• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.2 s.38
• /
• pp.189-198
• /
• 1991

The object of this study is to perceive the discomforts of the brassiere consumers according to their age groups & weight groups. The study procedures consisted of a status quo study, a rating on fit and performance according to brassiere types. 1. The result of the status quo study are as follows. (1) The study showed that with getting age bust circumference and bust size become larger with a bigger tendency to droop. Thus older age, bigger bust circumference and size require a technically improved version of brassieres. (2) Slightly tight fit brassieres were favored over more ample ones. The hobbling areas were center front, under armpits, and shoulder strapareas in that order. 2. The results of fit rating on different brassiere types are as follows. (1) The areas affected by brassiere performance were length from side neck point to bust point (bust length), width between bust points and bust height. (2) Compared among brassiere types, the wire type proved most effective. The bigger cup size group had higher satisfactory rate and low discomfort on wearing.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.1
• /
• pp.91-102
• /
• 2018

The purpose of this study is to develop an excellent bodice prototype that is adapted to the body shape of middle-aged women using 3D measurement data. In the evaluation of appearance, S pattern 4.00, B pattern 2.80, E pattern 2.40, L pattern 1.40 were shown in order, and the best fit of S pattern was evaluated as excellent. As a result of looking at the color distribution chart to find out the amount, E pattern and S pattern were not space in the front bust, armhole, and the back waist line. The B pattern and the L pattern were marked in blue because of insufficiency space in the back neck. As a result of evaluation the amount of air gap in the clothing, the air gap of the bust was 0.12, which is the largest pattern of B. Next, the L pattern appears as a tight circle with smallest air gap in the order of the S pattern 0.096, the E pattern 0.08, and the L pattern 0.003. The S pattern was evaluated to be the most appropriate for the body shape of middle-aged women. But the waist and back were slightly tight. Middle-aged women have larger shoulder-related items and larger waist circumference. Therefore, when you set the perimeter item, you should add 1-2cm of space amount and give extra space to the circumference area.

• Textile Coloration and Finishing
• /
• v.35 no.2
• /
• pp.107-120
• /
• 2023

The purpose of this study was to analyze the patterns of D level protective clothing, improve their ease of movement by modifying the patterns, and validate the effectiveness of the improvements through 3D virtual fitting and subjective wearing evaluations. Based on previous studies that identified numerous complaints, the patterns of the neck, armpit, and waist areas were modified, resulting in the development of new patterns. To compare and analyze the improved protective clothing with the basic protective clothing, stress and strain were examined after 3D virtual fitting. Additionally, to assess the clothing's allowance, the overall distance between the avatar and the protective clothing, as well as the sectional circumference length and distance of each avatar body part, were measured. Furthermore, the improved protective clothing was manufactured, and a subjective wearing evaluation was conducted with ten males in their twenties as participants. The results showed that the improved protective clothing had evenly distributed stress, larger sectional circumference, and lower average cavity distance. The subjective wearing evaluation also revealed that the suit with improved patterns exhibited superior size suitability, reduced pulling sensation in different body parts, and increased ease of movement. In conclusion, this study confirmed that even minimal pattern modifications can enhance the functionality of protective clothing, alleviating discomfort for wearers.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.1
• /
• pp.99-109
• /
• 2008

The purpose of this study was to survey sizing system and preferable ease and to decide the body measuring items for pattern making in a men's dress shirt for mass customization industry that is rising to the surface as a new production system. For this, it had a survey subjects were 254 males between 25 to 44 years old who wear dress shirt frequently and the relevant on line companies, and analyzed the garment sizing system and preferable ease. Collected data were analysed by frequency analysis, t-test, $X^2-test$, and ANOVA using SPSS 12.0 for window. Garment pattern making should reflect the sizes of the body parts well, and simplification of the ordering process would work as an important variable. In relation to the preferable ease, older people preferred more ease while younger people preferred fit ease. In relation to the sizes, people wearing the size of '110' preferred more ease than the size of '90'. And people weighing over 90kg preferred sufficient ease than less weighing. People height over 170cm people preferred sufficient ease for the length between shoulders than height under 170cm. In case of the companies had no consistent sizing system. Significant difference was found in the sizes, except for the size of '100', among those companies, there was significant difference in the length between shoulders and the length of the shirt among those companies and those sizes. Significant body parts for a garment pattern making was height, the circumference of the neck, the chest circumference, the length between biacromion, the arms length, and the waist circumference.

