• Journal of Yeungnam Medical Science
• /
• 제12권2호
• /
• pp.331-338
• /
• 1995

18마리 가토의 양측 대뇌반구에 laserthemia후 발생하는 조직학적 변화와 온도변화에 따른 변성의 측정결과는 아래와 같다. 주된 조직학적 변화는 chromatin 응축, myelin 응축, 적혈구 탈색, nuclear waving, nuclear palisading과 세포괴사 등이었다. 온도 변화에 따른 변성의 정도는 $44.5^{\circ}C$이상에서 현저하였으며, 비교치 설명후 그 범위도 약 5배(1.25 mm)정도의 변화를 보였다. Laserthermia에 의한 세포괴사는 $47.5^{\circ}C$이상에서부터 현저하게 보였다. 뇌의 심부병소의 정위적 수술시 온도설정 및 병소치료 범위의 예상이 가능하다.

• Journal of the Optical Society of Korea
• /
• 제17권6호
• /
• pp.548-558
• /
• 2013

In this work, laser induced breakdown spectroscopy (LIBS) is used to investigate soil samples collected from different desert areas of Riyadh city in Saudi Arabia. Both qualitative analysis and plasma parameters are studied via the observed LIBS spectra. These experiments have been done using a Spectrolaser-7000 system with 50 mJ fundamental wavelength of Nd:YAG laser and detection delay time of 1 microsecond. Many spectral lines are highly resolved for many elements like Al, Fe, Mg, Si, Mn, Na, Ca and K. The electron temperatures Te and electron densities Ne, for the constituent of generated LIBS plasma, are determined for all the collected samples. It is found that both Te and Ne vary from one desert area to other. This variation is due to the change of the elemental concentration in different desert areas that affects the sample's matrices. Time dependent measurements have also been performed on the soil samples. While the signal-to-base ratio (SBR) reached its optimal value at 1 microsecond, the plasma parameters Ne and Te reach values of $4{\times}10^{17}cm^{-3}$ and 9235 K, respectively, at 2.5 microsecond. The later indicate that the plasma cooling processes are slow in comparison to the previously observed results for metallic samples. The observed results show also that in the future it is possible to enhance the exploitation of LIBS in the remote on-line environmental monitoring application, by following up only the values of Ne and Te for one element of the soil desert sample using an optical fiber probe.

• Journal of Periodontal and Implant Science
• /
• 제52권3호
• /
• pp.242-257
• /
• 2022

Purpose: This study investigated periodontal ligament (PDL) restoration in osseointegrated implants using stem cells. Methods: Commercial pure titanium and zirconium oxide (zirconia) were coated with beta-tricalcium phosphate (β-TCP) using a long-pulse Nd:YAG laser (1,064 nm). Isolated bone marrow mesenchymal cells (BMMSCs) from rabbit tibia and femur, isolated PDL stem cells (PDLSCs) from the lower right incisor, and co-cultured BMMSCs and PDLSCs were tested for periostin markers using an immunofluorescent assay. Implants with 3D-engineered tissue were implanted into the lower right central incisors after extraction from rabbits. Forty implants (Ti or zirconia) were subdivided according to the duration of implantation (healing period: 45 or 90 days). Each subgroup (20 implants) was subdivided into 4 groups (without cells, PDLSC sheets, BMMSC sheets, and co-culture cell sheets). All groups underwent histological testing involving haematoxylin and eosin staining and immunohistochemistry, stereoscopic analysis to measure the PDL width, and field emission scanning electron microscopy (FESEM). The natural lower central incisors were used as controls. Results: The BMMSCs co-cultured with PDLSCs generated a well-formed PDL tissue that exhibited positive periostin expression. Histological analysis showed that the implantation of coated (Ti and zirconia) dental implants without a cell sheet resulted in a well-osseointegrated implant at both healing intervals, which was confirmed with FESEM analysis and negative periostin expression. The mesenchymal tissue structured from PDLSCs only or co-cultured (BMMSCs and PDLSCs) could form a natural periodontal tissue with no significant difference between Ti and zirconia implants, consequently forming a biohybrid dental implant. Green fluorescence for periostin was clearly detected around the biohybrid implants after 45 and 90 days. FESEM showed the invasion of PDL-like fibres perpendicular to the cementum of the bio-hybrid implants. Conclusions: β-TCP-coated (Ti and zirconia) implants generated periodontal tissue and formed biohybrid implants when mesenchymal-tissue-layered cell sheets were isolated from PDLSCs alone or co-cultured BMMSCs and PDLSCs.

