• International Journal of Contents
• /
• v.6 no.2
• /
• pp.6-9
• /
• 2010

Using symplectic relation and reaction concept, we propose a planar near-field antenna measurement method. A generalized probe compensation equation is deduced to obtain the probe correction formulation. To verify our approach, a reflector antenna with $1{\times}2$ horn array is fabricated and measured in the near-field measurement facility. The near-field measurement results are compared with the physical optics (PO) simulation. The results of measurement and simulation agree very well near to the mainbeam.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.105-111
• /
• 2019

In this paper, a performance analysis of waveguide broad-wall slot array antenna for millimeter-wave seeker in Ka-band was performed as using near-field measurement. The measurement of slot array antenna was conducted in both far-field and near-field. And the validation of near-field test in millimeter band was confirmed. It was confirmed that the beam pattern characteristics including beam width and side lobe level of the slot array antenna that performed the verification were the same. Differenced in the side lobe level of azimuth and elevation beam pattern were verified to be less than 1dB. Additionally, the new antenna aperture distribution was extracted as using back-projection method modifying the near-field data and then introduced the method conducting performance analysis of array antenna.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.1
• /
• pp.65-72
• /
• 2009

For the evaluation of far-field performance by using the near-field probing on the base station dipole array antenna, the effects of mutual coupling depending on the heights between the array antenna with reflector and the probe were analyzed. When the height is varied in the near-field region, S parameters on the input ports of antenna and probe are measured and analyzed to decide the height for the minimum mutual coupling effect and the maximum probing efficiency. This height will be applicable to the near-field probing system design to achieve the precision far-field performance of a base station array antenna system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.23-30
• /
• 2012

In this paper, we propose a new near-field reader antenna for 900 MHz RFID. The proposed antenna consists the micro-strip antenna with the periodic structure. The overall dimension of the antenna is $313mm{\times}152mm{\times}14mm$. The antenna has the uniform E-field distribution in near field region and the heart-shaped radiation beam pattern (Peak gain=-2 dBi). The transmitted power range is from 17 dBm to 23 dBm. We focus on minimizing the detected error by suppressing the reflected power from the metal, which is attached to the surface by tag, and by reducing the transmitted power from tag.

• The Journal of the Korea Contents Association
• /
• v.6 no.2
• /
• pp.51-58
• /
• 2006

The enhancement of antenna near-field measurements is obtained using a general probe compensation equation based on the Lorentz reciprocity theorem and reciprocity notation. The probe compensation is an essential process of the near-field to far-field transformations. Applying the equation proposed in this paper to a planar scanning for a rectangular horn antenna shows that our near-field radiation pattern is similar to that of a far-field and our theory is very simple to use and suitable for most practical applications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.217-225
• /
• 2003

In this paper, in order to investigate the near field distribution characteristic of the Loop Antenna we simulated and measured the near field of a Loop Antenna using optical electric-field sensor in a large Chamber(8.5 m x 7 m x 7 m). The simulation methods were used MoM for frequency domain and FDTD for time domain. From the analysis results, it can be seen that the simulation and measurement results are very aggregated, and the optical electric-field sensor is a certificate of validity. In frequency domain, in case of the optical sensor with vertical polarization is located above the near vertical line of the Loop Antenna the signal strength level is more 15 ㏈ than with horizontal polarization. But in case of the optical sensor located above horizontal line of the Loop Antenna, signal strength level is not different. And, in the time domain, although input signal is positive, in the case of the optical sensor with vertical polarization is located above horizontal line of the Loop Antenna, it can be seen that the received pulse shape is negative.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1155-1164
• /
• 2011

In this paper, we proposed the transmit beam measurement method of active phased array antenna, which is installed in Korea's first developed naval medium range radar, using near-field measurement facility. The pulse-mode high power characteristics of active phased array antenna's trasmit-beam make it difficult to measure with general near-field measurement facilities where low power continuous RF signals are used. Thus, in this paper, the measurement method of active phased array antenna's transmit beam in conjunction with the near-field measurement facility, which is suitable for the high-power transmit beam measurement, and PNA-X network analyzer(Agilent Technologies), which can support pulse-mode measurement, was proposed and measured by near-field measurement techniques. And the EIRP(Effective Isotropic Radiated Power), the transmit characteristic of active phased array antenna, was measured by the near field measurement techniques and compared to numerical estimation which was nearly equal with small difference of 0.1 dB.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.267-270
• /
• 2000

The feasibility of small linear antenna for near range wireless communications was studied. The requirement of the system are frequency range 9∼12 MHz and antenna size 15 cm. The communication range is about 15 m. The antenna input impedance is very small radiation resistance and very large capacitive reactance. The lossless impedance matching is nearly impossible, therefore lossy matching is considered. The antenna has very low radiation efficiency. The near field calculation has a large uncertainty, but the results can be used as the guideline of a small linear antenna system for a near range wireless communication.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1064-1068
• /
• 2020

For LW-TLM antenna of 65 kHz, Near-field propagation characteristics due to wave propagation obstacle are analyzed in this paper. The simulation modeling for propagation effects are based on the model of actual LW-TLM antenna which utilizes the frequency of 65 kHz, and the model expressed as propagation obstacle at a mountain height and a proximity of antenna and mountain. The near-field performance are analyzed based on the parameters of simulation model. In case of a normal mountain height and distance between the adjacent mountain and antenna site, a field strength change of about 1.7 dB has occurred. Above the constant distance of propagation obstacle and antenna, the wave propagation characteristics of disregarding the effects of propagation obstacle are shown. The results of this paper can be used to design and build a transmitting antenna site with 65 kHz operating frequency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.2
• /
• pp.149-155
• /
• 2014

In this paper, we study the complex mobile antenna for WPT(Wireless Power Transfer) with NFC(Near Field Communication) of inductive coupling using FPCB which has half thickness compared with the existing coil type antennas. Considering the pattern thickness of loop antenna, the analysis of electromagnetic wave absorber and battery's influence, absorber thickness, the ranges of design parameters are obtained. The proposed antenna has 0.45 mm thickness using single layer 3 oz FPCB and absorber. From measurement, the characteristics of NFC antenna can be satisfied with the specifications of EMVCo. and domestic mobile telecommunication and the transmission efficiency of the proposed WPT antenna is 68.1 % which is competitive with the existing coil type antenna. From the results of this paper, it has been confirmed that the proposed antenna can be used as the WPT and NFC antenna for mobile phone. Key words: Wireless Power Transfer, Near Field Communication, Mobile Phone Antenna, Absorber, FPCB.