• Korean Journal of Community Nutrition
• /
• v.3 no.5
• /
• pp.715-721
• /
• 1998

This study was performed to investigate how milk supplementation can benefit the elderly by increasing bone density but possibly harming the iron status concomitantly. Forty one elderly subjects over 65 years of age(male : 9, female : 32) participated. All subjects were apparently healthy, home staying and attending meal service for lunch at the welfare center. They were from low income area of Puchon city. One cup of milk per day was served for 10 months. The mean intake of calcium was significantly increased for females after milk supplementation. Males showed significantly increased means of triceps skinfold thickness, suprailiac skinfold thickness and waist circumference. Females showed significantly increased measurements fo three kinds of skinfold thickness, waist circumference, and hip circumference. There were no significant change in the mean bone density of lumbar spine$(L_2~L_4)$, femoral neck, ward's triangle and torchanter, but the proportion of osteopenia estimated by the T score of lumbar spine bone density was lowered from 50.0% to 34.6% for females. The mean Hb level was significantly for males. The proportion of anemia estimated by Hb(<12g/dl), Hct(<36%) and serum ferritin(<15mg/ml) were increased from 17.2% to 51.7%, from 20.7% to 44.8% and from 10.3% to 17.2%, respectively for females. It looks like milk supplementation can effect the intakes of several nutrients considered to be commonly deficient in the Korean diet fo elderly people, increase some anthropometric measurements, and decrease the proportion of osteopenia. However it can have adverse effects on iron status of females.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.2
• /
• pp.433-437
• /
• 2009

The purpose of this study was to measure circumference of four body parts of each Sasang groups with Bioelectrical Impedance Analysis (BIA), and evaluate its usefulness for Sasang type diagnostic test. We obtained the circumference measures of neck (CN), chest (CC), waist (CW), and hip (CH) of 91 college students using BIA and standardized by sex and age. The validity of Sasang group prediction with CC was evaluated. The Tae-Eum group (104.87${\pm}$5.19, 108.47${\pm}$4.96, 116.00${\pm}$9.39, 110.4${\pm}$5.29. neck, chest, waist and hip, respectively) has significantly (p<0.001) bigger circumferences than So-Yang (97.79${\pm}$3.82, 100.02${\pm}$4.21, 101.02${\pm}$7.88, 101.95${\pm}$4.06) and So-Eum (95.63${\pm}$4.67, 96.93${\pm}$4.80, 97.63${\pm}$7.72, 99.86${\pm}$4.40) groups at very four measures. Discriminant functions with CC can be used for Tae-Eum Sasang type diagnostic test with 91.2% of overall Percentage Correctly Predicted (PCP). Tae-Eum type-specific sensitivity was 73.3% and Tae-Eum type-specific specificity was 94.7%. The strength and weakness of measurement and standardization methods for Sasang type diagnostic test, and the methods for the standardization of physical traits with sex and age were discussed. Our study showed distinctive physical features of Tae-Eum type and the usefulness of BIA for the Sasang type diagnosis.

