• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.189-191
• /
• 1994

YBCO bulks for levitation have fabricated using MPMG method. The superconducting properties and repulsive/attractive force against permanent magnet were investigated for the specimens annealed at various periods after MPMG. A linear induction motor type levitation - traveling vehicle using the pinning force of MPMG processed YBCO bulk has fabricated. The floating or hanging small vehicle mounted with two YBCO pellets was confirmed to travel stabley on the Nd-Fe-B permanent magnet track. The traveling speed of the vehicle was confirmed to depend on AC frequency linearly. At 200 Hz, the travel ins speed was found to be 110 cm/sec.

• Journal of Magnetics
• /
• 제4권2호
• /
• pp.52-54
• /
• 1999

Injection molding is one of the methods to prepare dielectromagnets-permanent magnets made from hard magnetic powder (or from mixture of powders) bonded by dielectric materials. Magnetic properties of dielectromagnets are worse than those of sintered magnets made from the same hard magnetic powders, but this type of the permanent magnet has many advantages. One of them is simpler technology-easier in comparison to the technology of sintered magnets. The injection molded dielectromagnets do not need any final treatment. This technology permits to control magnetic, thermal and mechanical properties of dielectromagnets. The main chracteristics of dielectormagnets are magnetic properties, however mechanical properties have serious influence onto a range of their applications. The main factors shaping mechanical properties have serious influence onto a range of their applications. The main factors shaping mechanical properties of dielectromagnets are the kind and quantity of resin and the technology. The purpose of this investigateion was to find the correlation between infection conditions and the mechanical properties of dielectromagnets. Influence of two parameters of injection, temperature and pressure on mechanical and magnetic properties of dielectromagnets were not significantly changed. Increasing of pressure of injection also does not influence on mechanical properties of analysed samples, however increasing of temperature of injection significantly improved both compression and bending strength.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.300-303
• /
• 2011

The effect of the hot-compaction temperature on the microstructure and magnetic properties of anisotropic nanocrystalline magnets was investigated. The hot-compaction temperature was found to impact both the magnetic properties and the microstructure of die-upset magnets. The remanence of the isotropic precursor increases slightly with the improved hot-compaction temperature, and the grains start to grow on the flake boundary at higher hot-compaction temperatures. After hot deformation, it was found that the change in the magnetic properties was the inverse of that observed with the hot-compaction temperature. Microstructural investigation showed that die-upset magnets inherit the microstructural characteristics of their precursor. For the die-upset magnets, hot pressed at low temperature, scarcely any abnormal grain growth on the flake boundary can be seen. For those hot pressed at higher temperatures, however, layers with large equiaxed grains could be observed, which accounted for the poor alignment during the hot deformation, and thus the poor magnetic properties.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권1호
• /
• pp.30-35
• /
• 2017

The effects of the crystallographic orientation and sample thickness on the magnetic levitation forces (F) and trapped magnetic field (B) of single grain YBCO bulk superconductors were examined. Single grain YBCO samples with a (001), (110) or (100) surface were used as the test samples. The samples used for the force-distance (F-d) measurement were cooled at 77 K without a magnetic field (zero field cooling, ZFC), whereas the samples used for the B measurement were cooled under the external magnetic field of a Nd-B-Fe permanent magnet (field cooling, FC). It was found that F and B of the (001) surface were higher than those of the (110) or (100) surface, which is attributed to the higher critical current density ($J_c$) of the (001) surface. For the (001) samples with t=5-18 mm, the maximum magnetic levitation forces ($F_{max}s$) of the ZFC samples were larger than 40 N. About 80% of the applied magnetic field was trapped in the FC samples. However, the F and B decreased rapidly as t decreased below 5 mm. There exists a critical sample thickness (t=5 mm for the experimental condition of this study) for maintaining the large levitation/trapping properties, which is dependent on the material properties and magnitude of the external magnetic fields.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.260-260
• /
• 2013

