• 한국지능시스템학회논문지
• /
• 제25권3호
• /
• pp.293-298
• /
• 2015

해상교통상황에서 수집된 선박 조우(Encounter) 데이터 변수는 선박 충돌 및 근접사고(Near-Collision) 위험도를 통계적인 방법에 의한 분석이 가능하다. 본 연구에서는 선박 조우 데이터에서 추출되는 다수의 선박충돌위험도 평가 변수들을 요인분석(Factor Analysis)하여, 선박 조우데이터에서 충돌위험에 영향을 미치는 주요 요인을 결정하고자 한다. 각 요인 결정을 위해 선박조우데이터 변수 정규분포화 및 표준화를 수행한 후 주성분 분석(Principal Component Analysis)으로 요인을 결정하였다. 요인분석결과 선박 근접도 요인과 충돌회피변화요인으로 요약하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1999-2004
• /
• 2004

Collision avoidance for the aircraft can be stated as a problem of maintaining a safe distance between aircrafts in conflict. Optimal collision avoidance problem seeks to minimize the given cost function while simultaneously satisfying the constraints. The cost function can be a function of time or input. This paper addresses the trajectory time-optimization problem for collision avoidance of the unmanned aerial vehicles. The problem is difficult to handle, because it is a two points boundary value problem with dynamic environment. Some simplifying algorithms are used for application in on-line operation. Although there are more complicated problems, by prediction of conflict time and some assumptions, we changed a dynamic environment problem into a static one.

• International Journal of Aeronautical and Space Sciences
• /
• 제5권2호
• /
• pp.43-53
• /
• 2004

Collision avoidance for multiple aircraft can be stated as a problem ofmaintaining safe distance between aircraft in conflict. Optimal collision avoidanceproblem seeks to minimize the given cost function while simultaneously satisfyingconstraints. The cost function could be a function of time or control input. This paper addresses the trajectory time-optimization problem for collision avoidance of unmanned aerial vehicles(UAVs). The problem is difficult to handle in general due to the two-point boundary value problem subject to dynamic environments. Some simplifying aleorithms are used for potential applications in on-line operation.Although under possibility of more complicated problems, a dynamic problem is transformed into a static one by prediction of the conflict time and some appropriate assumptions.

• Bulletin of the Korean Chemical Society
• /
• 제10권4호
• /
• pp.372-374
• /
• 1989

The new viscosity theory is applied to the abnormal behavior of the viscosity near the critical point. This theory suggests that the viscosity is equal to the product of the absolute pressure(kinetic pressure + internal pressure) and the collision time. We can find this abnormal behavior to be due to the large collision time near the critical point. The agreements between theoriticals and experimentals of the critical enhancement are satisfactory.

• 한국항만학회지
• /
• 제14권2호
• /
• pp.219-231
• /
• 2000

In this paper a complicated structural behavior in collision and its effects of energy translation to the collision bulkhead was examined through a methodology of the numerical simulation to obtain a ideal bow construction and a location of collision bulkhead against head on collision. In the present the bow structure is normally designed in consideration of its specific structural arrangements and internal and external loads in these area such as hydrostatic and dynamic pressure, wave impact and bottom slamming in accordance with the Classification rules, and the specific location of collision bulkhead by SOLAS requirement. By these studies the behavior of the bow collapse due to collision was synthetically evaluated for the different size of tankers and its operational speed limits, and by the results of these simulation it provides the optimal design concept for the bow construction to prevent the subsequent plastic deformation onto or near to the collision bulkhead boundary and to determine the rational location of collision bulkhead.

• 한국해양공학회지
• /
• 제14권2호
• /
• pp.28-35
• /
• 2000

In this paper a complicated structural behavior in collision and its effect of energy transmission to the collision bulkhead was examined through a methodology of the numerical simulation to obtain a ideal bow construction and a location of collision bulkhead against heat on collision. At present the bow structure is normally designed in consideration of its specific structural arrangement and internal and external loads in these areas such as hydrostatic and dynamic pressure wave impact and bottom slamming in accordance with the Classification rules and the specific location of collision bulkhead by SOLAS requirement. By these studies the behavior of the bow collapse due to collision was synthetically evaluated for the different size of tankers and its operational speed limits and by the results of these simulation it provides the optimal design concept for the bow construction to prevent the subsequent plastic deformation onto or near to the collision bulkhead boundary and to determine the rational location of collision bulkhead.

