• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.53-59
• /
• 2010

The Developing & Producing of Eco-Friendly vehicle have been more incremented, as People appreciate the importance of Earth Environment Conservation. The needs of Neighborhood Electric Vehicle(NEV) that suits Current people's short drive distance is incremented. In this Paper, we define Neighborhood Electric Vehicle through out National Highway Traffic Safety Administration of United States of America's regulation and explain motor and battery of primary constituents of that. We used MATLAB and ADVISOR 200 programs for Simulation, and propsed NEV's Model that tow people can be got in. In this Model, the battery is Lead-acid battery(72V, 85Ah) and the motor is 8kW permanent magnet synchronous motor(PM motor). We compared change of driving range of NEV through out non-changing speed Driving(10km/h, 20km/h, 30km/h, 40km/h) and Manhattan driving schedule.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1499-1504
• /
• 2013

As oil price and demand for environment friendly vehicle rapidly increase, research on electric car is being widely carried out. Especially, NEV(Neighborhood Electric Vehicle) is a pollution-free vehicle that can be mass-produced which the time of development for related technologies is urgently needed. In this paper the On-Board charger for mid- and large- sized secondary cell is applicable in aerospace and other general industries, and the Off-Board standing charger is expected to be employed in creating charging infrastructure.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.55-63
• /
• 2018

In recent years, with the growing interest in electric vehicles, the development of a Neighborhood Electronic Vehicle (NEV) made for urban driving is accelerating. Existing NEVs are set to ~0.3 - 0.35 with more emphasis on performance rather than minimizing air resistance. In this paper, a NEV with a streamlined car body is proposed. The shape of dolphins and sharks was applied to the car body to minimize the air resistance generated when driving. Also, the performance of the vehicle was estimated by calculating the traction force and the roll couple, etc. To check the drag coefficient of the car body, finite element analysis software (COMSOL Multiphysics) was used. The frame of the vehicle is divided into the forward and the rear parts. Carbon pipe is used for the frame by MIG welding. The car body of the vehicle was fabricated by forming carbon fiber. This study confirmed the general possibility of using NEVs through driving experiments.

• KIPE Magazine
• /
• v.16 no.2
• /
• pp.38-43
• /
• 2011

전기자동차는 2차전지가 발달함으로 가능해지는 차량의 흐름인데 또한 높은 배터리 가격 때문에 딜레마에 빠져 있다. 이런 틈새의 시장을 만들기 위하여 이동 목적에 따라 접근할 수 있는 차량이 근거리 전기자동차 (neighborhood electric vehicle, NEV)이다. 또한 운전 형태의 변화와 더블어 초기 순수전기자동차의 시장 진입을 위하여 전세계적으로 개발, 실증 및 보급을 활발히 추진하고 있다. 본 고에서는 개발중인 (주)지앤디윈텍의 NEV 개발 현황과 및 기술을 소개 하고자 한다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.77-82
• /
• 2012

To share the lanes with conventional vehicles, traffic operation strategy is needed for NEV (Neighborhood Electric Vehicle). Because NEV cannot accelerate sharply as fast as common car include gasoline, diesel and LPG cars, they may interrupt traffic conditions and make traffic delay. After green lights turn on, all vehicles run through the street including NEV, but NEV have a maximum speed which is 50km/h. It can be an obstacle for following vehicles and will make traffic delay of the intersection. In this reason, we need to organize traffic systems like queue jump with priority traffic signal. To analyze the necessity for NEV road operations, we simulate three scenarios in congested and non-congested conditions. First is that we examine the condition which is mixed NEV and cars on the road, the second one is that we set up lane only NEV can accepted in simulation and last one is making queue jump lane and providing priority signal for NEV. In conclusion, we can conclude that making lane only for NEV is effective to improve travel speed when rate of NEVs is over 20%. Also queue jump lane and priority signal cannot make good effect to intersection delay and average speed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.9
• /
• pp.18-25
• /
• 2012

Recently, the depletion of fossil fuel carbon dioxide emissions due to limitations in the internal combustion engine vehicles is rising concern about electric vehicle. Neighborhood Electric Vehicle(NEV) is maximum speed 60km/h and one day driving distances less than 80km. In this paper, Power Conversion Controller is proposed for Neighborhood Electric Vehicle. To verify the developed Power conversion Controller, Test performed integration test, max load, power density, efficiency. Confirmed that the vehicle can be applied.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.124-134
• /
• 2011

To make popular the NEV(Neighborhood Electric Vehicles) uses, it must be considered the supply of infrastructure and the political decision for NEV. However, the guidelines of infrastructure for NEV are not prepared. The guidelines of infrastructure for NEV should be performed in many research and case. The purpose of this study is to reveal the influence of NEV on the two-lane highway traffic flows by TWOPAS simulation model. The main items to check the influence are Average Travel speed, Percent Time Spent Following and Total Delay. The scenario were setup by traffic volume. And the NEV percentages are changed from 1% ~ 30%. The scenario 1 which traffic volume are 650veh/h and the scenario 4 which traffic volume are 2,600veh/h are less influenced by NEV, compare to scenario 2, scenario 3. Because the scenario 1 is more free to make passing other cars and Scenario 4 is fully saturated with existing traffic volumes. The urban two-lane highway which has much traffic volume and the rural two-lane highway which has little traffic volume has affinity for NEV than the other two-lane highway.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.5
• /
• pp.373-380
• /
• 2016

In this paper, a 50-kW high-efficiency modular fast charger for both electric vehicle (EV) and neighborhood electric vehicle (NEV) is proposed. The proposed fast charger consists of five 10-kW modules to achieve fault tolerance, ease of thermal management, and reduce component stress. Three-level topologies for both AC-DC and DC-DC converters are employed to use 600V MOSFET, resulting in ease of component selection and increase in switching frequency. The proposed three-level DC-DC converter with coupled inductor and its hybrid switching method can reduce the circulating current under wide output voltage range. A 50-kW prototype of the proposed fast charger was developed and tested to verify the validity of the proposed concept. Experimental results show that the proposed fast charger achieves a rated efficiency of 95.2% and a THD of less than 3%.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.135-140
• /
• 2011

The battery pack, a main component of NEV(Neighborhood Electric Vehicle), needs cooling system when it is charging or discharging to prevent the degradation of the battery charging efficiency. The purpose of this study is to analyse the effects of cooling methods, changing positions of inlet and outlet and changing area ratios of inlet and outlet. It has been observed that in the point of uniform cooling suction from the exit side is more efficient than blowing from the inlet. And there is a suitable inlet/outlet area ratio in maximizing the mass flow rate. The numerical analyse using a commercial code STAR-CCM+ version 4.02 were used for the study.

• Journal of computational fluids engineering
• /
• v.16 no.3
• /
• pp.82-87
• /
• 2011

The battery pack, a main component of NEV(Neighborhood Electric Vehicle), needs cooling system when it is charging or discharging to prevent the degradation of the battery charging efficiency. The purpose of this study is to analyse the effects of cooling methods, changing positions of inlet and outlet and changing area ratios of inlet and outlet. It has been observed that in the point of uniform cooling, suction from the exit side is more efficient than blowing from the inlet. And there is a suitable inlet/outlet area ratio in maximizing the mass flow rate. A commercial code, STAR-CCM+(ver. 4.02), was used for the numerical study.