• 전기학회논문지
• /
• 제67권1호
• /
• pp.29-37
• /
• 2018

Inrush current and fault current in a transformer need to be distinguished from one another. In order to do this, KEPCO uses a 2nd harmonic restraint/block method. We use two setting values for 2nd harmonic restraint; 15% and 10%. We also apply per-phase blocking method among various harmonic restraint methods. If the transformer is located at the radial system, we adjust 10% in the 2nd harmonic restraint, but this method is not enough to prevent mal-operations of the current differential relay and let us spend more time to change setting value again as the power system changes. In this paper, a more reasonable setting value for a 2nd harmonic blocking scheme in KEPCO is proposed. To present a proposed method, the fault data of the current differential relays which have occurred since 2009 are analyzed. To evaluate the performance of the proposed method, the results of the RTDS test for the current differential relay of the transformer by KEPCO are analyzed.

• 한국세라믹학회지
• /
• 제35권8호
• /
• pp.775-782
• /
• 1998

This experiment is third study concerning BaO-{{{{ { { Pr}_{ 2} O}_{3 } }}-{{{{ { TiO}_{2 } }} (Ln=Sm, Nd, Pr, La..) system which is known to show a high dielectric constant and Q value in microwave dielectric materials. The process of cry-stallization and the microwave dielectric properties of the specimens sintered at 1220-140$0^{\circ}C$ for 2 hr was investigated in the BaO-(Na,{{{{ { { Pr})_{2 }O }_{3 } }}-{{{{ { TiO}_{2 } }} as well as BaO-{{{{ { { Pr}_{ 2} O}_{3 } }}-{{{{ { TiO}_{2 } }} system. The single phase BaPr2Ti5O14 and Ba(Nd,{{{{ { { Pr})_{2 }O }_{3 } }}Ti5O14 was finally formed from the Pr2Ti2O7 (Nd, Pr)2Ti2O7 as a secondary phase in the BaO-{{{{ { { Pr}_{ 2} O}_{3 } }}-{{{{ { TiO}_{2 } }} and BaO-(Nd, {{{{ { { Pr})_{2 }O }_{3 } }}-{{{{ { TiO}_{2 } }} system respectively The dielectric constant of the specimens sint-ered at 1280~131$0^{\circ}C$ showed the maximum value as 105(BaO-{{{{ { { Pr}_{ 2} O}_{3 } }}-{{{{ { TiO}_{2 } }} system) and 88 (BaO-(Nd,{{{{ { { Pr})_{2 }O }_{3 } }}-{{{{ { TiO}_{2 } }} system) and the Q values of them showed higher value than 1800 which are due to the maximum den-sity. However the dielectric properties of the specimens sintered at higher temperature than 131$0^{\circ}C$ were reduced due to the increases of pore which were resulted from the sudden grain growth.

• 한국세라믹학회지
• /
• 제39권1호
• /
• pp.26-32
• /
• 2002

유전율(${\varepsilon}_r$) 126, $Q{\cdot}f_{0}(GHz)$값은 2240, 공진주파수의 온도계수(${\tau}_f$) $+68\;ppm/^{\circ}C$의 특성을 갖는 $0.3CaTiO_3-0.7(Li_{1/2}Nd_{1/2})TiO_3에\;Nd_2O_3$를 첨가하였을 때의 마이크로파 유전특성의 변화에 대해 고찰하였다. 유전율(${\varepsilon}_r$)은 5wt% $Nd_2O_3$ 첨가시 131로 가장높은 값을 나타내었으며, 이후 첨가량이 증가함에 따라 유전율은 감소함을 보였다. $Q{\cdot}f_{0}(GHz)$값은 9wt% $Nd_2O_3$ 첨가시까지 입계의 치밀화 등에 의해 3533까지 증가하다가 이후 l8wt% $Nd_2O_3$첨가시까지는 비정상적 입계성장의 영향으로 감소함을 보이고, 25 wt% 이상 첨가시에는 제2상인 $Nd_2Ti_2O_7$상의 영향으로 다시 증가함을 보였다. 공진주파수의 온도계수($({\tau}_f$)는 $Nd_2O_3$첨가에 따라 최초의 $+68\;ppm/^{\circ}C$에서 30wt% $Nd_2O_3$ 첨가시 $-46\;ppm/^{\circ}C$까지 변화함을 알 수 있었다. $0.3CaTiO_3-0.7(Li_{1/2}Nd_{1/2})TiO_3에\;Nd_2O_3$를 9wt% 첨가하여 $1425^{\circ}C$에서 3시간동안 소결한 시편에서 유전율(${\varepsilon}_r$)은 108, $Q{\cdot}f_{0}(GHz)$값은 3533, 공진주파수의 온도계수(${\varepsilon}_f$)가 $+6\;ppm/^{\circ}C$인 우수한 마이크로파 유전특성을 얻을 수 있었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권8호
• /
• pp.819-829
• /
• 1997