Multiferroic materials have attracted much attention due to their fascinating fundamental physical properties and technological applications in magnetic/ferroelectric data-storage systems, quantum electromagnets, spintronics, and sensor devices. Among single-phase multiferroic materials, $BiFeO_3 $ is a typical multiferroic material with a room temperature magnetoelectric coupling in view of high magnetic-and ferroelectric-ordering temperatures (Neel temperature $T_N$~647 K and Curie temperature $T_C$~1,103 K). Rare-earth ion substitution at the Bi sties is very interesting, which induces suppressed volatility of Bi ion and improved ferroelectric properties. At the same time, Fe-site substitution with magnetic ions is also attracting, and the enhanced ferromagnetism was reported. In this study, $Bi_{1-x}Dy_xFe_{0.95}Co_{0.05}O_3$ (x=0, 0.05 and 0.1) bulk ceramic compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Dy_2O_3$, $Fe_2O_3$ and $Co_3O_4$ powders with the stoichiometric proportions were mixed, and calcined at $500^{\circ}C$ or 24 h to produce $Bi_{1-x}Dy_xFe_{0.95}Co_{0.05}O_3$. The samples were immediately put into an oven, which was heated up to $800^{\circ}C$ nd sintered in air for 30 min. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The field-dependent magnetization measurements were performed with a vibrating-sample magnetometer. The electric polarization was measured at room temperature by using a standard ferroelectric tester (RT66B, Radiant Technologies).

• 청정기술
• /
• 제28권2호
• /
• pp.103-109
• /
• 2022

Nd-Fe-B 폐영구자석 스크랩에는 희토류가 약 20~30% 함유되어 있고 철이 약 60~70% 함유되어 있으며, 황산침출 및 분별결정법을 통하여 희토류 및 철 성분을 회수하고자 하였다. 희토류와 철을 분리·회수하기 위하여 산화배소를 하지 않고 황산농도 및 광액농도비를 변수로 하여 침출특성을 확인하였다. 황산침출은 농도별로 3시간 동안 침출을 진행하였고 침출된 고상을 X-ray diffraction (XRD) 및 XRF (X-ray florescence spectrometry) 분석으로 결정상 및 조성 및 정량적 성분을 확인하였으며, 여액은 ICP 분석을 시행하였다. 3M 황산농도에서 침출했을 경우 네오디뮴 황산화물로 형성되었고 철 성분이 가장 적으며 회수율이 높았다. 남은 여액은 증발농축을 통하여 분별결정법을 하였으며 네오디뮴 성분은 7.0배 농축되었고 철 성분은 2.8배 농축되었다. 본 논문에서 폐영구자석의 산화배소 공정단계 없이 황산침출 및 분별결정법을 통한 희토류 성분의 회수율은 약 99.4%로 확인되었다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권11호
• /
• pp.601-611
• /
• 2002

As resent trends in structural construction have been to build taller and larger structures than any time in the past, they have had high flexibility and low damping that can cause large vibration response under severe environmental loading such as earthquakes, winds, and mechanical excitations. The damper with mass and sqring is one aproach to safeguarding the structure against excessive vibrations. In this paper, a large capacity hybrid-type linear motor damper(LMD) was designed and fabricated for the application to the vibration control of a large building structure model. It has been designed to be able to move the damper mass, 1,500 kg up to ${\pm}250mm$ strokes at the first mode natural frequency of the building structure model, ${\pm}0.51Hz$. Linear motor is consisted of the fixed coil and the movable NdFeB permanent magnets field part. The PM field part composed magnet modules and iron yoke, is the damper mass itself, 1500kg. LMD therefore has a simplified structure and requires a few elements in the driving system, being compared with a rotary motor damper and a hydraulic damper. However, the manufacture of large PM linear actuator is difficult because of the limit of PM size and the attraction and repulsion at the assembly of PM. Therefore, large damper system is manufactured and tested for dynamic characteristics and frequency response.