• Medical Lasers
• /
• 제10권1호
• /
• pp.31-36
• /
• 2021

Background and Objectives Several predicted optimal parameters for laser treatment have been suggested, making the settings subject to variation. Thus, picosecond lasers may require more data and studies to optimize the laser parameters, increase the efficacy of each session, and minimize the total number of sessions. This study evaluated the results of picosecond laser tattoo removal in variable locations, focusing on the aesthetic outcome, number of procedures, and adverse effects. Materials and Methods Nine patients who underwent picosecond laser treatment from February 2014 to July 2020 were enrolled. Before the procedures, the required number of sessions was estimated using the Kirby-Desai scale. At the end of the treatment, the patients assessed their satisfaction. The patient and two plastic surgeons assessed the clearance of the tattoo. Results The mean of the clearance was 86.6% in both the patient and investigators assessment. The patients reported satisfaction for an average score of 5.1 ± 0.78 for the aesthetic outcome, 4.5 ± 0.78 for pain, 4.1 ± 0.92 for the number of procedures, and 4.7 ± 0.97 for adverse effects. The average number of actual procedures was 6.7 ± 1.20. The average Kirby-Desai score was 7.1 ± 1.45. Their correlation coefficient was 0.803, which is considered a strong positive correlation. Conclusion Picosecond lasers have a remarkable ability to degrade smaller tattoo pigments through a photoacoustic effect. Moreover, a picosecond laser treatment for tattoo removal can be a safe and effective method. Picosecond lasers are a promising technology with the potential to optimize the treatment of tattoos.

• Medical Lasers
• /
• 제8권1호
• /
• pp.1-6
• /
• 2019

Background and Objectives A facial laceration is a commonly occurring trauma of children. In addition, appropriate treatment and scar management are very important because the psychosocial impact of facial scars is much greater in children than in adults. Materials and Methods In the authors' hospital, primary closure was conducted targeting a total of 8,924 patients from January 2015 to December 2017. Of these, scar management was conducted on 808 people using a CO₂ fractional laser and Q-Switch Nd:YAG laser. To prove the effectiveness of the laser treatment on the linear scar, the patients were divided retrospectively into children and adults and sub-divided into those who received the treatment and those who did not. The subjective satisfaction of patients was evaluated using the Numeric Rating System (NRS). The objective scar scoring was evaluated using the image panel assessment based on the Vancouver Scar Scale (VSS), and the scoring was made by averaging the evaluations of three plastic surgeons. Results Evaluated NRS showed 8.50 ± 1.83 for adults without a laser, 8.51 ± 1.47 for adults with a laser, 7.93 ± 2.10 for children without a laser, and 8.9 ± 1.24 for children with a laser. The image panel assessment revealed 7.06 ± 1.31 for adults without a laser, 6.40 ± 2.37 for adults with a laser, 6.86 ± 1.45 for children without a laser, and 5.93 ± 1.21 for children with a laser. Conclusion When the linear scar is managed using a CO₂ Fractional laser, it can be managed in children better than adults, which is believed to be useful because it leads to better satisfaction and prognosis.

• International Journal of Computer Science & Network Security
• /
• 제24권6호
• /
• pp.200-206
• /
• 2024

Laser induced breakdown spectroscopy (LIBS) technique has been used for the elemental composition of the soils. In this technique, a high energy laser pulse is focused on a sample to produce plasma. From the spectroscopic analysis of such plasma plume, we have determined the different elements present in the soil. This technique is effective and rapid for the qualitative and quantitative analysis of all type of samples. In this work a Q-switched Nd: YAG laser operating with its fundamental mode (1064 nm laser wavelength), 5 nanosecond pulse width, and 10 Hz repetition rate was focused on soil samples using 10 cm quartz lens. The emission spectra of soil consist of Iron (Fe), Calcium (Ca), Titanium (Ti), Silicon (Si), Aluminum (Al), Magnesium (Mg), Manganese (Mn), Potassium (K), Nickel (Ni), Chromium (Cr), Copper (Cu), Mercury (Hg), Barium (Ba), Vanadium (V), Lead (Pb), Nitrogen (N), Scandium (Sc), Hydrogen (H), Strontium (Sr), and Lithium (Li) with different finger-prints of the transition lines. The maximum intensity of the transition lines was observed close to the surface of the sample and it was decreased along the axial direction of the plasma expansion due to the thermalization and the recombination process. We have also determined the plasma parameters such as electron temperature and the electron number density of the plasma using Boltzmann's plot method as well as the Stark broadening of the transition lines respectively. The electron temperature is estimated at 14611 °K, whereas the electron number density i.e. 4.1 × 10¹⁶ cm^-3 lies close to the surface.