• Journal of Fashion Business
• /
• v.16 no.1
• /
• pp.150-159
• /
• 2012

This study intend to analyze differences between 3D body scanning sizes and direct measurement sizes of same subjects. The subjects of study are female students of university in China. 3D data analyze as a 3D Body Measurement Soft System. The conclusion found is as below: In case of circumferences, error between direct-measurement size and 3D body scanning size is from 4.9mm to 62.2mm. The neck circumference size of directmeasurement is bigger than 3D body scanning size. The height error range is from 0.6mm to 51mm. Height of underbust, waist and hip are that direct-measurement sizes are higher than 3D body scanning sizes. Gap of width is from 3.8mm to 21.9mm. The gap range is too narrow relatively to others. Only direct-measurement size of neck width is wider than 3D body scanning size. Error range of length is from 0.3mm to 41.8mm. 3D body scanning sizes of lateral neck to waistline, upperarm length, arm length, neck shoulder point to breast point, shoulder center point to breast point, lateral shoulder to breast point are longer than direct-measurement sizes. They have a negative margin of error. I intend to set up same measurement point between direct-measurement and 3D body scanning but they have some errors because direct-measurement point is applied by a person. 3D body scanning measurement point is settled by automatic system. A measurement point of direct-measurement and 3D body scanning isn't unite. So we need to make a standard of setting up measurement points.

• Journal of the Korean Home Economics Association
• /
• v.34 no.3
• /
• pp.219-232
• /
• 1996

This study is intended to find changing of upper body shape according to the increase of age of elderly women, to extract the factors which form the upper body shapes and to classify the upper body shapes and grasp the characteristics of each body type. The subject were 225 elderly women aged 55-79 years old. Data were analyzed by the multivariate method, especially factor and cluster analysis. The results are as follows: 1. The items of stature, weight and width and circumference of upper body decreased according to the increase of age. And, in the length items except the side neck point - the nipple point length decreased significantly. There were significant difference of upper body shape between age groups according to each group. 2. The shape of elderly women's upper body is determined the main 6 factors(the obesity of upper body, the shape of shoulder, the length of back side of upper body, the length of front side of upper body and the size of vertical direction between stature and arm and front neck width). 3. Elderly women have 4 types of upper body shapes, which are distributed evenly. The body type of Elderly woman changes from long and fat type to small and slim, type according to the increase of age.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.58.1-58.8
• /
• 2019

Background: The aim of this study is to investigate the relationship between gender-specific and obesity-related airway anatomy in patients with obstructive sleep apnea (OSA) by using cephalometric analyses. Methods: We retrospectively evaluated 206 patients with suspected OSA undergoing polysomnography and anthropometric measurements such as body mass index, neck circumference, and waist-hip ratio. We checked lateral cephalometry to measure tissue landmarks including angle from A point to nasion to B point (ANB), soft palate length (SPL), soft palate thickness (SPT), retropalatal space (RPS), retrolingual space (RLS), and mandibular plane to hyoid (MPH). Results: Male with OSA showed significantly increased SPL (P = .006) compared with controls. SPL and MPH had significant correlation with apnea-hypopnea index (AHI) and central obesity. Female with OSA showed significantly increased ANB (P = .013) and SPT (P = .004) compared with controls. The receiver operating characteristic curves revealed that SPT in male and ANB and SPT in female were significant in model 1 (AHI ≥ 5) and model 2 (AHI ≥ 15). MPH was also significant for male in model 2. Conclusion: Male and female with OSA had distinct anatomic features of the upper airway and different interactions among soft palate, mandible, and hyoid bone.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.31
• /
• pp.155-161
• /
• 1994

This study presents a systematic and mere economical method to acquire 3-D anthropometric data by the use of Moire' interferometry, image processing and computer vision techniques. An experiment was performed to measure sixty-one anthropometric variables, such as height weight neck-base circumference, contained areas of various contours etc.., of thirty-six male subjects with wide range of ages (14 years to 43 years' old). Cluster analysis was performed with contour information, and somatotyping was performed to obtain four distinct types of body shape. The results were then compared with classifications obtained from traditional somatotyping methods which showed 71.88% consistency. This study developed a simple and inexpensive method for 3-D anthropometric data acquisition and suggests the quantification and interpretation scheme that will enable us to utilize the data for industrial applications.