• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.544-547
• /
• 2009

The $Sr_{0.7}Bi_{2.3}Nb_{2}O_{9}$(SBN) thin films are deposited on Pt-coated electrode(Pt/Ti/$SiO_2$/Si) using RF sputtering method at various deposition temperature. The optimum conditions of RF power and Ar/$O_2$ ratio were 60[W] and 70/30, respectively. Deposition rate of SBN thin films was about 4.17[nm/min]. The crystallinity of SBN thin films were increased with increase of deposition temperature in the temperature range of $100{\sim}400[^{\circ}C]$, the surface rougness showed about 4.33[nm]. The capacitance of SBN thin films were increased with the increase of deposition temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.44-47
• /
• 1995

In this study, dielectric and piezoelectric properties of 0.4[0.1Bi(Ni$\_$1/2/Ti$\_$1/2/)O$_3$0.9Pb(Ni$\_$1/3/Nb$\_$2/3/)O$_3$]-0.6(PbZr$\_$y/Ti$\_$1-y/)O$_3$ceramics with Zr/Ti ratio were observed. As a results, structure of the ceramics with ZrO$_2$(y) 0.425 and 0.45 was MPB. Electromechanical coupling coefficients k$\_$p/, k$\_$31/ of the BN$\_$162/ specimen were 57.2%, 35.6% and piezoelectric constants d$\_$33/, d$\_$31/ were 720, 298[x10$\_$-12/C/N).

• Electrical & Electronic Materials
• /
• v.6 no.6
• /
• pp.537-544
• /
• 1993

기본조성이 0.5[Pb(Ni$_{1}$3/Nb$_{2}$3/)O$_{3}$]-0.5[0.65PbTiO$_{3}$ -0.35PbZrO$_{3}$] (PNN-PT-PZ)인 압전세라믹스를 NaCl-KCI를 사용한 flux의 양 및 소결온도에 따른 생성반응과 소결특성, 유전 및 압전특성을 조사하였다. 이때 1몰의 산화물에 대한 flux의 양은 0.1, 2 및 5mole로 하였으며 소결온도는 1000-1200.deg.C로 하였다. 본 연구의 flux법은 고상반응법에 비해 낮은 하소온도에서 pyrochlore상을 현저히 줄일수 있었으며 고상반응법보다 낮은 온도에서 치밀화가 이루어질뿐 아니라 유전 및 압전특성을 개선할 수 있었으며 소결온도도 낮출 수 있었다. Flux의 양이 증가할수록 결정의 입성장이 빨랐으며 유전 및 압전특성이 가장 좋은 flux의 첨가량의 조건은 1mole이었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.161-164
• /
• 2001

In this paper, we investigated the dielectric and piezoelectric properties of Pb(Sb, Nb)O$_3$-Pb(Zr, Ti)O$_3$ ceramic(PSN) for piezoelectric transformer and actuator etc. Effect of MnO$_2$ addition on the PSN ceramic was investigated. Anisotropic properties of electromechanical coupling factor and piezoelectric properties proved to be varied with amount of MnO$_2$ impurity and sintering temperature. The electromechanical coupling factor k$_{p}$ of 0.38 and the mechanical quality factor Q$_{m}$ of 1944 were obtained from the specimen with 0.4 wt% MnO$_2$ sintered at 115$0^{\circ}C$ addition. Experimental results indicated that the PSN ceramic with MnO$_2$ impurity can be effectively used for piezoelectric transformer and actuator.tor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1144-1147
• /
• 2002

Ferroelectric $Sr_xBa_{1-x}Nb_2O_6(0.25{\leq}x{\leq}0.75)$ thin films were prepared by the Ion Beam Sputtering method. Deposit onto Pt/Ti/$SiO_2$/Si(100) substrates. The deposited thin films were heat-treated for crystallization. Microstructure and crystallization behavior were examined using FE-SEM, XRD. Ferroelectric hysteresis were measured. The measured remanent polarization and coercive field values were $38{\mu}C/cm^2$ and 120kV/cm, respectively.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.838-840
• /
• 1998

$BiNbO_4$ ceramics with 0.06wt% CuO, 0.1wt% $V_{2}O_{5}$ sintered at $900^{\circ}C$. The strip line chip filter has been design and fabricated by screen printing with silver electrode after tape casting. The characteristics of the fabricated filters were compared with the simulated results. In the strip line chip filter, insertion loss value of band pass width was 3.65[dB] and return loss was 8.9[dB] and center frequency was similar that simulation results.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.3
• /
• pp.247-257
• /
• 2001

In an effort to improve the dent resistance of exterior body panels at a reduced steel thickness, the bake hardenable steels added Ti or Nb with tensile strength of 35Kgf/$\textrm{mm}^2$ were investigated. The bake hardenability increased with the annealing temperature and solute carbon content. Bake hardening of 3 to 5Kgf/$\textrm{mm}^2$ was obtained in steels with a controlled solute carbon concentration range from 6 to 10ppm. The galvannealing temperature and time had little influence on the bake hardenability. The Fe-Zn alloying reaction of 35Kgf/$\textrm{mm}^2$ BH steel was remarkably retarded due to a 0.07%P addition. The optimum galvannealing temperatures of 35Kgf/$\textrm{mm}^2$ BH steel were ranged from 520 to 56$0^{\circ}C$ in view of the Fe content and powdering resistance. The cross-section and planar views of the galvannealed coatings to characterize morphology development were discussed.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.57.2-57.2
• /
• 2011

MX 석출물 형성 원소인 V과 Nb을 첨가한 11Cr-1Mo-VNb 페라이트계 내열강의 각각의 시험 온도에서 파단 시간에 따른 미세조직의 변화를 연구하였다. 초기 조직은 템퍼드 마르텐사이트 조직을 갖고 있었으며, 고온 강도를 저하시키는 ${\delta}$-페라이트는 존재하지 않았다. 주 석출상은 $M_{23}C_6$와 MX로 확인되었다. 또한, 모든 크리프 파단재에서 응력을 받은 게이지 부분이 응력을 받지 않은 그립 부분보다 석출물 및 마르텐사이트 래스 폭의 성장이 가속되는 결과를 나타내었다. 이는 크리프 변형 중 응력 집중에 의해 래스 경계를 따라 전위가 집적되고, 이에 따른 용질원자의 확산 속도가 증가하여 석출물의 성장에 따른 래스 경계의 이동이 일어나 게이지 부분이 그립 부분보다 마르텐사이트 회복이 가속된 것으로 판단된다.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1300-1302
• /
• 1998

Residual resistance ratio ( RRR ) of Cu/Nb-Ti Superconductor wire was evaluated by fixed point method. Our measured value of RRR showed good consistency with the average value obtained from round robin test conducted by IEC/TC 90. Our test results showed that the coefficient of variation ( COV ) was kept within 2 %

• The Korean Journal of Ceramics
• /
• v.5 no.3
• /
• pp.239-244
• /
• 1999

Ultrafine lead magnesium niobate $Pb(Mg_{1/3}Nb_{2/3}) O_3$ (PMN) powders have been successfully prepared via a micro-emulsion processing technique. By stepwise hydrolysis using aqueous as the precipitant, hydroxide precursor was obtained from nitrate solutions dispersed in the nanosized aqueous domains of a microemulsion consisting of cyclohexane, non-ionic surfactant (NP5+NP9) and an aueous phase. Upon calcination of the microemulsion-derived precursor at $800^{\circ}C$, PMN powders with 100% perovskite phase was obtained.