• ETRI Journal
• /
• v.18 no.1
• /
• pp.15-27
• /
• 1996

The effects of $Nd_2O_3$ and $TiO_2$ addition on the microstructures and microwave dielectic properties of $BaO-Nd_2O_3-TiO_2$ system were investigated. $BaNd_2Ti_4O_{12}$ or $BaNd_2Ti_{5}O_{14}$ phases were observed for compositions based on BaO/$Nd_2O_3$ = 1 ratio. The compositions deviated from $BaO/Nd_2O_3=1$ ratio were composed of major phases of $BaNd_2Ti_4O_{12}$ or $BaNd_2Ti_5O_{14}$, and the compound of $Nd_2O_3$ and $TiO_2(Nd_2Ti_2O_7)$ or that of BaO and $TiO_2(BaTi_4O_9)$. The microstructure of ceramic with $BaO{\cdot}Nd_2O_3{\cdot}4TiO_2$ composition varied from spherical grains to needlelike grains with increasing sintering temperature. With increasing $Nd_2O_3$, the optimum sintering temperature with maximum density increased, and the dielectric constant(${\varepsilon}_r$) and quality factor(Q) decreased due to the formation of secondary phases. With increasing $TiO_2$, the optimum sintering temperature and the dielectric constant decreased with increased Q value. And the temperature coefficient of resonant frequency, ${\tau}_f$ shifted toward positive direction. The dielectric ceramics with $BaO/Nd_2O_3=1$ showed Q values of above 2000 and dielectric constants of above 80 at 3GHz.

• Journal of Korean Academy of Nursing
• /
• v.25 no.2
• /
• pp.279-294
• /
• 1995

The purpose of this study was to determine values and value changes in clinical nurses in clinical situations. A survey was conducted of 200 nurses of one of university hospital in Seoul Korea. This study was conducted between July 1 and July 5, 1994, using the Survey of Interpersonal Values (SIV) developed by L. V. Gordon, and standardized for Korea by Kyung Hye Lee & Eung Yun Hwang. The results of the study were as follows, 1. The clinical nurses surveyed showed Independence(18.32 : 63rd percentile) as their highest value, with Support(14.8 : 62nd percentile) next and then Benevolence(16.28 53rd percentile), Leadership(9.06 : 46th percentile), Conformity(18.15 : 42nd percentile) and Recognition(18.32 : 41s1 percentile) in that order in the area of general values. Using a standardised women's value Indicator, the clinical nurses value orientation was within the 32nd∼69th percentile indicating means found among Korean women in general. 2. Looking at how the values were related to demographics, Leadership was most highly valued among the 30∼34 year olds and least valued among the 25∼29 year olds. Unmarried nurses valued Independence more than married nurses did, and junior college graduate nurses valued Conformity more than baccalaureate graduate nurses did. 3. The study showed that the values of with less than one year (16.00) clinical experience were higher than those who had over 10 years (13.60) clinical experience (p<.05). Therefore clinical experience did not positively influence value orientation for clinical nurses. 4. There was no significant differences in the value of nurses in relation to their workplace, their level of motivation, or their aptitude. The study shows that clinical nurses have similar values compared with ordinary Korean women. This means that professional nurses may not be able to satisfy client needs and also that they do not have satisfaction and a positive attitude regarding the nursing profession. Therefore it is suggested that new strategies and continuing education programs be established to help clinical nurses fomulate higher values.