• 해양환경안전학회지
• /
• 제7권3호
• /
• pp.41-59
• /
• 2001

Recently, as the coastal trading is being increased rapidly, risk of collision being increased especially in the coastal route near around the port of Wando. In this paper, with the reference to various literatures and papers on collision avoidance rules, the navigational rules and regulations for the coastal area-especially for the narrow channel-are construed and introduced in brief. Also, 3 collision cases near around the port of Wando and statistical data during 5 years(1996 to 2000) are studied. The results of this study are as follows; 1. It is strongly recommended to separate the route of east-bound and west-bound in this area due to removing the risk of collision between the vessels in reciprocal way. 2. The owner of the fleet should lead that the master should con the vessel by himself when passing this area. 3. For the introduction of the Coastal VTS, it is required to investigate the capability to cooperate with military radar sites which based on all over the coast.

• 해양환경안전학회지
• /
• 제23권3호
• /
• pp.231-241
• /
• 2017

The purpose of this study was to analyze traffic safety assessments for fishing vessels near the southwest offshore wind farm. This study applied a collision model for safety assessment. It also involved a spatiotemporal analysis of vessels engaged in fishing to identify fishing hotspots around the offshore wind farm. This study used data from fishing vessel location transmission devices gathered over 1 year in 2014. As a result, in September, when the average number of vessels engaged in fishing is high, 62 ships were operating in fishing section 184-6 and 55 ships in section 184-6. In addition, in fishing sections 184-8 and 192-2, where an offshore wind farm was located, there were 55 and 38 ships operating, respectively. As the recovery period for a seaway near wind farm turbines is 55 years, it was determined that safety measures are required in order to reduce collision frequency while allowing fishing vessels to navigate through offshore wind farms. Meanwhile, the return period of Seaway B between the groups of generators considered was 184 years. A safety zone for offshore wind farms should be installed covering a distance of at least 0.3 NM from the boundary of turbines. Then, the collision return period was derived to be close to 100 years. Through this traffic safety assessment, it has been concluded that such measures would help prevent marine accidents.

• 한국해양공학회지
• /
• 제37권6호
• /
• pp.247-255
• /
• 2023

Interference and collisions often occur in the loading process at shipyards. Existing simulation methods focus primarily on resource processes and schedules, and there is a lack of real-time reflection in the complex and highly variable loading process. This study aims to develop a spatial environment incorporating real-time product data, such as hulls, and confirms its effectiveness by simulating various construction scenarios. As a method, a near real-time spatial environment based on broadband laser scanning was established, with the situation of loading heavy cargo assumed when converting an existing ship into an LNG dual-fuel propulsion ship. A case study simulation of near-real-time cargo loading processes was then conducted using Unity 3D to confirm the interference and collision risks within the spatial environment. The results indicated that interference occurred in structures previously not identified in the design data, and a collision occurred during the loading object erection phase. The simulation confirmed that the identification of interference and collision risks during the erection phase highlights the need for a relocation or removal process of potential hazards before erection takes place. An improved erection simulation that integrates near real-time data could effectively prevent interference and collision risks.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.195-204
• /
• 2000

In this paper a complicated structural behavior in collision and its effect of energy translation to the collision bulkhead was examined through a methodology of the numerical simulation to obtain a ideal bow construction and a location of collision bulkhead against head on collision. In the present the bow structure is normally designed in consideration of its specific structural arrangements and internal and external loads in these area such as hydrostatic and dynamic pressure, wave impact and bottom slamming in accordance with the Classification rules, and the specific location of collision bulkhead by SOLAS requirement. By these studies the behavior of the bow collapse due to collision was synthetically evaluated for the different size of tankers and its operational speed limits, and by the result of these simulation it provides the optimal design concept for the low construction to prevent the subsequent plastic deformation onto or near to the collision bulkhead boundary and to determine the rational location of collision bulkhead.