• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.48-51
• /
• 2004

The estimation of NC machining time is of significance since it provides shop floor engineers with information for the determination of the productivity of the floor as well as process schedules. The NC machining time commonly depends on NC programs since they have various important information such as tool positions, feed rates, and other miscellaneous functions. Thus, nominal NC machining time can be easily acquired based on the programs. Actual machining time, however, cannot be simply obtained because of the dynamic characteristics of a NC machine controller such as acceleration and deceleration. Hence, this study presents a NC machine time estimation model for sculptured surfaces, considering the dynamic characteristics. The estimation model uses the distribution of NC blocks according to a factor influencing the machining time. Finally, machining time is estimated by a statistical machining time estimation model representing the relationship between the block distribution and the machining time. The parameters in the model are searched out by a genetic algorithm.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.53-58
• /
• 2006

This study deals with the method of post-processing in the automatic tool path generation for 5-axis NC machining. The 5-axis NC machining cannot only cope with the manufacturing of complicated shapes, but also offers numerous advantages such as reasonable tool employment, great reduction of set-up process and so on. Thus 5-axis NC machining has been used for aircraft parts, mold and die as well as for complicated shapes such as impeller, propeller and rotor. However, most of the present CAM systems for 5-axis NC machining have limited functions in terms of tool collision, machine limits and post-processing. Especially 5-axis machine configurations are various according to the method which the rotational axes are adapted with the table and spindle. For that reason, In many cases the optimal numerical control (NC) data cannot be obtained or considerable time is consumed. To solve this problem, we applied a general post-processor for 5-axis NC machining. The validity of this post-processor should be experimentally confirmed by successfully milling to a helix shaped workpiece.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.370-374
• /
• 2005

This study deals with the method of post-processing in the automatic tool path generation for 5-axis NC machining. The 5-axis NC machining cannot only cope with the manufacturing of complicated shapes, but also offers numerous advantages such as reasonable tool employment, great reduction of set-up process and so on. Thus 5-axis NC machining has been used fur aircraft parts, mold and die as well as for complicated shapes such as impeller, propeller and rotor. However, most of the present CAM systems for 5-axis NC machining have limited functions in terms of tool collision, machine limits and post-processing. Especially 5-axis machine configurations are various according to the method which the rotational axes are adapted with the table and spindle. For that reason, in many cases the optimal numerical control (NC) data cannot be obtained or considerable time is consumed. To solve this problem, we applied a general post-processor fur 5-axis NC machining. The validity of this post-processor should be experimentally confirmed by successfully milling to a helix shaped workpiece.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.2
• /
• pp.139-144
• /
• 2023

In this study, carbon-coated porous nanofibers were prepared via electrospinning and the performance of Li[Ni_0.93Co_0.07]O₂ (NC) synthesized by electrospinning (E-NC) and co-precipitation (C-NC) was compared. E-NC had a discharge capacity of 206 mAh g^-1 at 0.1C (17 mA/g), which is 10% higher than that of C-NC (189.2 mAh g^-1). E-NC shows a high-rate performance of 118.32 mAh g^-1 (61.7%) at 5C (850 mA/g), which is 50% higher than that of C-NC (78.22 mAh g^-1 = 45.7%). Charge transfer of the carbon-coated porous nanofiber E-NC decreased by 35% compared to C-NC after 20 cycles as observed using electrochemical impedance spectroscopy. The results of this study show that the nanofiber structure with carbon coating shortens the Li-ion diffusion path, improves electrical conductivity, resulting in excellent rate performance.

