• Journal of the Korean Society of Safety
• /
• v.34 no.4
• /
• pp.68-75
• /
• 2019

As the tower crane accident emerged as a social issue in 2017, various government measures were prepared. Most of the measures are focused on erecting, climbing, and dismantling phases. Analyzes of 84 serious accidents related to tower cranes from 2000 to 2018 and 104 near misses accidents from 2016 to 2018 revealed that 50% of the serious accidents occurred during the operating phase. The main occupation influencing operating phase accidents was signalman(81.6% of serious accidents), whose communication and competency were governing causes. This result was the same in 294 questionnaires to signalmen. Signal systems and education policies for tower crane signalman in Korea and foreign countries were analyzed, and standardization of wireless signal system and improvement of education system were propose.

• Journal of Chest Surgery
• /
• v.54 no.1
• /
• pp.68-71
• /
• 2021

A 37-year-old man was transferred to our level I trauma center after a road traffic accident, presenting with right acetabular fracture, multiple rib fractures, epidural hemorrhage, and liver contusion. Severe traumatic tricuspid regurgitation was also discovered during the work-up for surgery. Our initial attempt at acetabular surgery failed when the patient experienced near cardiac arrest during anesthetic induction. It was hence decided that tricuspid valve repair should precede orthopedic surgery. Minimally invasive tricuspid valve repair using the double orifice technique was successfully performed. Subsequently, acetabular surgery was performed and he was discharged 35 days post-trauma without any complications.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.298-303
• /
• 2014

In this study, we examine the trends and types of incidents frequently occur during radiation therapy by using the data from the radiation oncology safety information system (ROSIS), according to discovery method explores the development direction of future research accident cause factor control method. This study was carried out analysis of incident data in ROSIS nearly 1163 cases in last 11 years from 2003 to 2013. We categorized into treatment methods, found the time, discoverer of occupations and finding ways to analyze the data. Then, we calculate the percentage and the classification for each item. About 1163 cases of incident cases including the near miss cases, external radiation therapy, brachytherapy and other were 97%, 2% and 1%. In the case was improperly planned dose delivery was 44% (497 cases) which 429 cases (86%) was found before 3 fractions and 13 cases were found after 11 fractions. The investigation was found to be distributed in various a found times. Approximately 42% of found time was during treatment and 29% of patients were found the problem during inspection chart. Occupation to discover the most radiation accidents was the radiation therapist (53%) who works in treatment room. Among 1163 incidence cases, 24% cases were found the accident before the treatment, therefore most of accident were found after of during the treatment (70%, 813 cases). This trend is acquired through ROSIS analysis, is expected to be not significantly different in the case of Korea, so it is necessary more diverse and systematic research for the prevention and early detection by using the ROSIS data.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.67-74
• /
• 2008

Even though the efficiency of a point based black spot improvement project has been low, none of solid methodology, which is based on section not point, and is considered as one of the promising substitute, has not been come up with yet. Thus, this research aims at proposing the adequate length of a hazardous section and a method to set segment length over which the project needs to be performed on rural highways by analyzing the distances from project-conducted sites to new black spots in the following year and distances between project needed but not conducted sites and new black spots in the following year. According to the analysis, the probability of being a new black spot near the project conducted intersection is higher than that of a non-conducted intersection within 2km, however, no strong relationships between project types and distance distribution have been found. Based on those findings, a method to determine the target segment including adjacent black spots within 2 kilometers-range was proposed.

• Journal of the Korean Institute of Gas
• /
• v.22 no.5
• /
• pp.31-37
• /
• 2018

The distrust about chemical plant safety have been increased by occurring the major industrial accidents. Chemical plants have become more and more enlarged and sophisticated to increase production amount and decrease cost. So hazard of industrial accidents also have been increased. In this situation, quantitative risk assessment is activated by introducing OCA(Off-site Consequence Analysis). So it is possible to analyze the objective hazard of chemical plant. Currently OCA focus on the end point of hazardous area by fire/explosion/dispersion. But in this case, it is possible to analyze the industrial accident effect to near the chemical plant but hard to consider the actual hazard by frequency and population density. This study analyzes the validity about application of F-N curve to OCA by compare end point with F-N curve about accident.

