• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.45.2-45.2
• /
• 2015

It is obvious that there are plentiful of dust particles in the interplanetary spaces of the Solar System (IDPs), based on micrometeor craters, zodiacal light and direct measurements on the spacecraft. Because of photon drag and planetary perturbations, these particles are continuously falling to the Sun or planets, therefore continuous source of the IDPs are required. We studied the fractional contribution of each type of solar system objects to the IDPs complex through the optical properties of the potential dust sources and the zodiacal light. We found that more than 90% of the IDPs are originated from cometary nuclei. This result is discussed through the comparison with the dynamic simulation, micrometeors mineralogy and near-infrared spectrum of the zodiacal light. In addition, we introduce our new project on the numerical simulation for the dust particles ejected from the cometary nuclei, to verify the conclusion of dominant cometary contribution and its detailed consequences.

• International Journal of Costume and Fashion
• /
• v.12 no.1
• /
• pp.29-48
• /
• 2012

The purpose of this study was to examine the relationship between consumer spatial behavior and consumer characteristics based on trade area selection criteria 469 female consumers who lived in the two new towns near Seoul, Bundang and Ilsan, participated in the study by completing questionnaires. Data were analyzed by using cluster analysis, ANOVA, Duncan's multiple range test, chi-square analysis, etc. The findings of the empirical research were as follows: 1. Five groups were identified by cluster analysis based on trade area selection criteria of clothing price-oriented group, time convenience-oriented group, shopping convenience-oriented group, variety/entertainment-oriented group, and passive shopping group. 2. Each group differed in spatial behavior such as clothing shopping area, the visiting frequency, and spatial movement type. 3. Each group showed differences in fashion involvement and demographic characteristics(age, marital status, education, occupation and social status).

• Agricultural and Biosystems Engineering
• /
• v.1 no.1
• /
• pp.16-21
• /
• 2000

Measurement of spray deposit is necessary for evaluation of a chemical application technology. However it is not easy and time consuming. A simple method for measuring the deposition amount of spray using a tracer and a spectrophotometer was developed. Various materials were tested to determine an adequate tracer. Food dye was selected as a tracer, because it was cheep and easily treatable. Using NIRS(Near Infrared Reflection Spectrophotometer), a regression curves between maximum absorbance of a solution and concentration of the tracer were obtained. Yellow food dye solution showed a peak of spectrum at 452 nm, and absorbance of peak showed a tendency to increase as concentration increased. Green or pink food dye were tested and judged to be good tracers. However, tracer concentration should not exceed certain limits in order to measure maximum absorption. Using spraying liquid with known tracer concentration and known amount of washing liquid, spray deposit amount on real targets on leaves could be estimated at less than 13% error level.

• Journal of Biomedical Engineering Research
• /
• v.33 no.3
• /
• pp.114-127
• /
• 2012

Recent technical advancement allows noninvasive measurement of blood glucose. In this literature, we reviewed various noninvasive techniques for measuring glucose concentration. Optical or electrical methods have been investigated. Optical techniques include near-infrared spectroscopy, Raman spectroscopy, optical coherence technique, polarization, fluorescence, occlusion spectroscopy, and photoacoustic spectroscopy. Electrical methods include reverse iontophoresis, impedance spectroscopy, and electromagnetic sensing. Ultrasound, detection from breath, or fluid harvesting technique can be used to measure blood glucose level. Combination of various methods is also promising. Although there are many interesting and promising technologies and devices, there need further researches until a commercially available non-invasive glucometer is popular.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.668-671
• /
• 2006

Radiative transfer modeling of ice clouds is developed. Ice clouds located near tropopause reflect most of sunlight, thus atmospheric and surface effects can be minimized. Cloud properties such as cloud optical thickness (COT) and effective radius are important parameters to determine the magnitude of reflectance, while atmospheric and surface parameters rarely affect reflectance value. For selected homogeneous cloud pixels of MODerate Resolution Imaging Spectroradiometer (MODIS) observation, reflectances are calculated using MODIS cloud products as inputs of radiative transfer model (RTM). For three types of phase function (Henyey-Greenstein, Garcia-Siewert, Baum) calculated reflectances are compared with observations for validation. All cases show linear relationship between simulated values and measured values, however each represent different bias and slope. The result shows that phase function determine angular distribution of reflectance.

