• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.1
• /
• pp.51-58
• /
• 2006

The objective of this research work is to investigate into heat transfer characteristics of the laser cutting of CSP 1N sheet using high power CW Nd:YAG laser. In order to investigate the heat transfer characteristics, three dimensional quasi stationary and steady-state heat transfer analysis has been carried out. The laser heat source is assumed as a volumetric heat source with a gaussian heat distribution in a plane. Through the comparison of the results of analyses with those of experiments, the proper finite element model has been obtained. In addition, characteristics of the three-dimensional heat transfer and temperature distribution have been estimated by the finite element model. Finally, the minimum temperature at the center for cutting of the material has been estimated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.125-128
• /
• 1995

The remote sleeve repair-welding technology using the pulsed Nd:YAG laser for increasing the lifetime of the steam generator tube in the nuclear power plant has been developed. The laser welding has many advantages on deep penetration depth and narrow heat affect zone(HAZ). The inconel 600 tube and inconel 690 sleeve used high temperature and high pressure service have been welded as round lap welds. It is found that the relation between the connection width and welding parameters. It is found that the shear strength in proportion to the connection width by conducting tensile-shear tests.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.25-26
• /
• 2005

This study suggested the occurrence source of weld-defects and its solution methods in a welding of Electrolyte injection hole by pulsed Nd:YAG laser. In experiment, the ramp down was used in order that solidification crack was removed. Furthermore, shrinkage stress and heat input were reduced by changing of weld trajectory and defocused distance. As a results of a experiment, a sound weld bead shape and crack-free weld bead can be obtained.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.6
• /
• pp.740-745
• /
• 2006

This study suggested the occurrence source of weld-defects and its solution methods in a welding of Electrolyte injection hole by pulsed Nd:YAG laser. In experiment, the ramp down was used in order that solidification crack was removed. Furthermore. shrinkage stress and heat input were reduced by changing of weld trajectory and defocused distance. As a results of a experiment, a sound weld bead shape and crack-free weld bead can be obtained. In conclusion this show that the welding stability is greatly affected by modulation of laser pulse shape for the same laser energy and welding parameters.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.5
• /
• pp.35-43
• /
• 2007

Laser welding of metals has been widely used to improve a wear resistance and a corrosion resistance of the industrial parts. The objective of this research works is to investigate the influence of the process parameters, such as the welding for metals with CW Nd:YAG lasers. The bead-on-plate welding tests are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the butt welding, the welding quality of the cut section, stain-stress behavior and the hardness of the welded part are investigated. From the results of the investigation, it has been shown that the optimal welding condition without defects in the vicinity of the welded area and with a good welding quality is 1325W of the laser power, and 1.4m/min of laser welding speed.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.46-47
• /
• 2000

고출력, 고효율, 그리고 고품질의 빔특성을 갖는 DPSSL을 개발하기 위해서는 출력빔을 저하시키는 원인인 비균일한 여기빔 분포에 의한 레이저 결정내의 열렌즈, stress 복굴절 등의 효과를 최소화하여야 한다. 지금까지 열효과를 줄여, 고출력이나 TE $M_{00}$ 모드의 레이저 빔을 얻기위한 방법으로 zigzag 슬랩 디자인$^{1)}$ , VPS 여기 시스템$^{2)}$ , Cusp 형 반사체$^{(3)}$ , 광섬유 결합$^{(4)}$ 등의 방법이 연구되어 왔다. 본 연구에서는 고출력, 고효율, 그리고 고품질의 레이저 빔특성을 동시에 만족하는 레이저를 개발할 목적으로 산란된 여기빔을 이용하는 여기구조를 고안하고 열효과가 감소된 Nd:YAG 레이저 시스템을 최적설계하였다. (중략)략)

• Proceedings of the KWS Conference
• /
• 1999.10a
• /
• pp.95-98
• /
• 1999

본 논문에서는 Nd:YAG 레이저 용접 시 열 복사의 색수차를 이용한 광학적 감시 방법 및 실시간 자동 초점 제어에 관한 연구를 기술한다. 광학적 감시 및 제어를 위해 두 개의 파장을 선택하였고, 색수차를 최적화 하였다. 실시간 자동 초점 제어는 두 신호의 비를 감시하고 이 신호의 비를 이용하여 초점을 항상 유지하도록 함으로써 임의의 형태로 구부러진 시편의 용접이 가능하였다.

• Proceedings of the KWS Conference
• /
• 2008.05a
• /
• pp.47-47
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.93-94
• /
• 2006

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.248-249
• /
• 2000

최근 "혼돈제어"라는 몇 가지 방식이 증명되어 여러 시스템에서 혼돈스런 출렁임을 제거하게 되었다. 처음으로 OGY(Ott Grebogi Yorke) 방법에 기초를 둔 Occasional Proportional Feedback(OPF) 방식이 Roy에 의해 고체레이저 system 에 적용되었다$^{(1)}$ . 또 High Frequency Injection(HFI) 방식으로도 혼돈을 제어할 수 있음이 발표되기도 했다$^{(2),(3)}$ . 우리의 실험에서는 단일모드로 발진하는 Nd:YAG 레이저에서 일어나는 혼돈현상을 관측하려 한다. (중략)