• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1626-1626
• /
• 2001

In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M_{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima $\Delta$t and the variation of full width at half maximum Δw were strongly dependent on the detection position and the wavelength of the laser beam. At, $\Delta$t and $\Delta$w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.7
• /
• pp.7-14
• /
• 2000

In this paper, we propose a near-field target localization algorithm using a bottom-mounted linear sensor amy in a multipath environment. In a multipath environment, the conic angles of a target signals through each path are different, and the position of the target can be estimated using these conic angles and the time difference of these signals. We derive equations on the relation of time-difference of signals and conic angles estimates under the far-field assumption, and estimate the position of target by simultaneously solving these equations. For a certain geometry of a target and the sensor array, there exist cases when the conic angles are very close. In such a case, we estimate the position of the target using an additional 1-D search.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.4-11
• /
• 2005

In this paper, we propose novel optics design for media inside near-field recording (NFR) using hemispherical solid immersion lens (HMS). To obtain strong advantage of data protection and high data capacity simultaneously, HMS based near field optics using aplanatic position of super hemisphere is designed. In this design, to improve small optical tolerance of this aplanatic position, additional aspheric lens surface is added on top of the HMS and it is combined with zoom optics which composed of two single lenses having low numerical aperture (NA). Also, to compensate chromatic aberration which happens seriously in optics using blue laser diode, diffractive optical element is used. Using zoom optics, additional aspheric lens surface, and diffractive optical element together, wavefront aberration and chromatic aberration are effectively reduced in broad range of cover layer thickness and wavelength variation. In addition, In this paper, effect of gap induced aberration is investigated by analyzing different behavior of each TM and TE wave for designed media inside dual-layer NFR optics.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.13-20
• /
• 2006

In this paper, we propose novel optics design for media inside near-field recording(NFR) using hemispherical solid immersion lens(HMS). To obtain strong advantage of data protection and high data capacity simultaneously, HMS based near field optics using aplanatic position of super hemisphere is designed. In this design, to improve small optical tolerance of this aplanatic position, additional aspheric lens surface is added on top of the HMS and it is combined with zoom optics which composed of two single lenses having low numerical aperture(NA). Also, to compensate chromatic aberration which happens seriously in optics using blue laser diode, diffractive optical element is used. Using zoom optics, additional aspheric lens surface, and diffractive optical element together, wavefront aberration and chromatic aberration are effectively reduced in broad range of cover layer thickness and wavelength variation. In addition, in this paper, effect of gap induced aberration is investigated by analyzing different behavior of each TM and TE wave for designed media inside dual-layer NFR optics.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.4
• /
• pp.745-758
• /
• 2005

This paper presents a statistical analysis on the position-specific distributions of amino acid residues in transmembrane proteins. A hidden Markov model segments membrane proteins to produce segmented regions of homogeneous statistical property from variable-length amino acids sequences. These segmented residues are analyzed by using chi-square statistic and relative-entropy in order to find position-specific amino acids. This analysis showed that isoleucine and valine concentrated on the center of membrane-spanning regions, tryptophan, tyrosine and positive residues were found frequently near both ends of membrane.

• International Journal of Ocean System Engineering
• /
• v.1 no.2
• /
• pp.60-67
• /
• 2011

This paper presents an in-situ correction method to compensate for the position error of an autonomous underwater vehicle (AUV) near the sea floor. AUVs generally have an inertial navigation system assisted with auxiliary navigational sensors. Since the inertial navigation system shows drift in position without the bottom reflection of a Doppler velocity log, external acoustic positioning systems, such as an ultra short baseline (USBL), are needed to set the position without surfacing the AUV. The main concept of the correction method is as follows: when the AUV arrives near the sea floor, the vehicle moves around horizontally in a circular mode, while the USBL transceiver installed on a surface vessel measures the AUV's position. After acquiring one data set, a least-square curve fitting method is adopted to find the center of the AUV's circular motion, which is transferred to the AUV via an acoustic telemetry modem (ATM). The proposed method is robust for the outlier of USBL, and it is independent of the time delay for the data transfer of the USBL position with the ATM. The proposed method also reduces the intrinsic position error of the USBL, and is applicable to the in-situ calibration as well as the initialization of the AUVs' position. Monte Carlo simulation was conducted to verify the effectiveness of the method.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.61-64
• /
• 2007