• 한국토양비료학회지
• /
• 제42권5호
• /
• pp.399-407
• /
• 2009

레이저 유도붕괴 분광법(LIBS)은 물질상태(고체, 액체, 기체)에 상관없이 신체 접촉시 오염 우려 및 미량 시료도 전처리 없이 동시에 많은 종류의 원소 분석으로 분석과정이 단순하고 신속하게 분석이 가능하며, 소형화된 레이저의 개발로 시료의 직접적인 채취가 어려운 조건의 현장분석에도 적합하다. 농산물 안정성 평가나 친환경 농업 및 정밀농업을 위한 조사 등에 활용될 수 있는 비파괴 실시간 정량분석기술로서 LIBS 분석법의 토양분석 가능성을 평가하고자 표준광물, 미국의 표준기술연구소의 표준토양, 미국 테네시주 초지 및 밭토양을 대상으로 토양 구성성분의 정성 정량적 분석에 필요한 측정조건을 조사하고 이를 토대로 LIBS에 의한 농도값과 기존의 화학분석법을 통해 측정한 결과를 비교하였다. LIBS 측정은 펄스형 Nd:YAG 레이저(Minilite II, Continuum, Santa Clara, CA)에서 나오는 1064 nm 에너지 파장의 광원을 시편의 플라즈마를 생성시키는데 사용하였고, 25 mJ/pulse 여기 에너지 빔을 펄스폭 35 ns, 펄스 반복 주기 10 Hz, 노출시간 10 s 동안 시료의 표면에 조사하였다. LIBS 분광은 0.03 nm의 해상력으로 200 nm에서 600 nm의 영역에서 50 m 이하로 분쇄하여 원형 펠렛 형태로 압축시킨 시료를 10 rpm의 속도로 회전시키면서 상온 상압의 실험실 조건에서 수행되었다. LIBS를 이용한 토양 중 주요한 원소의 적정 파장(nm)은 Al(I) 309.2 nm, Ca(I) 422.6 nm, Fe(I) 406.4 nm, Mg(I) 285.2 nm, Na(I) 589.2 nm, Si(I) 288.2 nm, Ti(I) 398.9 nm 이었다. LIBS의 피크강도가 물질 중 원소의 농도가 증가됨에 따라 각 원소의 특정 파장대에서 일정하게 증가되는 것으로 나타나고 있으나 표준물질의 LIBS의 신호비와 원소비를 통해 측정된 검량곡선의 상관계수($r^2$)는 0.863에서 0.977의 범위로 원소별로 상이할 뿐만 아니라 0.98에 미치지 못하였다. 또한, 토양 중 분석대상원소에 대하여 기존 ICP-AES에 의한 표준방법으로 분석된 시료의 측정값과 비교하여 상대적인 오차는 대략적으로 (-)40%에서 80%이상이며, 평균오차는 32.2%로 표준척도 20% 이상을 초과하였다. LIBS에 의한 토양분석은 토양의 조성과 입자의 크기에 따른 매질효과(matrix effect)로 표준물질의 검량곡선에서 결정계수가 낮고, 원소별 함량도 기준의 표준방법과 비교할 때 오차가 컸다. 따라서 LIBS에 의한 토양분석은 정성적인 분석 수준의 정밀도를 보였으며, 토양 매질의 영향을 최소화하기 위하여 기존의 분쇄 펠렛형 시료조제 및 회전측정 이외의 다양한 토양매질의 표준물질(standard reference material)의 확보, 새로운 전처리 방법 및 측정상 방법개선 등 신뢰성 있는 정량 분석을 위한 노력이 필요할 것으로 사료된다.