• Journal of Information Technology Services
• /
• v.8 no.2
• /
• pp.147-156
• /
• 2009

As the result of the rapid development of IT technology, an on-line diagnostic system using the field bus communication network coupled with a smart sensor module will be widely used at the nuclear power plant in the near future. The smart sensor system is very useful for the prompt understanding of abnormal state of the key equipments installed in the nuclear power plant. In this paper, it is assumed that a smart sensor system based on the fieldbus communication network for the surveillance and diagnostics of safety-critical equipments will be installed in the harsh-environment of the nuclear power plant. It means that the key components of fieldbus communication system including microprocessor, FPGA, and ASIC devices, are to be installed in the RPV (reactor pressure vessel) and the RCS (reactor coolant system) area, which is the area of a high dose-rate gamma irradiation fields. Gamma radiation constraints for the DBA (design basis accident) qualification of the RTD sensor installed in the harsh environment of nuclear power plant, are typically on the order of 4 kGy/h. In order to use a field bus communication network as an ad-hoc diagnostics sensor network in the vicinity of the RCS pump area of the nuclear power plant, the robust survivability of IT-based micro-electronic components in such intense gamma-radiation fields therefore should be verified. An intelligent CCD camera system, which are composed of advanced micro-electronics devices based on IT technology, have been gamma irradiated at the dose rate of about 4.2kGy/h during an hour UP to a total dose of 4kGy. The degradation performance of the gamma irradiated CCD camera system is explained.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.1
• /
• pp.12-20
• /
• 2014

The objective of this paper is to aid in basic directions for the countermeasure against marine accidents by using the statistical data of Jeju Coast Guard from 1983 to 2012. Marine accidents of about 600~1,000 vessels was reported in all the waters around South Korea from 2000 to 2008. From 2009, these accidents increased rapidly and reached 1,600~2,000 vessels. Although marine accidents of longline fishing vessels did not show a big change prior to 1993, the number have increased steadily until 2007. This is considered a tendency that appears when longline vessels, using the Port of Sungsanpo as a base and operating in fishing grounds in the East China Sea, are converted to long-term fishing from short-term fishing for reasons such as cost reduction due to the sudden rise of oil prices and the performance improvement of the fishing vessels. The number of vessels in marine accidents decreased gradually from 1999 to 2002 and for nearly 7 years from 2002 to 2008, the annual average of marine accidents stayed at 97 vessels. This is seemed to be the result of a change in the policy of either the central or local government and largely associated with changes in the way of statistical processing. This tendency is resulted in lower number of the accidents due to careless navigation which can be viewed as a human error than the number of marine accidents due to poor maintenance as a cause of mechanical failure in the same period. The increase rate in the marine accidents of Jeju Island-based fishing vessels is greater than that of other area-based fishing vessels among the fishing vessels operating in coastal and near sea around Jeju Island each year.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.124-132
• /
• 2012

There is high probability of children's traffic accidents. Because their physical, mental attribute are weak. Major part of the accidents happen during walking. Above all, jaywalking is the biggest traffic accident reason. Many traffic accidents take place on the road to school or near the home area. So Ministry of Public Administration and Security legislated children safeguard zone since 1995. But a study are inadequate the safety facilities on the effectiveness verification in the school zone. Therefore, this study aims to analyze the effectiveness of safety facilities. The vehicle speed is a direct correlation traffic accident. So in this study, the MOE(Measure of Effectiveness) is average travel speed in the school zone. The results shows that hump, rised pedestrian crossing has an effect.

• Convergence Security Journal
• /
• v.15 no.4
• /
• pp.121-126
• /
• 2015

Exposure of personal information that is held by hacking accident near the company has led to severe water level. And, it has changed security threat elements generated according to businessenterprise. Therefore, in this paper, I looked at security threat elements and proposed the way of appropriate information security consulting according type of company. First, In the financial and insurance industries, and should not have been compromised by a worm virus infection due to lack of awareness inside of members, by collectively apply in the same way the internal security standards of the organization to members, the risk of customer information. It shall be provided in advance that the security accident occurs due to a higher job group. Therefore, information security consulting method based on people and information is applied. Secondly, in industry of company, to perform consulting information security based on the attributes of the case industry groups.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.41-46
• /
• 2011

The purpose of this paper is to analyze the causes of accidents related to the 3 phase 170 kV gas insulated switchgear of a power system collected from accident sites to secure data for the prevention of similar accidents and provide important points of view regarding diagnosis for the prevention of accidents involving gas insulated switchgears. The analysis results of the causes of accidents involving gas insulated switchgears showed deformation of the manipulation lever installed at the S-phase, disconnection of the insulation rod connection, melting of the upper conductor, a damaged tulip, damage to the lower spacer and the spacer at the breaker, etc. It is believed from this result that the potential for accidents has expanded due to accumulated energy as a result of repeated deterioration. The carbonization depth of a GIS was formed near the screw (T2, T3) used to secure the lower pole of the S-phase tulip. It is not known what has caused the screws to be extruded and melted. However, it is thought that an unbalanced electromagnetic force, micro-discharge, surface discharge, etc., have occurred at that point. In addition, even though 16 years have passed since its installation, there was no installation defect, act of arson, accidental fire, etc. General periodical inspection and diagnosis failed to find the factors causing the accidents. As a system contained in a closed metal container, it has a high risk factor. Therefore, it is necessary to design, install and operate a GIS in accordance with the standard operational procedure (SOP). In addition, it is necessary to apply conversion technology for periodical SF6 gas analysis and precision safety diagnosis. It is expected that tracking and managing these changes in characteristics by recording the results on the history card will provide a significant accident prevention effect.