• Journal of Life Science
• /
• v.28 no.6
• /
• pp.663-670
• /
• 2018

This study was performed to confirm the antioxidative and hair-growth-promotion effects of a fermented compound composed of five materials, namely Allium cepa, Cucurbita spp., Glycine max Merr., Pinus sylvestris leaf, and Sesamum indicum. An additional compound composed of two materials was composed of Allium cepa and Cucurbita spp. Antioxidative effects were measured based on DPPH radical-scavenging activity and total flavonoid content. Fermented 5-type natural compounds (5NC) showed higher DPPH radical-scavenging activity and flavonoid content than those of fermented 2-type natural compounds (2NC). Hair-growth promotion was demonstrated in vivo. Alkaline phosphatase (ALP), oid contentontenteptidase phospactivity, and macroscopic observation were measured. Experimental animals were divided into four groups based on the samples they were administered: water, pansildil (P-CON), 5NC, and 2NC. Samples were administered orally once a day at a fixed time for four weeks. Both ALP and ${\gamma}eeksactivity$ increased in the 5NC group compared with the 2NC group. In macroscopic observation, the P-CON group grew the most and were most similar to the state before shaving. The 5NC group grew hair similar to the P-CON group. In all the results, the 5NC group showed greater antioxidative and hair-growth-promotion effects than the 2NC group. Consequently, 5NC could be used as an ingredient for hair-growth promotion.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.1
• /
• pp.72-79
• /
• 2006

1,225 healthy day-old avian broiler chicks were used to investigate the effects of activated charcoal (AC, made from willow tree), hydrated sodium calcium aluminosilicates (HSCAS) and esterified glucomannan (EGM) supplementation on broiler performance, blood profiles and meat characteristics when less moldy or moldy corn was included to formulate seven isocaloric and isonitrogenous diets: Positive Control (less moldy corn diet, PC), PC+2% AC, Negative Control (moldy corn, NC), NC+0.05% EGM, NC+0.1% EGM, NC+0.5% HSCAS and NC+1% AC. PC+2% AC resulted in lower growth rate, poorer feed conversion ratio (FCR), more leg problems and higher mortality of birds than those fed PC diet (p<0.05). Inclusion of 0.05% EGM, 0.1% EGM, 0.5% HSCAS and 1% AC in NC diet did not improve average daily weight gain (ADG) or affect feed intake of birds during the first or the second three-week periods. However, 0.05% EGM tended to (p>0.05) and 0.1% EGM significantly (p<0.05) improved FCR during the first three-week period. Breast meat of NC birds had higher Minolta $L^*$ values (white) but lower $a^*$ (reddish) and $b^*$ (yellowish) values (p<0.01) than the PC birds. Addition of 0.05% EGM and 0.1% EGM in NC diet reduced the $L^*$ values (p<0.05), improved $a^*$ and $b^*$ values (p<0.05) of breast meat of birds fed NC diet, but had no effect on meat color when 0.5% HSCAS or 1% AC was included (p>0.05). Relative weight of liver to body was reduced by feeding NC diet (p<0.05) and could not be normalized by different mycotoxin adsorbents (p>0.05) to the ratio of the PC birds. Relative weight of cholecyst of NC birds was increased compared with PC birds and could only be normalized by addition of 0.05% EGM and 1% AC (p<0.05) in NC diet. NC birds had lower serum albumin level than the PC birds (p<0.05) and addition of 0.05% EGM or 1% AC in NC diet did normalize serum albumin level. Addition of 0.5% HSCAS in NC diet further reduced serum albumin, globulin, total protein and uric acid levels (p<0.05). It was concluded that lower FCR during the first three-week period of growth and deterioration of meat quality observed in bird fed moldy corn with moderate T2 and fuminisin contamination and damaged nutrients and pigment availability, might be improved by dietary supplementation of 0.05% to 0.1% EGM, but not by 1% AC or 0.5% HSCAS supplementation.

• IMMUNE NETWORK
• /
• v.5 no.3
• /
• pp.137-143
• /
• 2005

Background: Millions of people in the world are suffering from atopic dermatitis (AD), which is a chronic inflammatory skin disease triggered by Th2 immune responses. The NC/Nga mouse is the most extensively studied animal model of AD. Like human AD, NC/Nga mice demonstrate increased levels of IgE, a hallmark of Th2 immune responses. Adaptive immunity cannot be generated without help of innate immunity. Especially natural killer T (NKT) cells and marginal zone B (MZB) cells have been known to play important roles in linking innate immunity to adaptive immunity. Methods: Through flow cytometric analysis and ELISA assay, we investigated whether these lymphocytes might be altered in number in NC/Nga mice. Results: Our data demonstrated that the number of NKT cells was reduced in NC/Nga mice and IFN${\gamma}$ production by NKT cells upon ${\alpha}-GalCer$ stimulation decreased to the levels of CD1d KO mice lacking in NKT cells. However, reduction of NKT cells in NC/Nga mice was not due to CD1d expression, which was normal in the thymus. Interestingly, there was a significant increase of $CD1d^{high}B220^+$ cells in the spleen of NC/Nga mice. Further, we confirmed that $CD1d^{high}B220^+$ cells are B cells, not dendritic cells. These $CD1d^{high}B220^+$ B cells show $IgM^{high}CD21^{high}CD23^{low}$, a characteristic phenotype of MZB cells. Conclusion: We provide the evidence that there are decreased activities of NKT cells and increased number of MZB cells in the NC/Nga mice. Our findings may thus explain why NC/Nga mice are susceptible to AD.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.27-34
• /
• 2011

