• 한국레이저가공학회지
• /
• 제4권2호
• /
• pp.39-45
• /
• 2001

This paper introduces a cleaning process for removing submicron-sized particles from NiP hard disk substrates by the liquid-assisted laser cleaning technique. Measurements of cleaning Performance and time-resolved optical diagnostics are Performed to analyze the physical mechanism of contaminant removal. The results reveal that nanosecond laser pulses are effective for removing the contaminants regardless of the wavelength and that a thermal mechanism involving explosive vaporization of liquid dominates the cleaning process.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.226-227
• /
• 2001

CsLiB$_{6}$O$_{10}$(CLBO) 단결정은 넓은 광투과 영역, 극자외선 영역에서의 광투과성, 비교적 큰 비선형 광학계수, 높은 레이저 광손상 문턱값 등의 우수한 특성으로 인해 극자외선 영역에서의 파장변환과 고출력 레이저의 파장변환에 매우 활발한 응용이 시도되고 있다. 본 연구에서는 CLBO 단결정을 이용하여 Nd：YAG 레이저의 1064 nm 파장을 4차 조화파인 266 nm 파장으로 변환시키고 광변환 특성을 조사하였다. (중략)

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.248-249
• /
• 2000

최근 "혼돈제어"라는 몇 가지 방식이 증명되어 여러 시스템에서 혼돈스런 출렁임을 제거하게 되었다. 처음으로 OGY(Ott Grebogi Yorke) 방법에 기초를 둔 Occasional Proportional Feedback(OPF) 방식이 Roy에 의해 고체레이저 system 에 적용되었다$^{(1)}$ . 또 High Frequency Injection(HFI) 방식으로도 혼돈을 제어할 수 있음이 발표되기도 했다$^{(2),(3)}$ . 우리의 실험에서는 단일모드로 발진하는 Nd:YAG 레이저에서 일어나는 혼돈현상을 관측하려 한다. (중략)

• 한국광학회지
• /
• 제13권1호
• /
• pp.73-78
• /
• 2002

반도체 레이저로 펌핑하는 Nd:YAG 레이저의 내부 발생형 제2차 고조파 발진 문턱 근처에서의 출력 특성을 조사하였다. 라미나 상태에 대한 분석을 통하여 제2차 고조파가 on-off간헐성을 통하여 발진한다는 것을 확인할 수 있었다. 이러한 간헐적인 특성은 비율 방정식을 이용한 수치해석에서도 볼 수 있었다.

• 한국레이저가공학회지
• /
• 제4권1호
• /
• pp.29-38
• /
• 2001

This work was carried out to investigate the welding behavior of thin A3003 Al alloy sheets by Nd : YAG laser beam. Considering bead shape and mechanical properties, the laser pulse shapes selected were two kinds of 2-division and 3-division by varying power level and pulse duration. In order to obtain optimum conditions, the factorial design method and central composite design method were applied. Tensile test, optical microscopy, micro hardness test and TEM analysis were performed. Due to the annealing caused by thermal effect during laser welding, precipitates were coarsended. The HAZ was softened and failed during tensile test. The hardness of HAZ was lower than that of base metal, since the heat input relieved the work hardening effect and caused grain growth.

• Journal of Welding and Joining
• /
• 제14권6호
• /
• pp.81-92
• /
• 1996

This study is to compare the weldability of Zircaloy-4 end cap of nuclear fuel pin using by GTA and Nd :YAG LB. The welding parameters which affect bead width and penetration depth have been investigated. The effect of joint geometry of end cap for GTAW and LBW has been studied and optimum conditions of Zircaloy-4 endcap welding have been found. Microstructures and microhardness of GTA and LB welded zones have been also compared.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.73-75
• /
• 2004

The purpose of this study is to optimize Nd:YAG laser welding parameters to seaz a Rf source into a Ti micro capsule. Ti tube ends can be sealed as some length of ぉbe end is melted and coalesced. The exact control of the melted length is the most important to get sound sealing. The Nozzle type, tube rotating speed, tilt angle, focal position, pumping voltage, pulse frequency and pulse width were selected as the Nd:YAG laser welding Parameters. These Parameters were optimized by the Taguchi experimental method using 115 orthogonal array. Appearance and cross section of the seated tube ends were examined by SEM.

• 한국전기전자재료학회논문지
• /
• 제19권2호
• /
• pp.181-184
• /
• 2006

Nd:YAG($\lambda$=266 nm, pulse) laser beam was irradiated on the PDMS surface to improve its chemical reaction, wettability, adhesive property. The various surface modification methods of PDMS were already studied using oxygen plasma, ozone and corona discharge. The surface modification using laser has the advantage of the simple experiment that only directly irradiated laser beam on the PDMS surface in the air. After the laser treatment, the PDMS surface was investigated using a contact angle measuring instrument. The contact angle was decreased with a increase of the surface oxygen content. In conclusion, the wettability of PDMS surface was improved by the laser treatment without changing of its bulk characteristics.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.213-215
• /
• 2006

Application for laser welding have increased steadily in recent years due to its benefits such as high speed, high productivity and high density energy heat source. In this article these advantages of the laser welding has been considered for Nd:YAG laser stitch welding as a substitute for spot welding of lightweight car body plates. Optimized parameters for Nd:YAG laser stitch welding have been determined comparing the economical and mechanical characteristics to match with the currently used spot welding characteristics.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.736-743
• /
• 2007

Laser welding has the advantage of high welding speed and Provides low heat distortion Thus laser welding is a very attractive process for joining thin steel sheet and surface treated steel sheet. And the major item in market for surface treated steel sheet is zinc coated steel. However. the laser welding of zinc coated steel is very difficult because of its low boiling point. Compared with zinc, on the other hand, aluminum has a high boiling point. Thus, laser weldability of aluminized steel is better than that of zinc coated steel. Moreover aluminized steel sheet is a material with excellent heat resistance, thermal reflection and corrosion resistance. The results of laser weldability of the aluminized steel for the full penetration welding will be described in this paper We focused on the investigation of the phenomenons caused by coating condition and behavior of aluminum in weld.