Subsurface Internal Waves (IWs) can be detected in satellite images as periodic alternating brighter/darker stripes. It is known that there are two types of IWs - depression type and elevation type - depending on the water depth in stratified oceans. In this study, we have quantitatively verified the process of converting polarity from depression waves to elevation waves using ERS-2 SAR images acquired over the northern South China Sea. We simulated the evolution of IWs near a turning point with a numerical model for internal wave propagation. The simulation results near the turning point clearly showed us not only a conversion process of IWs from depression to elevation waves, but also a similar wave pattern with the observed SAR image. We also simulated SAR intensity variation near the turning point. The upper layer currents were computed at regular intervals using the numerical model, as the IWs were passing through the turning point. Then, an integrated hydrodynamic-electromagnetic model was used for simulating SAR intensity profiles from the upper layer currents at each position. The simulated SAR intensity profiles at each position were compared with the observed SAR intensities.

• Geomechanics and Engineering
• /
• v.38 no.3
• /
• pp.285-305
• /
• 2024

This study investigates the behaviour of hunchback retaining walls supporting unsaturated sandy backfill under active earth pressure conditions. Utilizing a horizontal slice method and a unified effective stress methodology, the influence of various factors on lateral earth pressure, including the position of the hunch along the wall, friction angles, and wall heights, is explored. The results suggest that relocating the hunch position from close to the wall's top to near its base leads to a significant decrease (ranging from 54% to 81%) in lateral earth pressure. However, as the hunch position transitions from near the top to mid-height, the point of application of active thrust shifts upward initially, then slightly downward as the hunch position approaches the toe. Notably, the reduction in lateral earth pressure is more pronounced for shorter wall heights and higher friction angles. Building upon these findings, an Artificial Neural Network (ANN)-based model is developed to accurately predict the lateral earth pressure coefficient and point of application, achieving R² values of 0.94 and 0.93, respectively. In addition, an analytical model based on Coulomb's earth pressure theory is presented and compared with ANN models. These models are anticipated to assist designers and practitioners in optimizing hunchback retaining walls for unsaturated backfill.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.15 no.2
• /
• pp.98-111
• /
• 2004

Background and Objectives : The purpose of this study is to analyze the difference of Fundamental Frequency(Hz), Closed Quotient(Qx ; %), Intensity(dB), Vocal tract length and width(cm), formant frequency(Hz), level of formant frequency(dB) depending on the larynx position. Materials and Methods : One professional male singer(career : 28 years) produced sustained vowel /a/,/e/,/i/,/o/,/u/ in two larynx position (higher, lower) with Dr. Speech and video fluoroscopy was used to quantify the vocal tract morphology. Results : In lower larynx position, CQ is increased 9.8% and Intensity is increased about 10% and level of Formant Frequency is increased. And also Vocal tract length is longer 2.4cm, Vocal tract width(Anterior width : 0.4cm, lateral width : 0.2cm) is wider than in higher larynx position. Conclusions : Singer's formant has a prominent spectrum envelope peak near 2400-2600Hz by clustering of F3, F4 and F5 near 3400Hz in lower larynx position.

• Membrane Journal
• /
• v.25 no.3
• /
• pp.268-275
• /
• 2015

Effects of aeration intensity on local fouling were investigated in submerged membrane modules. Higher liquid velocities were observed at the section with the lower fiber packing density. The liquid velocity is increased with increasing the gas-liquid injection factor. The high shear stress coincided with the high liquid velocity. The shear stress increases with the increasing of gas-liquid injection factor and the liquid velocity improves with the increasing of gas-liquid injection factor. Irreversible fouling resistance ($R_{ir}$) of the fiber position is significant in a local region of high suction pressure near the suction point of the fiber (position 1). The ratio of $R_{ir}/R_m$ and $R_{ir}/R_r$ of position 1 was highest compared to the position 2 and 3. Irreversible fouling resistances results confirmed the preferential deposition of foulants near the suction part of the fiber where the local suction pressure is the highest and correspondingly, more particles are accumulated to the membrane surface. The effects of local fouling along the fiber length are significant factors to optimize the design of submerged modules.