• Journal of the Korean Ceramic Society
• /
• v.22 no.6
• /
• pp.71-79
• /
• 1985

In order to fabricate the translucent electrooptic ceramics which are comparable to PLZT, $PNZT^*$ has been prepared from aqueous solutions of their itrate and chlorides. In the quarternary $Pb^{1-x} Nd_x(Zr_{0.63} Ti_{0.37})^{1-\frac{x}{4}O_3$, (PNZT) $(0.02\le x\ge 0.12)$ system cold-pressed PNZT slugs were sintered in $O_2$ in pt-crucible for 45 min. at 118$0^{\circ}C$ and were then heat-treated in air for 60 hrs. at 120$0^{\circ}C$ in Al2O3 crucibles containing $PbZrO_3$ powder to control the atmosphere. Mean particle size of calcined PNZT powders was 0.1~0.15${\mu}{\textrm}{m}$. It was found that the maximum value of optical transmission has been revealed at 6~8 at. % $Nd_2O_3$ added body and that their dielectric constant has been decreased as the frequency increased. Curic temperature has been varied inversely with $Nd^{3+}$ ion content up to 8 at. % and become constant above this value. $^*Pb_{1-x}Nd_x(Zr_{0.63} Ti_{0.37})_{1-2/4}O_3$

• Journal of the Society of Disaster Information
• /
• v.4 no.2
• /
• pp.52-66
• /
• 2008

It has been a growing concern about reusing Sudokwon landfill 2nd site and other sanitary landfills located around the metropolitan areas. In this paper, settlement characteristics of Sudokwon landfill 2nd site were studied by analyzing the data collected over the period of six years. Three equations are combined in order to modeling the long-term settlement behavior of refuse landfill caused by mechanical secondary composition and secondary composition caused by the decomposition of biodegradable refuse. It is suggested that mechanical secondary composition is linear with respect to the logarithm of time. The models proposed by hyperbolic method and Gibson & Lo model, power creep law are considered to be suitable for the long-term prediction value of Sudokwon landfill 2nd site. The fifteen-year-period prediction value of hyperbolic method and Gibson & Lo model is considerably different from that of power creep law model. The average settlement for Block I in Sudokwon 2nd site is approximately 3.9m with 4 steps of final landfill stages.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.346-349
• /
• 2002

Ferroelectric $Bi_{4-x}Nd_{x}Ti_{3}O_{12}(BNdT)$ thin films with the composition(x=0.75) were prepared on $Pt/Ti/SiO_{2}/Si(100)$ substrate by metal-organic deposition. The films were annealed by various temperatures from 550 to $650^{\circ}C$ and then the electrical and structural characteristics of BNdT films were investigated for the application of FRAM. Electrical properties such as dielectirc constant, 2Pr and capacitance were quite dependent on the thermal heat treatment. The measured 2Pr value on the BNdT capacitor annealed at $650^{\circ}C$ was $56{\mu}C/cm^{2}$ at an applied voltage of 5V. In fatigue characteristics value remained costant up to $8{\times}10^{10}$ read/write switching cycles at a frequency of 1Mhz regardless of annealing temperatures.

• Journal of Magnetics
• /
• v.14 no.1
• /
• pp.27-30
• /
• 2009

Various sintered magnets containing $28{\sim}31\;wt%$ Nd and $0{\sim}7\;wt%$ Dy were evaluated for coercivity and irreversible flux loss as a preliminary study to develop highly-coercive, high-temperature magnets that can be applied for driving motors in a hybrid vehicle. The sintered magnets were prepared in sequence of strip casting, HD treatment, jet milling, magnetic field pressing, sintering and post-annealing. Increasing Dy content and adjusting post-annealing temperature monotonically increased coercivity of magnets from about 14 kOe to 30 kOe. A magnet containing 28 wt% Nd and 7 wt% Dy exhibits a $(BH)_{max}$+$_i{H_c}$ value of almost 64. This is very close to what the automobile industry considers as the minimum value (65) for a hybrid vehicle system. Moreover, irreversible flux loss of the magnet was about 3% at $200^{\circ}C$, which is well less than the allowable limit (5%) to a driving motor in hybrid vehicles.