Cognitive Radio, which is proposed to improve the efficiency of wireless communication systems is the system to share primary user's frequency bands with a secondary user. In this situation, a secondary user uses NC-OFDM (Non-contiguous Orthogonal Frequency Division Multiplexing) to transmit data effectively without interfering with the primary user's spectrum. However, NC-OFDM, in common with contiguous OFDM, degrades the performance of the system by generating high PAPR (Peak-to-Average Power Ratio). In this paper, firstly, we analyse PAPR corresponding to the distribution of subcarriers in NC-OFDM. Then the PAPR reductions that employ the PTS (Partial Transmit Sequence) and SLM (Selective Mapping) are evaluated. Finally, the computational complexities of the PTS and SLM adopting pruned-FFT are compared with conventional PTS and SLM. Further, it is shown that the NC-OFDM with pruned-FFT is more efficient than the contiguous OFDM in terms of computational complexity and PAPR reduction performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.171-179
• /
• 2002

STEP-NC is the next generation CNC controller taking STEP-based data model as the interface scheme (or language) between CAM and CNC, and carrying out various intelligent functions. At the moment, efforts are being made worldwide to establish international standard for the new interface scheme formalized as ISO14649. As the new language is being established, increasing attention is being paid to the development of the new CNC. Korea STEP-NC is an integrated STEP-NC system taking ISO 14649 as an input, and carrying out various intelligent functions. It is composed of 5 modules: 1) Shop Floor Programming System (PosSFP), 2) Tool Path Generator (PosTPG), 3) Tool Path Viewer (PosTPV), 4) Man Machine Interface (PosMMI), and 5) CNC Kernel (PosCNC). Distinguished from other prototypes (of Europe and USA), the Korea STEP-NC is top-down designed, and bottom-up implemented comprehensively incorporating all the crucial components for realizing the full benefit of STEP-NC paradigm, without using any existing commercial CAD/CAM systems and CNC kernels. The Korea STEP-NC prototype was successfully demonstrated and evaluated in the ISO conventions Together with prototypes of Europe and USA, Korea STEP-NC will be used as a reference system fur the Triangular Conformance Test to be jointly carried out by ISO TC184 SC1, SC4, and IMS Project.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.2
• /
• pp.127-131
• /
• 2002

Critical nitrogen concentration (Nc), which is defined as the minimum % N in shoots required to maintain the maximum growth rate of top dry weight (W) at any time, was determined for rice plant. Using two rice varietal groups, japonica varieties and an indica $\times$ japonica "Dasanbyeo", 18 data points fulfilling the statistical criteria for determining Nc were obtained through eight N-fertilization experiments over two years at Suwon (37$^{\circ}$16'N), Korea. Nc dilution curve for each variety was obtained by fitting the Nc-W relationship to power function. However, The critical nitrogen curves for the two variety groups were not different statistically. Thus, a Nc dilution curve was fitted for the Nc data points pooled over the two variety groups and proposed in rice as: Nc=4.08, where W＜1.73 t h $a^{-1}$ , Nc=5.197 $W^{0.425}$3/ ($R^2$=0.964), where 1.73 t h $a^{-1}$ ＜W＜12 t h $a^{-l}$. The Nc for W＜1.73 t h $a^{-l}$ were estimated as a constant value of 4.08%, the mean value of the maximum N concentration for N-limiting condition and the minimum N concentration for N non-limiting condition. The model for Nc is applicable to diagnosing the nitrogen nutrition status during the rice growth period from emergence to heading stage. The Nc curve well discriminated the 144 data points between the N limiting and the N non-limiting groups regardless of varieties, cultural methods, and years.-limiting groups regardless of varieties, cultural methods, and years.