• 한국정보전자통신기술학회논문지
• /
• 제2권1호
• /
• pp.65-72
• /
• 2009

기지국 배열안테나의 근역장 프로빙을 통해 원역장 성능을 평가하기 위해 반사판을 갖는 다이폴 배열 안테나와 프로브 사이 높이에 따른 상호 간의 영향을 분석하였다. 기본 개념은 기지국 배열 안테나의 입력단들과 프로브의 입력 port P 에 대한 근역장에서의 상호 높이를 변화시키며 S 파라미터 측정값을 분석하여 상호결합 효과가 가장 적으면서 프로빙 효율이 높은 위치를 결정하는 것이다. 그리고 여기서 얻어진 높이는 기지국 배열안테나의 정밀한 원역장 성능을 구하기 위한 근역장 프로빙 시스템 설계에 적용 가능할 것이다.

• Structural Engineering and Mechanics
• /
• 제15권6호
• /
• pp.717-733
• /
• 2003

A time domain method is presented for soil-structure interaction analysis under seismic excitations. It is based on the finite element formulation incorporating infinite elements for the far field soil region. Equivalent earthquake input forces are calculated based on the free field responses along the interface between the near and far field soil regions utilizing the fixed exterior boundary method in the frequency domain. Then, the input forces are transformed into the time domain by using inverse Fourier transform. The dynamic stiffness matrices of the far field soil region formulated using the analytical frequency-dependent infinite elements in the frequency domain can be easily transformed into the corresponding matrices in the time domain. Hence, the response can be analytically computed in the time domain. A recursive procedure is proposed to compute the interaction forces along the interface and the responses of the soil-structure system in the time domain. Earthquake response analyses have been carried out on a multi-layered half-space and a tunnel embedded in a layered half-space with the assumption of the linearity of the near and far field soil region, and results are compared with those obtained by the conventional method in the frequency domain.

• 비파괴검사학회지
• /
• 제25권6호
• /
• pp.459-466
• /
• 2005

The scanning laser source (SLS) technique has been proposed recently as an effective way to investigate small surface-breaking defects, By monitoring the amplitude and frequency changes of the ultrasound generated as the SLS scans over a defect, the SLS technique has provided enhanced signal-to-noise performance compared to the traditional pitch-catch or pulse-echo ultrasonic methods, An extension of the SLS approach to map defects in microdevices is proposed by bringing both the generator and the receiver to the near-field scattering region of the defects, To facilitate near-field ultrasound measurement, silicon microcantilever probes are fabricated using microfabrication technique and their acoustical characteristics are investigated, Then, both the laser-generated ultrasonic source and the microcantilever probe are used to monitor near-field scattering by a surface-breaking defect.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.127-127
• /
• 2012

We carried out the high-resolution dielectric mapping of graphenes on $SiO_2$/Si substrate, using the scattering Apertureless Near-Field Scanning Optical Microscopy (s-ANSOM) in both visible (633 nm) and infrared (3.6 um) wavelengths. In the visible wavelength, the dielectric contrasts are almost proportional to the number of the graphene layers, which indicates that the near-field interaction between the tip and individual graphene layers leads to an image charge oscillation in two-dimension. In the infrared region, on the other hand, we observe unique layer-specific contrasts that do not linearly increase with number of layers. It is attributed to the layer-dependent band- structure of graphenes.

• 전자공학회논문지A
• /
• 제32A권2호
• /
• pp.19-30
• /
• 1995

Diffraction patterns of the copolarized and the crosspolarized total electric fields by a spherical air cavity in a dielectric medium are analyzed in the forward near-field region when the wavelength of the incident plane wave is comparable to one half of the cavity radius. It is shown that double nulls and dips of the copolarized and the crosspolarized total electric fields exist in the measurement plane tansverse to the propagating direction of the incident field, and their dependences on the frequency, the distance of the measurement plane, and the measurement angle are analyzed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.643-648
• /
• 2011

This paper deals with the ESM(equivalent source method) with the continuation of acoustic near-field for NAH(near-field acoustic holography) to overcome the finite measurement aperture effect and reconstruct the normal velocity on an arbitrarily shaped structure surface. The continuation method is an extension of the measured sound field into a region outside and is based on the Green's function relating acoustic quantities on the two conformal surfaces. This algorithm is not limited to planar surfaces and can be applied to arbitrarily shaped surfaces. The ESM is an alternative approach of BEM-based NAH for the reconstruction on a general structure. In ESM the acoustic field is represented by a set of point sources located over a surface that is close to the structure surface. The simulation results of this study shows that the reconstruction error of particle velocity on the source surface is 11% and 16% for planar and cylindrical sources separately.

