• Journal of Dental Anesthesia and Pain Medicine
• /
• v.23 no.5
• /
• pp.281-285
• /
• 2023

Background: Dentists bend needles prior to certain injections; however, there are concerns regarding needle fracture, lumen occlusion, and sharps handling. A previous study found that a 30-gauge needle fractures after four to nine 90° bends. This fatigue life study evaluated how many 90° bends a 30-gauge dental needle will sustain before fracture when bent using a needle guide. Methods: Two operators at Element Materials Technology, an independent testing, inspection, and certification company tested 48 30-gauge needles. After applying the needle guide, the operators bent the needle to a 90° angle and expressed the anesthetic from the tip. The needle was then bent back to a 0° angle, and the functionality was tested again. This process was repeated until the anesthetic failed to pass through the end of the needle due to fracture or obstruction. Each operator tested 24 needles (12 needles from each lot), and the number of sustained bends before the needle fracture was recorded. Results: The average number of sustained bends before needle failure was 40.33 (95% confidence interval = 37.41-43.26), with a minimum of 20, median of 40, and a maximum of 54. In each trial, the lumen remained patent until the needle fractured. The difference between the operators was statistically significant (P < 0.001). No significant differences in performance between needle lots were observed (P = 0.504). Conclusion: Our results suggest that using a needle guide increases the number of sustained bends before needle fracture (P < 0.000001) than those reported in previous studies. Future studies should further evaluate the use of needle guides with other needle types across a variety of operators. Furthermore, additional opportunities lie in exploring workplace safety considerations and clinical applications of anesthetic delivery using a bent needle.

• Archives of Craniofacial Surgery
• /
• v.17 no.4
• /
• pp.198-201
• /
• 2016

Background: Zygomatic arch is a bony arch constituting the lateral midface, which consists of 25% of all midface fractures. There are a number of ways to evaluate the extent of zygomatic arch fracture. Some authors have reported successful treatment outcomes using ultrasound (U/S). To add to the previous methods, we have considered ways to accurately display the location of the fracture line while using U/S with 23 gauge needle marking. We introduce our method, which provided satisfactory results for reduction using a portable U/S, and it can evaluate the fracture line simultaneously when reduction of an isolated zygomatic arch fracture is necessary, and needle marking, which can easily point out the fracture line on U/S. Methods: We studied 21 patients with an isolated zygomatic arch fracture who underwent closed reduction using U/S and needle marking between 2013 and 2015. Results: We achieved satisfactory results in all our cases with respect to reduction by using the Dingman elevator after performing a temporal approach incision, while confirming relative positioning between needle marking and zygomatic fracture at the same time, after insertion of a 23 gauge needle in the skin above the zygomatic arch fracture line parallel to it. Conclusion: We treated 21 patients with an isolated zygomatic arch fracture using U/S and the needle marking method, which provided satisfactory results because the extent of reduction of the fracture could be evaluated in real-time during the operation and exposure to radiation was reduced.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.2
• /
• pp.139-153
• /
• 2021

Background: In anesthetic techniques, touching bones can cause needle bending. Theoretically, a needle should support such deflection without fracturing. However, it is possible that a needle may fracture depending on the quality and type of needle used. This study evaluated the physical, chemical, and micromorphological characteristics of long and short dental anesthetic needles, as well as the mechanical properties of flexural load and bending resistance when needles are subjected to different bending angles. Methods: Long and short needles (30G, Jets, Misawa, Selekto, Terumo, Unoject and 27G, Dencojet, Injex, Jets, Misawa, Procare, Setoject XL, Terumo) were evaluated. Scanning electron microscopy was used to evaluate the needle bevels and energy-dispersive X-ray spectroscopy was used for the chemical analysis of needle compositions. Flexural loading and bending strength assessments were performed using a universal testing machine by bending the needles (n = 5) to angles of 30°, 60°, or 90°, or until fracture occurred. Results: The Injex 27G, Jets 27G, and Septoject XL 27G needles were all less than 30 mm in length. There were small percentage variations in the chemical compositions of the needles. Superior smoothness was observed for the Unoject 30G needle, which exhibited the highest fracture resistance at 60°. The Jets 30G needle exhibited greater resistance to fractures at 90°. The Procare 27G needle exhibited the highest load resistance to bending, followed by the Septoject XL 27G needle, and both needles were tied for the lowest fracture resistance. No needle fractured when bent to 30° or at less than three bends to 60° or 90°. Conclusions: Greater needle resistance to bending increases the probability of early fracturing. Thinner and shorter needles are more resistant than longer and thicker needles. Performing a single bend does not result in any significant risk of fracture or obliterate the lumen, allowing for the continued passage of anesthetic liquid.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.3
• /
• pp.320-326
• /
• 2016