• Nuclear Engineering and Technology
• /
• v.30 no.1
• /
• pp.17-25
• /
• 1998

Transport of carbon and boron impurity ions parallel to magnetic field lines in the tokamak SOL (scrape-off layer) is numerically investigated for a one-dimensional steady state. The spatial distributions of density and velocity of the impurity ions in a steady state are calculated by finite difference method for a single-fluid model. The calculated results show that among forces acting on SOL particles thermal force produced tv plasma temperature gradient is a principal force determining the feature of impurity distribution profiles in the tokamak edge. However, strong collisional friction forces appearing dominant in front of the diverter plate restrain impurity ion flows due to temperature gradients from moving toward the midplane. Consequently, the stagnation point develops in the impurity flow by these two forces near the diverter region, in which ion flows change their directions. Impurity ions turn out to be accumulated at the stagnation points, where peaked profiles of highly-ionized state ions are relatively predominant over those of low-ionized state ions.

• Journal of the military operations research society of Korea
• /
• v.10 no.2
• /
• pp.61-73
• /
• 1984

A block replacement policy using items with different reliability is discussed. We divide system unit failure modes into two modes and use less reliable unit when operating unit fails near the planned preventive replacement time. In this policy, item A has two failure modes. Mode-1 failure is removed by minimal repair, mode-2 failure by replacement. If mode-2 failure of item A happens in (0, $T-{\delta}$), failure item A is replaced by new item A. If mode-2 failure of item A happens in ($T-{\delta}$, T), failure item A is replaced by new item B. Item B should be cheaper and less durable than item A. Under this policy, we determine the preventive replacement interval $T^{*}$ and the interval ${\delta}^{*}$ of item B replacement which minimize the cost rate per unit time.

• International journal of advanced smart convergence
• /
• v.9 no.3
• /
• pp.137-140
• /
• 2020

Orthogonal time frequency space (OTFS) modulation is considered as one of the solutions to cope with high mobility channel environments. It converts the time-varying channel to the near-constant channel response in the delay-Doppler domain. This modulation scheme also benefits from the diversity in two-dimensional modulation. According to recent researches, this method outperforms the conventional OFDM modulation, especially in high-speed channel conditions. In this paper, to investigate the performance of OTFS in a practical system, channel estimation in the delay-Doppler domain is compared with the conventional method in the time-frequency domain at different mobile speeds. Simulation results confirm that the delay-Doppler domain channel estimation brings a better performance compared to the conventional one under the same overhead rate.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.103-106
• /
• 2001

A remediation technology consisting of biodegradation and a modified Fenton reaction was developed to degrade mixtures of polycyclic aromatic hydrocarbons (PAHs) at a former manufactured gas plant (MGP) site. The original Fenton reaction (i.e., $H_2O$$_2$ + Fe$^{2+}$) was modified to be biocompatible by using ferric ions and chelating agents such as catechol and gallic acid. The modified reaction was effective in degrading PAHs at near neutral pH and thus was compatible with biodegradation. By the combined treatment of the modified Fenton reaction and biodegradation, more than 98% of 2- or 3-ring hydrocarbons and between 70 and 85% of 4- or 5-ring compounds were degraded in the MGP soil, while maintaining its pH about 6.6.

• The Journal of the Korean dental association
• /
• v.21 no.5 s.168
• /
• pp.415-423
• /
• 1983

A total of 202 full coverage crowns from 31 patients was investigated to find out the relationships between crown contour and gingival response. Every experimental crown has its contralateral natural tooth for its control group. Gingival Index and buccolingual width of the crowns were measured on both experimental and control group. Following conclusions were obtained from the study. 1. Most of the crown restorations were overcontoured and the increments were servere at cervical and height of contour area. 2. Height of contour and contact point of the restored crown were located near cervical area. Besides, most crowns had narrow embrasure with wide contact area. 3. Gingival Index around crown restorations was significantly larger than that of control group. 4. the interrelationship between Gingival Index and restored material or restored period was not verified at 5% significant level. 5. When grouping the artificial crowns into overcontoured, normal contoured, and undercontoured group by their width increment, the gingival inflammation was the severest in the overcontoured group and the mildest in the undercontoured group.