• 디지털융복합연구
• /
• 제15권8호
• /
• pp.465-476
• /
• 2017

본 연구는 골드테라피가 목, 등, 어깨 부위 근막통증증후군에 미치는 영향을 스톤테라피와 비교 연구하여 임상에서 효율적인 간호 중재로서의 활용 가능성을 검증하고자 실시하였다. 수도권에 거주하는 여성 20명을 골드군(10명), 스톤군(10명)으로 나누어 2주간, 주 3회, 1회 40분 씩, 총 6회 관리를 실시하였다. 골드군과 스톤군 모두 관리후 목둘레, 좌 우 어깨 넓이, 좌 우 견갑골 하각 넓이, 전 후 어깨 두께, 허리둘레가 관리전과 비교하여 통계적으로 유의미한 감소를 보였고(p<0.001) 그 변화량 차이는 골드군이 스톤군에 비해 더 크게 나타났다. 골드군과 스톤군 모두 관리후 목 우측굴, 목 좌측굴, 목 굴곡, 목 신전 각도 변화에서 관리전에 비교하여 통계적으로 유의미하게 증가하였고(p<0.001) 그 변화량 차이는 골드군이 스톤군에 비해 더 크게 나타났다. 결론적으로 골드테라피가 목, 등, 어깨 부위 근막이완과 통증 완화에 효과적인 간호중재 방법임이 확인되어 비침습적인 안전한 방법으로 활용할 가치가 있다고 사료된다.

• 복식
• /
• 제50권5호
• /
• pp.117-130
• /
• 2000

The purpose of this thesis is to offer basic data for clothing design which is intended to apply appropriate shape and capacity to clothes. The following are the analyzed results of an investigation which was conducted to characterize the upper half of the female body of 193 women whose ages are 18 to 25, taking part in this investigation. According to the results of analyzing young women's bust, I came to find a large individual difference of the wide varying factor numbers at the items of the side feature, the body stance, and the dart quantity. For the analysis of the female's upper body, 11 factors are used. The are as follows: Factor 1. width of the bust Factor 2. height of the bust and length of the arm Factor 3. side thickness of the bust and the upside type Factor 4. length of the bust on the front Factor 5. length of the bust on the back Factor 6. salient ratio of the breast Factor 7. width of the neck. the armhole, and measurement of the droop Factor 8. length of the shoulder Factor 9. flat ratio of the bust Factor 10. inclination of the shoulder factor 11. form of the back The shape of young women's upper bodies can be divided into four groups. The character ization of each group are as follows : Group 1 . 28.5% of the women who take part in this investigation belong to Group 1 These women have the shortest body, with a longer length of the front than the back and more thickness on the front than the back. Group 2. 21.1% of the women who take part in this investigation belong to this group. They show a longer length of the back and more thickness of the back than the front. In addition, this group is bent forward. Group 3. This group is the mast common type, showing the shortest and thickest character. 37.8% of the women who take part in this investigation have this bust character Group 4. 12.4% of the women belong to Group 4. They possess the highest and fattest character, skewing smaller necks, armholes, and waists than the other groups. This group also shows the drooping shoulders.

• 한국가스학회지
• /
• 제13권4호
• /
• pp.27-32
• /
• 2009

본 본문에서는 헬멧의 정상부에 별도로 보강뼈대를 설치하지 않은 경우에 헬멧의 두께를 변수로 헬멧 구조물에 걸리는 응력과 변형거동 특성을 유한요소법으로 해석하였다. 헬멧은 현장 작업자의 안전성과 충격에너지 흡수력을 높일 수 있도록 제작해야 하고, 헬멧을 오랫동안 착용해도 불편함이 없어야 하며, 또한 머리와 목을 보호할 수 있어야 한다. FEM 해석결과에 의하면, 외부의 충격력이 헬멧의 꼭대기에 가해졌을 때 헬멧에 작용하는 최대응력과 최대변형은 하중이 작용하는 지점에서 발생하고, 최대응력은 헬멧모체 구조물의 초기파손을 일으키는 원인으로 작용하는 것으로 나타났다. 헬멧의 두께를 4mm에서 2mm로 줄이면, 충격에너지 흡수율은 급격하게 증가하지만 헬멧에 작용하는 최대응력은 열가소성 소재의 인장강도 54.3MPa을 많이 초과하므로 파손되었다할 수 있다. 따라서 헬멧의 강도안전을 확보하기 위해서는 헬멧의 정상부에 보강뼈대를 설치하는 것이 바람직하고, 헬멧모체 구조물의 두께를 보다 두껍게 설계할 필요가 있다.