The fracture of a needle during local anesthesia in dental treatment is rare; however, when it occurs, the needle should be removed without damage to surrounding structures as soon as possible. A fractured needle fragment that is buried in soft tissue would be difficult to remove, and a careful surgical procedure under general anesthesia is recommended in such cases. Children who require dental treatment are often not capable of cooperative behavior, thus unexpected movements can increase the risk of needle fracture. Clinicians can reduce the incidence of needle fracture accidents with a few precautions. In the present case report, we report a case of needle fracture due to abrupt movement during inferior alveolar nerve block anesthesia in a young child, with the purpose of drawing attention to needle fracture incidents. This report describes the possible causes and prevention methods of local anesthetic needle fracture, and the localization methods and surgical procedure for needle fragment removal.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.17 no.3
• /
• pp.225-229
• /
• 2017

The inferior alveolar nerve block is the most common method of local anesthesia for intraoral surgery at the posterior mandibular region. However, unexpected complications may occur when administering the local anesthesia. One of these uncommon complications is the fracture of the needle. If the injection needle is broken during the surgery, it should be removed immediately. However, this is one of the most difficult procedures. In this report, we present two cases of needle fracture during the procedure, and its successful removal under general/local anesthesia administration.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.22 no.4
• /
• pp.315-321
• /
• 2022

Although rare, hypodermic needle fractures can occur in the maxillofacial region. In cases of fracture, urgent intervention is required to prevent further complications. We present the case of a 37-year-old female patient with a fractured needle in the left sublingual fossa during a lingual nerve block 6 months before referral. The fragment of a 30-gauge needle was located using cone-beam computed tomography and retrieved under local anesthesia with blunt dissection. The patient recovered uneventfully, except for predictable postoperative inflammatory complications, which resolved within 2 weeks. Precautions should be implemented to prevent needle fractures, which are usually preventable. However, if the retrieval is unsuccessful, the patient should be referred to a well-equipped surgical unit without delay.

• Journal of Korean Neurosurgical Society
• /
• v.39 no.1
• /
• pp.61-63
• /
• 2006

We report a unique case of a neonate with an epidural hematoma induced by vacuum extraction. The epidural hematoma, communicating with a cephalhematoma through a linear skull fracture, disappeared after ultrasound-guided needle aspiration. The patient quickly recovered and one month later computed tomography revealed a complete resolution of the epidural hematoma.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.39 no.5
• /
• pp.251-253
• /
• 2013

Inferior alveolar nerve block obtained maximum anesthetic effect using a small dose of local anesthetic agent, which also has low a complication incidence. Complications of an inferior alveolar nerve block include direct nerve damage, bleeding, trismus, temporary facial nerve palsy, and etc. Among them, the major iatrogenic complication is dental needle fracture. A fragment that disappears into the soft tissue would be hard to remove, giving rise to a legal problem. A 31-year-old woman was referred for the removal of a broken needle, following an inferior alveolar nerve block. Management involved the removal of the needle under local anesthesia with pre- and peri-operative computed tomography scans.

• Tribology and Lubricants
• /
• v.35 no.4
• /
• pp.237-243
• /
• 2019

Through this study, we investigate the effects of ultrasonic nanocrystal surface modification (UNSM) technology on the fatigue life of needle roller bearings. The fatigue life of untreated and UNSM-treated needle roller bearings is evaluated using a roller fatigue tester at various contact stress levels under oil-lubricated conditions. We can ascertain that the fatigue life of an UNSM-treated needle roller bearing was extended by approximately 34.3% in comparison with an untreated one, where the effectiveness of UNSM technology diminishes with increasing contact stress. The surface roughness and surface hardness of needle roller bearings before and after being treated by UNSM technology are compared and discussed to understand the role of UNSM technology in improving the fatigue life of needle roller bearings. In addition, a fractograph of the damaged bearings is observed using a scanning electron microscopy to shed light on the fracture mechanisms of bearings under different contact stress levels. We can therefore conclude that the application of UNSM technology to the needle roller bearings improves the fatigue life by reducing the friction coefficient and increasing the wear resistance; this may be attributed to a reduction in surface roughness from 0.5 to $0.149{\mu}m$ and an increase in surface hardness from 58 to 62 HRc.

• The Korean Journal of Pain
• /
• v.13 no.2
• /
• pp.237-241
• /
• 2000

Vertebral compression fractures commonly afflict the elderly. Some patients suffer from severe mechanical pain in spite of treatments with strong analgesics and bracing. Vertebroplasty, which was originally used for vertebral hemangioma, is effective for patients who do not respond to these more conservative treatments. However, the procedure has some risk. Leaks of bone cement into perineural tissues can be a serious complication. In contrast to the lumbar vertebrae, the outer margin of the pedicle of the thoracic vertebrae is almost in line with the outer margin of the body. This, combined with the thinner pedicle of the thoracic vertebrae, makes proper needle placement difficult. The posterolateral approach is preferred to the transpedicular approach in order to avoid the danger of destroying the inner cortex of the pedicle. But there can be a problems with the standard posterolateral approach. The rib can be broken, the pleura can be punctured. A new and safer approach is possible. Before penetrating the bone, the needle is positioned at the upper margin of the transverse process, 5 mm away from the pedicle. To achieve this positioning, the needle must puncture the skin 1~1.5 cm laterally and 3~5 mm cranially to the target point on the bone. This approach was used for 10 patients and we achieved good results with no serious complication.