The microwave dielectric materials of the BaO-Nd$_2$O$_3$-TiO$_2$and BaO-(Sm, Nd)$_2$O$_3$-TiO$_2$system were synthesized by conventional ceramic processing and sintered 1220 to 140$0^{\circ}C$ for 2 hours respectively. Their crystallization and dielectric properties were examined. In the BaO-Nd$_2$O$_3$-TiO$_2$ and BaO-(Sm, Nd)$_2$O$_3$-TiO$_2$system. Nd$_2$Ti$_2$O$_{7}$ and (Sm, Nd)$_2$Ti$_2$O$_{7}$ were observed as a second phase respectively. The maximum relative dielectric constant were 79,99 for the BaO-Nd$_2$O$_3$-TiO$_2$system and 105.07 for the BaO-(Sm,Nd)$_2$O$_3$-TiO$_2$system and their Q-value were over 2000 at 3GHz.GHz.

• 대한전기학회논문지
• /
• 제38권6호
• /
• pp.451-457
• /
• 1989

The current-fed DC-DC converter, which is known as the most stable DC-DC converter, has a two-winding reactor in series with the input. In this paper a new double-output DC-DC converter circuit, in which the 2nd winding of the reactor is creating the 2nd output, while the 2nd winding is feeding the energy to the input in the current-fed converter, is propose. The steady state characteristics of the new circuit are clarified and it is found that the maximum value exists in the 2nd output. Furthermore, regulation characteristic is analysed by 'Slope method' and the result shows good agreement with experimental value. The 2nd output voltage regulation is performed by using regulation IC. As a result, we have achieved good regulation characteristics.

• 한국자기학회지
• /
• 제4권2호
• /
• pp.122-125
• /
• 1994

Nd 함유량을 4 at.%로 고정시킨 Nd-Fe-B 합금의 자기특성이 조사되었다. 급속응고된 $Nd_{4}Fe_{85.5}B_{10.5}$ 합금은 열처리에 의하여 ${\alpha}-Fe$ 연자성기지에 석출되며, $Nd_{4}Fe_{85.5}B_{10.5}$ 합금에 Mo, Nb, V 및 Cu의 첨가는 결정립을 미세화시켜 보자력을 향상시킨다. 그러나 ${\alpha}-Fe$ 결정립에 의한 각형성 열화는 잔류자화를 감소시킨다. $Nd_{4}Fe_{82}B_{10}M_{3}Cu_{1}$(M = Mo, Nb, V) 합금에서 보자력은 M = V < Nb < Mo로 증가하며, M = Mo에서 2.7 kOe이고, 잔류자화는 M = Mo < Nb < V순으로 증가하며 M = V에서 1.35 T이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1459-1461
• /
• 1997

The microwave dielectric ceramic properties of $CaTiO_3-(Li_{1/2}Nd_{1/2})TiO_3$ were investigated. The solid solution of $CaTiO_3-(Li_{1/2}Nd_{1/2})TiO_3$ had the perovskite structure in the range of all composition. The dielectric constant and temperature coefficient of resonant frequency of solid solution were decreased with the contend of $(Li_{1/2}Nd_{1/2})TiO_3$, whereas, the $Q{\times}f$ value was increased. In the $(1-X)CaTiO_3-X(Li_{1/2}Nd_{1/2})TiO_3$ system, the microwave properties could be controlled by the variation of X, X is weight fraction. Typical value of K=119, $Q{\times}f=2970$ and $TCF=14ppm/^{\circ}C$ were obtained for $0.2CaTiO_3-0.8(Li_{1/2}Nd_{1/2})TiO_3$.

