• Journal of the Korean Magnetics Society
• /
• v.11 no.5
• /
• pp.232-238
• /
• 2001

Experimentally it is well known that the magnetic properties significantly deteriorate when nanocomposite bonded magnet are made from nanocomposite ribbon. A decrease in maximum energy product of F $e_3$B+N $d_2$F $e_{14}$B nanocomposite from 14 MGOe in nanocomposite ribbon to 6.5 MGOe in powder compact was fecund to be general. Thus, the present study is focused on finding out the root of exchange decoupling of N $d_4$F $e_{73.5}$ $Co_3$H $f_{0.5}$G $a_{0.5}$ $B_{18.5}$ nanocomposite powder compacts. The exchange decoupling behavior of the powder compact of F $e_3$B+N $d_2$F $e_{14}$B composition was studied by measuring DC demagnetization and isothermal remanent demagnetization curves, which are essential for plotting produced $\delta$M curve. From the $\delta$M plot the deterioration in the magnetic properties resulted from the fact that the magnetostatic interaction became dominant rather thanthe exchange interaction in powder compact. It is concluded that the demagnetization behavior governed by the dominant magnetostatic interaction reduced the remanence magnetization, which caused the reduction of maximum energy Product of the powder compact. We also found that the elimination of residual stress which is unavoidably accumulated during grinding process enhanced the magnetic properties considerably.bly.bly.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.214-214
• /
• 2003

• Clean Technology
• /
• v.28 no.2
• /
• pp.110-116
• /
• 2022

In this study, iron oxide (FeO_x) nanoparticles were synthesized using iron (Fe) by-products recovered from NdFeB permanent magnet scraps, and the effect of heat-treatment temperature on the physical properties of the FeO_x nanoparticles was investigated. In order to prepare the FeO_x nanoparticles, 2.0 M ammonia (NH₄OH) solution was added to an iron by-product solution diluted to c.a. 10 wt% in D.I. water, which led to the precipitation of the iron oxide precursor. Then, the FeO_x nanoparticles were synthesized by heat-treatment at 300 ℃, 400 ℃, 500 ℃ and 600 ℃. After that, the physical properties of the FeO_x nanoparticles were investigated in order to understand the effect of the heat-treatment temperature. The results of the X-ray diffraction (XRD) analysis showed that the diffraction peak in accordance with the <104> direction increased as the heat-treatment increased, and a diffraction peak indicating the α-Fe₂O₃ crystal structure was detected at heat-treatment temperatures above 500 ℃. The BET specific surface area analysis revealed that the specific surface area decreased as the heat-treatment temperature increased to above 400 ℃. Observation with a high resolution transmission electron microscope (HRTEM) showed that rod-shaped nanoparticles were formed, and the size of the nanoparticles showed a tendency to increase as the heat-treatment temperature increased.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.184.1-184.1
• /
• 2007

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.95-97
• /
• 2006

Cogging torque is often a principal source of vibration, noise and difficulty of control in BLDC motors. Therefore, this paper will present a design method of magnetization system with sinusoidal air-gap flux density distribution of Nd-Fe-B magnets in ring type for reduction of Vibration and Noise and low manufacturing cost.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2014.05a
• /
• pp.82-83
• /
• 2014

• Proceedings of the Korean Magnestics Society Conference
• /
• 2013.05a
• /
• pp.78-78
• /
• 2013

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.104-106
• /
• 2001

In this paper, it is object of design of high efficiency slotless BLDC motor using film coil. Slotless BLDC motor is able to have high efficiency property and low cogging torque, due to magnetization of stator core have constant contribution by slotless core. But it is difficult to make coil winding of slotless BLDC motor. So we make amateur of slotless BLDC motor using film coil. Film coil is fabricated by drilling, electro-plating and etching of copper/insulator/copper plate. In this paper, after design of slotless BLDC motor for moving axial blower, it is fabricated by NdFeB permanent magnet type rotor and film coil.

• Resources Recycling
• /
• v.27 no.3
• /
• pp.8-15
• /
• 2018

Solvent extraction behavior of light rare earth elements (Pr, Nd) and medium rare erath elements (Tb, Dy) in the HCl-PC88A-kerosene extraction system was investigated in order to separate high-purity light rare earths (Pr, Nd) and medium rare earths (Tb, Dy) in the mixed rare earth chloride solution. In the batch test step, it was confirmed that the separation efficiency was good when the extractant concentration (PC88A) was 0.5 M, the equilibrium pH after extraction was 0.8 to 1.0 (initial pH 1.3 of the feed), the concentrations of hydrochloric acid in scrubbing solution was set as 0.1 M, the concentrations of hydrochloric acid in stripping solution was set as 2.0 M or more. Based on the experimental data obtained from the batch test, the mixer-settler was composed as follows; 4 stages of extraction, 8 stages of scrubbing, 4 stages of stripping, and 3 stages of pickling organic solution. The Mixer-settler was operated for 180 hours, and the operating conditions were continuously adjusted to obtain the high-purity light/medium rare earths. Finally, the purity of light (Pr, Nd) and medium rare earth elements (Tb, Dy) was reached as 3 N class.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.4
• /
• pp.333-339
• /
• 1995

The reduction and diffusion process(R-D process) is an economical way to produce the functional materials which contain rare-earth elements and has been applied to the production of rare-earth magnet meterials($SmCo_5$, $Nd_{15}Fe_{77}B_8$), magneto-optical(MO) target materials and hydrogen storage alloy, etc. However, because of difficult to control of the final composition, the R-D process has not been applied to production of the 2-17 type rare earth permanent magnet materials which contain several elements. Therefore, this work was as a basic study for the production of the 2-17 type rare earth permanent materials with composition $Sm(Co_{0.72}Fe_{0.21}Cu_{0.05}Zr_{0.03})_{7.9}$ by the R-D process, the following were mainy examined ; the amount of metallic calcium as a reductant, homogenization condition of the alloy after the R-D reaction, masuring of magnetic properties of the sample after step aging. The sample prepared by the R-D process contained a little more oxygen than that prepared by the melting method, however, showed almost the same magnetic properties.