• 대한지역사회영양학회지
• /
• 제5권2호
• /
• pp.161-171
• /
• 2000

The purpose of this study was to investigate the effects of smoking and/or alcohol drinking on the nutrient intake, nutritional status, and eating habits of adult males. The subjects were 157 male adults aged 20-49 living in Daejon. Interviews with questionaire on smoking and alcohol drinking habits and eating habits, anthropometric measurement, biochemical blood test, and dietary assessment by one-day 24 hour recall and two-day diet record were carried out. The subjects were divided into four groups : control (non-smoking and non-drinking), drinking only, smoking only, and the both(drinking and smoking). The average numbers of smoked cigarettes were 17.8/d and 19.1/d in the smoking only group and the both group, respectively. The frequency of alcohol drinking was 8.3 times/month and 11.6 times/month in the drinking only group and the both group, respectively. Height was significantly higher(P 0.05) in the drinking only group than in the none and smoking only groups, while the other anthropometric indices were not different among the four groups. There were positive correlations between smoking and drinking or coffee intake. Alcohol drinking increased eating-out frequency and the intakes of energy, protein, dietary fiber, vitamin A, B$_1$,$ B_6,$ Fe and P, while smoking decreased snack frequency and intakes of energy, protein and vitamin $ B_6,$. Blood pressure was not changed in the smoking only and drinking only groups compared to the none group, while systolic blood pressure was elevated in both group(P 0.05). Alcohol drinking significantly elevated(P 0.05) serum total cholesterol and LDL-cholestrol level, while smoking did not change the serum lipid and cholesterol levels. Hemoglobin nd MCHC levels were significantly elevated(P 0.05) by smoking. From these data, it is suggested that both smoking and drinking have influence on some eating habits and nutrient intakes, and especially alcohol drinking can induce hypercholesterolemia.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.180-180
• /
• 2000

Plasma source ion implantation is a new doping technique for the formation of shallow junction with the merits of high dose rate, low-cost and minimal wafer charging damage. In plasma source ion implantation process, the wafer is placed directly in the plasma of the appropriate dopant ions. Negative pulse bias is applied to the wafer, causing the dopant ions to be accelerated toward the wafer and implanted below the surface. In this work, inductively couples plasma was generated by anodized Al antenna that was located inside the vacuum chamber. The outside wall of Al chamber was surrounded by Nd-Fe-B permanent magnets to confine the plasma and to enhance the uniformity. Before implantation, the wafer was pre-sputtered using DC bias of 300B in Ar plasma in order to eliminate the native oxide. After cleaning, B2H6 (5%)/H2 plasma and negative pulse bias of -1kV to 5 kV were used to form shallow p+/n junction at the boron dose of 1$\times$1015 to 5$\times$1016 #/cm2. The as-implanted samples were annealed at 90$0^{\circ}C$, 95$0^{\circ}C$ and 100$0^{\circ}C$during various annealing time with rapid thermal process. After annealing, the sheet resistance and the junction depth were measured with four point probe and secondary ion mass spectroscopy, respectively. The doping uniformity was also investigated. In addition, the electrical characteristics were measured for Schottky diode with a current-voltage meter.

• 한국재료학회지
• /
• 제12권3호
• /
• pp.215-219
• /
• 2002

For the purpose of annihilating tumor in body, hematoporphyrin as a photosensitizer was coated onto magnetic particles of $Fe_3O_4$ prepared by coprecipitation which could be concentrated around the tumor by magnetic field. The photosensitizer was applied differently before, during and after adsorbing the 1st surfactant on the particles. Its added amount was $5{\times}10^{-4}/mol$, and the coating reaction proceeded at temperatures of 60, 70 and 8$0^{\circ}C$. The amounts of photosensitizer coated on the magnetic particles were obtained by calculating an optical density with the maximum UV spectrum. As a result of the UV analysis, the coating amount of photosensitizer increased with higher reaction temperatures. When applied at 8$0^{\circ}C$ after adsorbing the 1st surfactant, the photosensitizer was coated with a maximum value of $3.8{\times}10^{-3}/mo1/$\ell$$. The TGA analysis revealed that the ferrofluids included the particles of 30.115 g/$\ell$. It was suggested that the magnetite particles was coated with photosensitizer of $1.26{\times}10^{-4}/mo1/g$. A small-sized device for magnetic field and light emission was designed, in which LED sheets coverts the permanent magnet of Nd-Fe-B. The LED sheet was connected in series circuit and also protected with a silicon tube. The power was supplied with rechargable battery of 9V and 100-120mA.