• Journal of the Korean Physical Society
• /
• 제73권11호
• /
• pp.1698-1702
• /
• 2018

We simulate the light transmission through an extremely small nanoscale aperture having a 10 nm diameter punctured in a metal film positioned at the center of a plasmonic bull's eye grating. A considerable directive emission of transmitted light with a divergence angle of 5.7 degrees was observed at $10{\mu}m$ from the nanohole opening at the frequency of surface plasmon polariton excitation, an confirmed by measuring the distance dependent transmission amplitude. Observations of the electric field in cross-sectional, near-field, and far-field views near-field enhancement associated with the surface plasmon excitation, and the interference of the electric field light through the nanohole in the near-field region is responsible for such a considerable directive emission.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.105-110
• /
• 2006

Many previous works have been performed to provide correlations of flame length, theoretically and experimentally. Most of these results studied were conducted in vertical turbulent flame with no coaxial air condition. The present study analyzes the flame length scaling with coaxial air. In turbulent hydrogen non-premixed jet flames with coaxial air, flame length scaling theoretically proposed so far has been related with the concept of a far-field equivalent source. At high coaxial air to fuel velocity ratio, $U_A/U_F$, however, this scaling theory has some difference with experimental flame length data. This difference is understood to be due to the fact that the theory is based on far-field notion, while the effect of coaxial air on jet flame occurs in the region near the nozzle exit. Therefore, we define effective jet density $P_{eff}$ involving the concept of near-field so that effective jet diameter can be extended to the near-field region. In this condition, we modify the correlation and compare with experimental data.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.317-320
• /
• 2013

We studied the polarization state in an apertureless scanning near-field microscopy (a-SNOM) operating in reflection mode by using three-dimensional Finite-difference Time-domain (FDTD) method. As a result, the electric field around tip apex in the near-field region enhanced four times stronger than the incident light for ppolarization when the tip-sample separation was 10 nm. We find that the p- and s-polarization state is maintained for the scattered light when the probe is perpendicular to the sample. When the probe is not perpendicular to the sample, the polarization state of scattered light will rotate an angle that equals to the inclination angle of probe with p-polarization illumination. On the other hand, the polarization state will not rotate with s-polarization illumination.

• 한국전자파학회논문지
• /
• 제15권5호
• /
• pp.473-479
• /
• 2004

본 논문에서는 cellular 이동통신용 기지국 안테나와 같이 사용되는 파장에 비해 비교적 부피가 큰 해석 대상 체의 근거리장에서 전력 밀도를 계산한 내용을 다루었다. 현재 국내에서 cellular 이동통신 기지국용 안테나로 널리 사용되는 판넬형 섹터 안테나를 모델링하고 FDTD 계산법으로 reactive 근거리장의 전자계 분포를 계산하였으며 near to far 변환 통하여 원거리장의 안테나 이득을 구하였다. 그리고 radiating 근거리장의 전력밀도를 계산하기 위하여 원거리장의 이득을 이용하여 gain-based 모델을 적용하였다. 끝으로 radiating 근거리장의 전력밀도 계산 결과와 ICNIRP guideline의 전력밀도에 대한 일반인 및 직업인의 노출 제한 값을 고려하여 인증 거리(compliance distance)를 산출하였다. Gain based 모델을 이용한 계산 결과를 표면주사(surface scanning) 방식을 이용한 전력밀도의 측정 결과와 비교한 결과 주방사 방향의 중심 위치에서 계산된 값은 gain based model을 이용할 경우 -14.55 ㏈m이고, 측정된 값은 -15.75 ㏈m으로 케이블 및 커넥터의 손실을 감안하면 매우 정확한 것으로 나타났다.