ on the PI surface for 10~20 min. The pretilt angle of NLC generated using the in-situ photo-alignment was higher than that of a conventional photo-alignment method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.181-184
• /
• 2005

In this paper, we have improved a novel fast response time liquid crystal operating mode using tilt angle in the unique condition by hot-plate equipment. The new control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by Hot-plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. Especially, the low LC tilt angle of positive type NLC (${\Delta}n$>0) on the rubbed homeotropic PI surface by increasing temperature and time was measured. The EO characteristics of the high tilted OCB(HTOCB) mode using control of tilt angle on the homeotropic surface than that of conventional OCB cell can be improved. We suggest that the developed the HTOCB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of a fast response time and a high contrast ratio.