• 소성∙가공
• /
• 제16권8호
• /
• pp.603-613
• /
• 2007

This paper is concerned with joining of thin metal sheets by single stroke clinching process. This method has been used in sheet metal work as it is a simple process and offers the possibility of joining similar-dissimilar thin sheet metals. Clinching generates a joint by overlapping metal sheets deforming plastically by punching and squeezing sequence. AA 5754 aluminum alloy of 0.5 mm thick sheets have been selected as a modal material and the process has been simulated under different process conditions and the results have been analyzed in terms of the quality of clinch joints which are influenced mainly by tool geometries. The rigid-plastic finite element method is applied to analyses in this paper. Analysis is focused mainly on investigation of deformation and material flow patterns influenced by major geometrical parameters such as die diameter, die depth, groove width, and groove corner radius, respectively. To evaluate the quality of clinch joints, four controlling or evaluation parameters have been chosen and they are bottom, neck thickness of bottom and top sheets, and undercut thickness, respectively. It has been concluded from the simulation results that the die geometries such as die depth and diameters are the most decisive process parameters influencing on the quality of clinch joints, and the bottom thickness is the most important evaluation parameter to determine if the quality of clinch joints satisfies the demand for industrial application.

• 대한지역사회영양학회지
• /
• 제3권5호
• /
• pp.715-721
• /
• 1998

This study was performed to investigate how milk supplementation can benefit the elderly by increasing bone density but possibly harming the iron status concomitantly. Forty one elderly subjects over 65 years of age(male : 9, female : 32) participated. All subjects were apparently healthy, home staying and attending meal service for lunch at the welfare center. They were from low income area of Puchon city. One cup of milk per day was served for 10 months. The mean intake of calcium was significantly increased for females after milk supplementation. Males showed significantly increased means of triceps skinfold thickness, suprailiac skinfold thickness and waist circumference. Females showed significantly increased measurements fo three kinds of skinfold thickness, waist circumference, and hip circumference. There were no significant change in the mean bone density of lumbar spine$(L_2~L_4)$, femoral neck, ward's triangle and torchanter, but the proportion of osteopenia estimated by the T score of lumbar spine bone density was lowered from 50.0% to 34.6% for females. The mean Hb level was significantly for males. The proportion of anemia estimated by Hb(<12g/dl), Hct(<36%) and serum ferritin(<15mg/ml) were increased from 17.2% to 51.7%, from 20.7% to 44.8% and from 10.3% to 17.2%, respectively for females. It looks like milk supplementation can effect the intakes of several nutrients considered to be commonly deficient in the Korean diet fo elderly people, increase some anthropometric measurements, and decrease the proportion of osteopenia. However it can have adverse effects on iron status of females.

• 한국가스학회지
• /
• 제17권5호
• /
• pp.37-41
• /
• 2013

본 연구에서는 안전모 쉘 구조물의 정상부에 돌출부를 설치한 경우와 설치하지 않은 경우에 대해, 안전모의 두께를 변수로 응력과 변위거동 안전성을 유한요소법으로 해석하였다. 안전모는 오랫동안 착용해도 안전성을 높여주고, 충격에너지를 흡수하여 착용상의 불편함을 줄여주며, 머리와 목 부분을 보호할 수 있어야 한다. 응력해석결과에 의하면, 4,540N의 충격력이 안전모의 정상부 표면에 가해졌을 때 기존의 안전모에서는 3.7mm, 수정된 새로운 안전모에서는 3.2mm의 두께를 확보해야 안전하다는 것을 보여주고 있다. 변형거동 해석에 기초한 FEM 해석결과에 의하면, 기존의 안전모에서는 3.2mm, 수정된 새로운 안전모에서는 2.0mm의 두께를 유지해야 안전한 것으로 나타났다. 따라서, 안전모를 안전하게 설계하기 위해서는 안전모의 정상부에 돌출 구조물을 설치하는 것이 좀 더 안전하다할 수 있다.

