• Journal of the Korean Vacuum Society
• /
• v.5 no.1
• /
• pp.1-5
• /
• 1996

Noncrystalline films of diamond-like carbon (DLC) have been prepared by laser ablation technique at room temperature. A Q-switched Nd-YAG laser beam with wavelength of 1064 nm and pulse duration of 10 ns was focused onto a graphite target with power densities of about $10^9 W/\textrm{cm}^2$. The physical properties of the resulting films were analyzed with density, hardness, and resistivity measurements. The surface and bonding structure were investigated by atomic force microscopy (AFM), Raman spectroscopy, electron energy loss spectroscopy (EELS).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.88-91
• /
• 2003

Si nanocrystallites thin films have been fabricated by pulsed laser deposition using a Nd:YAG laser. After deposition, samples were annealed at the temperature range of 400 to $800^{\circ}C$. Hydrogen passivation was then performed in the forming gas ($95%N_{2}+5%H_{2}$) at $500^{\circ}C$. Strong violet-indigo photoluminescence has been observed at room temperature on nitrogen ambient-annealed Si nanocrystallites. As a result of photoluminescence spectra and infrared absorption spectra, we conclude that the violet-indigo PL efficiency is related with oxygen vacancy in the $SiO_x$(x= 1.6-1.8) matrix.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.361-363
• /
• 1995

High quality $Y_1Ba_2Cu_3O_{7-x}$ thin films have been fabricated by pulsed Nd:YAG laser deposition using an unusual 'off-axis' target-substrate geometry. Various properties of superconducting $Y_1Ba_2Cu_3O_{7-x}$ thin films have been studied systematically as a function of oxygen pressure during the deposition, in both 'on-axis' and the unusual 'off-axis' target substrate geometry. In the 'off-axis' geometry, one can completely eliminate the so-called 'laser droplets' form the thin surface and thus obtain smooth high qualify films. It is found that films with optimum structural and electrical properties are obtained at a lower oxygen pressure range during the 'off-axis' deposition when compared with that required in the 'on-axis' deposition geometry.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1264-1265
• /
• 2008

PLD 방법으로 undoped ZnO박막을 성장 온도별로 성장하여 박막의 광학적 특성이 변화되는 것을 관찰하였다. undoped ZnO박막은 $Al_2O_3(0001)$기판을 이용하였고, pulsed laser deposition(PLD)을 이용하여 증착을 하였다. 이때 파장이 355nm인 Nd:YAG 레이저를 이용하였고 레이저의 에너지 밀도는 1.4 $J/cm^2$ 이었다. 구조적 광학적 특성을 관측하기 위하여 XRD, SEM, PL 등을 측정하였다. PL 측정 결과 성장 온도가 증가함에 따라 undoped ZnO박막의 광학적 특성이 좋아지는 것을 관찰할 수 있었다. XRD 측정 결과도 온도별 FWHM과 intensity ratio가 점차 좋아지는 것을 볼 수 있었다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.609-614
• /
• 1996

Laser is getting more attention from increasing numbers of dental clinicians by its own several unique characteristics : precision, hemostasis, and bactericidal capacity. It also provides patients with several advantages of minimal tissue damage. faster healing with less postoperative pain and minimal use of local anesthetics. Labial or lingual frenectomies were performed successfully in three pediatric patients using Nd-YAG laser. When compared to the conventional scalpel method, less local anesthetics were needed and the bleeding control was so excellent that any suture was not necessary. The operation sites were completely healed without any infection or complication and discomfort from swelling or pain was not noted in all cases throughout the healing process.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.95-98
• /
• 1999

This paper describes preliminary discussions on spatial distribution of NO density, which is mostly contained in simulated NOX exhaust, between a wire-cylinder geometry discharge gaps by using Laser Induced Fluorescence(LIF) Spectroscopy. Spatial distribution of NO density will be measured with varying NO concentrations from 166 to 644[ppm] and diameters of central electrode from 6 to 10mm. Pulsed Nd:YAG laser, Optical Parametric Oscillator(OPO), and Frequency Doubler are used to excite NO molecules to their excited state.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.88-91
• /
• 2008

A Hybrid-Genetic-Algorithm based 3D-PTV has been constructed by introducing the conventional GA-3D-PTV. The measurement system consists of two-high-definition-cameras(1k ${\times}$ 1k), a Nd-Yag laser and a host computer. The system has been used to measure the wake of a cylinder. The Reynolds number is 1120. The structures of the wake have been quantified in detail than the results obtained ever before.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.687-688
• /
• 2008

Air flow of inside automobile HVAC module has been visualized using a high-resolution PIV technique with varying the temperature operation mode. The PIV system consists of a 2-head Nd:YAG laser(125 mJ), a high-resolution CCD camera(2K x 2K), optics and a synchronizer. A real automobile HVAC module was used directly with slight modification for clear optical windows. Some parts of the HVAC module casing were replaced with transparent windows for capturing flow images with laser light sheet beam illumination. Time-averaged velocity field were measured in three temperature control modes. Flow characteristics of the air-conditioned air flow in the automobile HVAC system were evaluated.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.691-694
• /
• 2008

Spray characteristics of the APU simplex fuel nozzle are investigated. Four flight conditions such as sea level idle, sea level max power, 20,000 feet idle, 20,000 feet max power are used as spray experimental conditions. Spray visualization was performed by using ND-YAG laser. Droplet size and velocity were measured by using PDPA(Phase Doppler Particle Analyzer) system. From the test result, SMD is 100 ${\mu}$m�� and velocity is 10 m/s at 20,000 ft idle condition. In this condition, flame unstability could be occurred due to the higher drop diameter. Therefore it is necessary to decrease the droplet diameter in the high altitude condition.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.11
• /
• pp.1483-1491
• /
• 2001

Enhancement of pulsed-laser ablation by an artificially deposited liquid film is presented. Measurements of ablation rate, ablation threshold, and surface topography arc performed. Correlation between material ablation and photoacoustic effect is examined by the optical beam deflection method. The dependence of ablation rate on liquid-film thickness and chemical composition is also examined. The results indicate that photomechanical effect in the phase explosion of liquid is responsible for the enhanced ablation. The low critical temperature of liquid induces explosive vaporization with localized photoacoustic excitation in the superheat limit and increases the ablation efficiency. Experiments were carried out utilizing a Q-swiched Nd:YAG laser at near-threshold laser fluences with negligible plasma effect (up to ∼100 MW/cm$^2$).