• 제목/요약/키워드: Nb-doped $TiO_2$

검색결과 103건 처리시간 0.027초

$MnO_2$가 첨가된 0.36PSN-0.25PNN-0.39PT세라믹스의 유전 및 압전특성 (The piezoelectric and dielectric properties of $MnO_2$ doped $0.36Pb(Sc_{1/2}Nb_{1/2})O_{3}-0.25Pb(Ni_{1/3}Nb_{2/3})O_{3}-0.39PbTiO_3$ ceramics)

  • 장정완;이종덕;박상안;이성갑;박기엽
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 C
    • /
    • pp.1809-1811
    • /
    • 2000
  • High power piezoelectric materials are presently being extensively developed for applications such as ultrasonic motors and piezoelectric transformer In this study, the piezoelectric and dielectric properties of $MnO_2$ doped $0.36Pb(Sc_{1/2}Nb_{1/2})O_{3}-0.25Pb(Ni_{1/3}Nb_{2/3})O_{3}-0.39PbTiO_3$ (hereafter PSNNT), which is the morphotropic phase boundary composition of the PSN-PNN-PT system were investigated. $MnO_2$-addition into the $0.36Pb(Sc_{1/2}Nb_{1/2})O_{3}-0.25Pb(Ni_{1/3}Nb_{2/3})O_{3}-0.39PbTiO_3$ composition increases the piezoelectric coefficient up to $k_{p}{\fallingdotseq}$55.6[%] and $Q_{m}{\fallingdotseq}$252. Moreover, $MnO_2$ addition makes tetragonal phase more stable with respect to rhombohedral phase.

  • PDF

공침법에 의한 반도성 BaTiO3 제조 (Fabrication of Doped BaTiO3 by Coprecipitation Method)

  • 안영필;김복희;이태석
    • 한국세라믹학회지
    • /
    • 제25권4호
    • /
    • pp.315-320
    • /
    • 1988
  • The Nb doped BaTiO3 was synthesized by coprecipitation method using H2O2 media in region from pH 8 to pH 11. The powder prepared by using this method was crystallized at about 20$0^{\circ}C$ and average particle size was controlled by heat treatment. Because of preparation having fine particle and relatively narrow particle size distribution, high performance PTC device was made of these precipitated powders.

  • PDF

다이아몬드 엔빌 셀을 이용한 Donor doped Pb(Zr0.52Ti0.48)O3 세라믹스의 상전이 압력 연구 (The Study on Phase Transition Pressure of Donor doped Pb(Zr0.52Ti0.48)O3 Ceramics with Diamond Anvil Cell)

  • 조경호;고영호;서창의;김광주
    • 한국세라믹학회지
    • /
    • 제48권5호
    • /
    • pp.471-478
    • /
    • 2011
  • Investigations of crystal structure and phase transition of $Pb(Zr_{0.52}Ti_{0.48})O_3$ ceramics doped with A-site substitution impurity (La, Nd) or B-site substitution impurity (Sb, Nb) at 2 mol% concentration were carried out. X-ray diffraction patterns of impurities doped $Pb(Zr_{0.52}Ti_{0.48})O_3$ ceramics have been measured at pressures up to ~5 GPa with diamond anvil cell and synchrotron radiation. The patterns were obtained at room temperature using methanol-ethanol mixture as pressure-transmitting media. In order to refine the crystal structure, Rietveld analysis has been performed. The structures of impurities doped $Pb(Zr_{0.52}Ti_{0.48})O_3$ ceramics are tetragonal in space group P4mm at ambient pressure and are transformed into a cubic phase in space group Pm$\bar{3}$m as the pressure increases. In this study, when A-site substitution donor $La^{3+}$ or $Nd^{3+}$ ion was added to $Pb(Zr_{0.52}Ti_{0.48})O_3$ ceramics, the phase transition phenomena showed up at the pressure of 2.5~4.6 GPa, but when B-site substitution donor $Nb^{5+}$ or $Sb^{5+}$ ion was added to it, the phase transition appeared at relatively lower pressure of 1.7~2.6 GPa.