• 대한치과교정학회지
• /
• 제53권5호
• /
• pp.289-297
• /
• 2023

Objective: To analyze the microimplant (MI) displacement pattern on treatment with a maxillary skeletal expander (MSE) using cone-beam computed tomography (CBCT). Methods: Thirty-nine participants (12 males and 27 females; mean age, 18.2 ± 4.2 years) were treated successfully with the MSE II appliance. Their pre- and post-expansion CBCT data were superimposed. The pre- and post-expansion anterior and posterior inter-MI angles, neck and apical inter-MI distance, plate angle, palatal bone thickness at the MI positions, and suture opening at the MI positions were measured and compared. Results: The jackscrew plate was slightly bent in both anterior and posterior areas. There was no significant difference in the extent of suture opening between the anterior and posterior MIs (P > 0.05). The posterior MI to hemiplate line was greater than that anteriorly (P < 0.05). The apical distance between the posterior MIs was greater than that anteriorly (P < 0.05). The palatal thickness at the anterior MIs was significantly greater than that posteriorly (P > 0.01). Conclusions: In the coronal plane, the angulation between the anterior MIs in relation to the jackscrew plate was greater than that between the posterior MIs owing to the differential palatal bone thickness.

• 한국전문물리치료학회지
• /
• 제23권3호
• /
• pp.11-20
• /
• 2016

Background: A forward head posture (FHP) is one of the most common types of poor head posture in patients with neck disorder. A prolonged FHP might increase pressure on the posterior cranio-cervical structure and exhibit reduced performance on a cranio-cervical flexion test (CCFT). CCFT is included to activate deep cervical flexor muscles and inhibit excessive activation of superficial cervical flexor muscles. Therefore, the selective activation of deep cervical flexors is needed for effective exercise for FHP. Objects: The purpose of this study was to compare muscle thickness between longus colli (Lco) and sternocleidomastoid (SCM) using ultrasonography in subjects with FHP depending on head support. Methods: This was a cross-sectional, case-control research design study. The ultrasonographic images of Lco and SCM were taken in 17 subjects with FHP during the 5 phases of the CCFT with and without a head support. Towel was used for supporting head to make the neutral head position in supine. Changes in muscle thickness during the test were calculated to infer muscle activation. Data were analyzed using repeated measures of two-way analysis of variance with the significance level of .05. Results: When subjects performed the CCFT with head support, there was a significant difference in muscle thickness of Lco and SCM (p<.05). According to a post hoc paired t-test, change of thickness of Lco was greater at all phases, and change of thickness of SCM muscle was less at phase 4 and 5 in condition with head support (p<.01) compared to condition without head support (p<.01). Conclusion: The result of this study suggest that applying head support for neutral head position during CCFT could be a useful method for activating Lco muscle without excessive activation of SCM muscle.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제23권3호
• /
• pp.248-253
• /
• 2001

Main disadvantages of conventional pectorails major myocutaneous flap is bulkness of muscular pedicle. It makes difficult to use this flap in a case of supraomohyoid neck dissection. Pectoralis major myocutaneous island flap is a modification to overcome this shortcoming. And bilobular design of skin portion of this flap could be used for reconstruction of a through and through defect. We report a case of reconstruction of full-thickness defect of cheek with bilobular pectoralis major myocutaneous island flap and compare it with conventional pectoralis myocutaneous flap.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.752-760
• /
• 2000

Mechanical press joining has been used in sheet metal joining processes because of its simple process and possibility of joining dissimilar metals, such as steel and aluminum. The strength of mechanical press joining varies with joining conditions. The optimum joining conditions considering tensile-shear and peel-tension strength have to be established to assure the reliability in the joining strength. Therefore, optimization of joining conditions has been investigated for improving joining strength of sheet metal. It is possible to obtain optimum strength from improvement on the joining strength of peel-tension mechanical press joint under multiaxial stress states.