• Restorative Dentistry and Endodontics
• /
• v.6 no.1
• /
• pp.63-70
• /
• 1980

This study was to determine the incidence of pulp stone in each tooth by means of analyzing 375 orthopantomograph taken from 375 patients (252 male), 125 female). The pictures were grouped by age, 20s, 30s, 40s, 50s, and sex. The results were as follows 1. In the group of 20s, male showed the highest incidence in the first molar (40~50%) and the second highest was in the 2nd molar about 35%~50%. In the female group, the first molar and the second molar showed 25%~40%. 2. In the group of 30s, the highest value was found on the first molar and the next was the 2nd molar which appeared 30%~40% in male. In the female, the first molar was 55%~70% and the 2nd molar 30%~50% 3. In the group of 40s, the first molar represented highest value about 45%~60% and the 2nd molar was 40~60% in the male. Female group also showed in the first molar 30%~50% and the second molar 25~30%. 4. In the group of 50s, the highest incidence was 40%~60% on the first molar and next was 35%~50% on the second molar in male, in femalegroup showed 30%~50% on the first molar and 25%~50% on the second molar. 5. The incidence in upper was higher than that of lower. 6. Comparison between right and left showed right was slightly higher than left side.

• Journal of the Korean Ceramic Society
• /
• v.34 no.5
• /
• pp.461-466
• /
• 1997

Dielectric and piezoelectric properties of (Pb1-1.5xLnx)(Ti0.98Mn0.02)O3 ceramics with x=0~0.2 have been investigated. Pb(Ti0.98Mn0.02)O3 showed poor sinterability and cracking on cooling, but the substitution of Nd3+ ions into Pb2+ sites resulted in dense microstructures without cracking through reducing crystallographic anisotropy. The Nd3+ substitution, however, deteriorated the temperature stability of the piezoelectric properties because of lowering the Curie point. Electromechanical anisotropy(Kt/Kp) indicated a maximum value of 10 when x=0.1. This result might be attributed to the counteracting effects that with increasing x, the lattice anisotropy decreases while the poling becomes easier due to the increase in O2- vacancy concentration. Thickness-shear mode resonators with (Pb0.85Nd0.1)(Ti0.98Mn0.02)O3 composition showed good resonant characteristics around 4.5 MHz.

• Laser Solutions
• /
• v.4 no.2
• /
• pp.47-57
• /
• 2001

This study deals with the laser cutting of stencil for the PCB. The most important aim of this study is to determine optimal conditions which make good-qualify stencil in Nd:YAG laser cutting. We made an experiment according to various variables (power. type of mask. gas pressure, cutting speed, and pulse width) and analyzed the cutting characteristics (surface roughness, kerf width. dross) . Each variable has optimal value for good-qualify cut edge under fixed condition. And neural network after learning experimental data with a million time iteration could predict surface roughness of cut edge under arbitrary condition approximately.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.8
• /
• pp.636-640
• /
• 1994

The nonstoichiometric perovskite solid solutions of the $Nd_{1-x}Sr_xFeO_{3-y}$ system for the compositions of x=0.00, 0.25, 0.50, 0.75, and 1.00 have been prepared at $1150^{\circ}C$ in the air pressure. The compound of x=0.00, NdFe$O_{3.0}$, contains only $Fe^{3+}$ ion in octahedral site and the others involves the mixed valence state between $Fe^{3+}$ and $Fe^{4+}$ ions. The mole ratio of $Fe^{4+}$ ion or the ${\tau}$-value increases steadily with the x-value and then is maximized at the compositionof x= 1.00. The nonstoichiometric chemical formulas of the system are formulated from the x, ${\tau}$ and y values. From the Mossbauer spectroscopy, the isomer shift of $Fe^{3+}$ ion decreases with the increasing x-value, which is induced by the electron transfer between the$Fe^{3+}$ and $Fe^{4+}$ ions. The transfer is made possible by the indirect interaction between $Fe^{3+}$ and$Fe^{4+}$ ions via the oxygen ion. The eg electrons of the$Fe^{3+}$ ions are delocalized over all the Fe ions. Due to the electron transfer, the activation energy of electrical conductivity is decrease with the increasing amount of $Fe^{4+}$ ion.