• 암석학회지
• /
• 제20권4호
• /
• pp.207-217
• /
• 2011

이 논문에서는 영남육괴 북동부에 위치한 덕구온천지역 주변 우백질 화강암의 주성분조성, 희토류원소를 포함한 미량원소의 함량 그리고 Sm-Nd과 Rb-Sr 동위원소비를 토대로 덕구지역 주변에 분포하는 우백질 화강암의 생성시기, 조구조 환경과 중국대륙과의 연관성에 대해 토의하였다. 희토류원소 분포도는 Eu의 이상과 분포도의 형태에 따라 3종류로 분류되며, $SiO_2$의 함량과도 연관성이 깊다. 이와 같은 특성은 동일기원 마그마내 장석의 분화과정에 의한 것임을 지시해주는 것이다. 영남육괴 북동부의 덕구지역 주변 우백질 화강암의 Rb-Sr 및 Sm-Nd의 등시선 연대는 각각 $1,735{\pm}260Ma$ ($^{87}Sr/^{86}Sr$ 초기치 = $0.702{\pm}0.046,\;2{\sigma}$), $1,785{\pm}180Ma$ ($^{143}Nd/^{144}Nd$ 초기치 = $0.51003{\pm}0.00016,\;2{\sigma}$; ${\varepsilon}_{Nd}(T)=-5.9$)로서, 초기 ${\varepsilon}_{Nd}$ 값은 우백질 화강암의 마그마가 지각 물질로부터 기원되었음을 지시해준다. 특히 초기 $^{143}Nd/^{144}Nd$ 비를 토대로 한 한반도의 선캠브리아기 기반암과 중국내 북중국지괴 혹은 남중국지괴와의 비교에서는, 영남육괴의 선캠브리아기 기반암은 북중국 지과와 유사한 Nd 동위원소 지구화학적 특성을 갖는 기원물질로부터 유래되었음을 지시해준다.

• 한국레이저가공학회지
• /
• 제3권3호
• /
• pp.13-19
• /
• 2000

The stencil is a thin stainless sheet in which a pattern is formed, which is placed on a surface of plate to reproduce the pattern of electric circuit. Conventionally the stencil has been produced by etching process. This process has many anti-environmental factors. In this study, Nd : YAG laser cutting process has been applied for stencil manufacturing. The study is focused on estimating kerf width of laser cut stencil by E.B.P.(Error Back-Propagation). This algorithm is good for estimating target value from input value. In this paper, target value was kerf width, and input values were frequency, pulse width, cutting speed and laser power. E.B.P. after teaming input and target could estimate kerf width from some variables precisely.

• 한국임상수의학회지
• /
• 제19권2호
• /
• pp.125-131
• /
• 2002

The present experiment was performed in order to know the therapeutic effect of laserpuncture and aquapuncture with methionine on recovery in artificially induced hepatic damaged rats by carbon tetrachloride. The animals were divided into control, laserpuncture and aquapuncture groups. The changes of serum enzyme activities(ALT and AST), serum total protein contents, protein fractions(ALB and GLB) and A/G ratio were examined before and after application of laserpuncture and aquapuncture. In change of serum ALT activity, recovery with treatment in laser and aquapuncture groups was more rapid than that of control. The significant decreased value was shown on 3rd(P < 0.05) and 7th day(P < 0.01) after treatment in laserpuncture group and on 7th day(P < 0.05) after treatment in aquapuncture group. In addition, significance was detected on 2nd day(P < 0.05) between laserpuncture and aquapuncture groups. In change of serum AST activity, recovery with treatment in laserpuncture and aquapuncture groups was more rapid than that of control. The significant lower values on 7th day(P<0.01) in aquapuncture groups. In addition, significant low value was detected on 7th day(P < 0.05) in aquapuncture group comparing with that of laserpuncture group. The change of serum TP contents showed similar pattern in control, laser and aquapuncture groups. The significances were detected on 7th day(P < 0.05) in both experimental groups. In addition, significant high value was detected on 2nd day(P < 0.05) in laserpuncture group comparing with that of aquapuncture group. The change of serum ALB content with treatment in laser and aquapuncture groups was more rapid than that of control. The significant high value was shown on 2nd(P < 0.01), 5th(P < 0.05) and on 7th day(P < 0.01) in laserpuncture group. In addition, significant high value was detected on 3rd day(P<0.01) only in aquapuncture group comparing with laserpuncture group. The change of serum GLB content showed similar pattern among groups. The significant low values were detected on 2nd day(P < 0.05) in aquapuncture group. In addition significant high value was detected on 5th day(P < 0.01) only in laserpuncture group comparing with that of aquapuncture group. In change of A/G ratio laser and aquapuncture groups showed higher values than that of control. The significant high values were detected on 1st day(P < 0.Of) and 2nd day(P < 0.05) in laserpuncture group, and on 1st day(P < 0.05) and 2nd day(P < 0.01) in aquapuncture group. In addition, significant high value was detected on 5th day(P < 0.05) in aquapuncture group comparing with that of laserpuncture. Considering above findings collectively, it was considered that both laserpuncture and aquapuncture were effective; aquapuncture was more effective than laserpuncture for recovery of hepatic damage.