• 대한원격탐사학회지
• /
• 제35권6_3호
• /
• pp.1187-1195
• /
• 2019

우리는 처음으로 이산화탄소 지중 저장소에서 지표로 누출되는 이산화탄소를 원격으로 탐지 및 농도를 측정하는 라만 라이다 시스템을 개발하였다. 본 연구에서 개발한 라만 라이다의 송신단은 355 nm 파장에서 80 mJ의 에너지를 가진 레이저, 빔 익스펜더(Beam expender)로 구성되어 있으며 수신단은 망원경, 광학 수신기 및 검출기 등으로 구성된다. 실내 이산화탄소 셀 측정에서 라만 라이다의 이산화탄소 농도 측정 정확도는 99.89%였다. 또한, 우리는 라만 라이다의 이산화탄소 원거리 측정 능력을 평가하기 위해서 부경대학교에서 2019년 10월에 일주일간 야외 측정을 수행하였다. 이산화탄소 지점 측정 장비는 라만 라이다로 부터 300 m, 350 m 떨어진 곳에 위치하였다. 야외 측정 결과에서 라만 라이다로 측정된 이산화탄소 농도와 지점 측정 장비로 측정된 이산화탄소 농도와 좋은 상관관계를 보여준다. 라만 라이다와 지점 측정 장비로 측정된 이산화탄소 농도도 사이의 상관 계수(R), 평균 절대 오차(Mean Absolute Error; MAE), 평균 제곱근 오차(Root Mean Square Error; RMSE), 는 각각 0.67, 2.78 ppm, 3.26 ppm 이다.

• Tuberculosis and Respiratory Diseases
• /
• 제55권2호
• /
• pp.198-205
• /
• 2003

원발성 폐 림프종은 매우 드문 질환으로 전세계적으로 보고된 바가 흔하지 않고 특히 폐 실질의 침범 없이 기관에서 원발성으로 발생한 경우는 극히 드물며 그 대부분은 BALT 기원의 저등급 B-세포 림프종으로 알려져 있다. BALT 림프종은 오랜 기간 동안 한 곳에 국한되어 존재하고, 예후가 좋고, 얌전한 조직학적 소견을 보이는 것이 특징이다. 아직 전세계적으로 그 예가 많지 않아 표준적인 치료지침은 정해져 있지 않으나 외과적 절제, 국소 방사선 치료나 항암제 치료 등이 있으며 특히 국소성 방사선 조사는 확실히 전이가 되지 않았을 때 일차적 치료로 선택할 수 있다. 저자들은 호흡곤란을 주소로 내원한 환자에서 경기관지 조직 검사상 기관 원발성 BALT 림프종을 진단 후 경기관지 레이저 소작술 및 국소 방사선 조사치료를 시행하고 2년간의 추적관찰 기간동안 재발의 소견없이 안정적인 임상경과를 보이고 있는 기관 원발성 BALT 림프종 1예를 경험하였기에 문헌고찰과 함께 이를 보고 하는 바이다.

• 대한기계학회논문집B
• /
• 제23권10호
• /
• pp.1265-1273
• /
• 1999

PIV(Particle Image Velocimetry) velocity field measurements inside the snout of a1/10 scale model of the Zn plating process were carried out at the strip speed $V_s=1.5m/s$. Aluminum powder particles ($1{\mu}m$) and atomized olive oil ($3{\mu}m$) were used as seeding particles to simulate the molten Zinc flow and deoxidization gas flow, respectively. A pulsed Nd:Yag laser and a $2K{\times}2K$ high-resolution CCD camera were synchronized for the PIV velocity field measurement. From flow visualization study, it is found that the liquid flow in the Zn pot is dominantly governed by the uprising flow caused by the rotating sink roll, with its effect on the steel strip inside the snout largely diminished by installing of the snout. The deoxidization gas flow in front of the strip inside the snout can be characterized by a large-scale vortex rotating clockwise direction formed by the moving strip. In the rear side of the strip, a counter-clockwise vortex is formed and some of the flow entrained by the moving strip impinges on the free surface of molten zinc. The liquid flow in front of the strip is governed by the flow entering the snout, caused by the spinning sink roll. Just below the free surface a counter-clockwise vortex is formed near the snout wall. The moving strip affects dominantly the flow behind the strip inside the snout, and large amount of the liquid flow follows the moving strip toward the sink roll. The thickness of the flow following the strip is very thin in the front side due to the uprising flow, however thick boundary layer is formed in the rear side of the strip. Its thickness is increased as moving downstream toward the sink roll. Inside the snout, the deoxidization gas flow above the free surface is much faster than the liquid flow in the zinc pot. Due to the larger influx of the flow following the moving strip in the rear side of the strip, higher percentage of imperfection can be anticipated on the rear surface of the strip.