Unusual Electrical Transport Characteristic of the SrSnO3/Nb-Doped SrTiO3 Heterostructure

  • De-Peng Wang;Rui-Feng Niu;Li-Qi Cui;Wei-Tian Wang
    • 한국재료학회지
    • /
    • 제33권6호
    • /
    • pp.229-235
    • /
    • 2023
  • An all-perovskite oxide heterostructure composed of SrSnO3/Nb-doped SrTiO3 was fabricated using the pulsed laser deposition method. In-plane and out-of-plane structural characterization of the fabricated films were analyzed by x-ray diffraction with θ-2θ scans and φ scans. X-ray photoelectron spectroscopy measurement was performed to check the film's composition. The electrical transport characteristic of the heterostructure was determined by applying a pulsed dc bias across the interface. Unusual transport properties of the interface between the SrSnO3 and Nb-doped SrTiO3 were investigated at temperatures from 100 to 300 K. A diodelike rectifying behavior was observed in the temperature-dependent current-voltage (IV) measurements. The forward current showed the typical IV characteristics of p-n junctions or Schottky diodes, and were perfectly fitted using the thermionic emission model. Two regions with different transport mechanism were detected, and the boundary curve was expressed by ln I = -1.28V - 13. Under reverse bias, however, the temperature- dependent IV curves revealed an unusual increase in the reverse-bias current with decreasing temperature, indicating tunneling effects at the interface. The Poole-Frenkel emission was used to explain this electrical transport mechanism under the reverse voltages.

$SrTiO_3$계 Grain Boundary Layer Capacitor에서 2차 열처리 산화물의 Frit화가 유전적 성질에 미치는 영향 (Effect of the Frit of the 2nd Firing Oxide in $SrTiO_3$-Based GBLC on the Dielectric Properties)

  • 유재근;최성철;이응상
    • 한국세라믹학회지
    • /
    • 제28권4호
    • /
    • pp.261-268
    • /
    • 1991
  • The dielectric properties and microstructure of SrTiO3-based grain boundary layer (GBL) capacitor were investigated, and SrTiO3 GBL capacitor was made by penetrating the Frit (PbO-Bi2O3-B2O3 system). The Nb2O5-doped SrTiO3 ceramics were fired for 4-hours, at 145$0^{\circ}C$ in H2-N2 atomsphere to get semiconductive ceramics. The grain size of SrTiO3 sintered at reduction atmosphere had increased as the amount of Nb2O5 increases and then decreased as the amount of Nb2O5 exceeded 0.2 mole%. Insulating reagents which contained PbO-Bi2O3-B2O3 system frit and oxide mixture were printed on the each semiconductive ceramics and fired at varying temperature and for different holding time. The optimum dielectric properties could be obtained by second heat treatment at 110$0^{\circ}C$ for 1 hour, when frit paste was printed. A SrTiO3-based GBLC had the apparent permitivity of about 3.2$\times$104, the dielectric loss of 0.01~0.02 and the stable temperature coefficient of capacitance. The influence of frit paste on dielectric properties was similiar to that of oxide paste but the stability of temperature property of capacitance was improved.

  • PDF

MnO$_2$가 첨가된 Pb(Sn$_{1}$2/Nb$_{1}$2/)O$_3$-PbTiO$_3$-PbZrO$_3$ 세라믹의 유전 및 초전특성에 관한 연구 (A Study on the Dielectric and Pyroelectric Properties of the Pb(Sn$_{1}$2/Nb$_{1}$2/)O$_3$-PbTiO$_3$-PbZrO$_3$ Ceramics doped with MnO$_2$)

  • 함영욱;이능헌;이덕출
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1993년도 추계학술대회 논문집
    • /
    • pp.10-13
    • /
    • 1993
  • ln this study, x PSN - y PT - z PZ ceramics doped with w MnO$_2$were fabricated by the mixed oxide method at 1250[$^{\circ}C$] for 2[hr] and then the dielectric and pyroelectric properties were investigated. In the 0.05 PSN - 0.4 PT - 0.55 PZ specimen with 0.5[wt.%] MnO$_2$, the pyroelectric coefficient was 6.6${\times}$10$\^$-8/[C/cm$^2$$.$$^{\circ}C$], respectibly.

  • PDF

PLD 기법으로 성장된 n형 TiO2에서 Nb 도너의 활성화 에너지 (The activation Energy of the Niobium donor in n-type TiO2 film grown by Pulsed Laser Deposition)

  • 배효정;하준석;박승환
    • 마이크로전자및패키징학회지
    • /
    • 제21권4호
    • /
    • pp.41-44
    • /
    • 2014
  • 본 연구에서는 $TiO_2$에 나이오븀 (Nb) 도펀트가 주입되었을 때의 활성화 에너지를 홀 효과 측정 시스템과 온도에 따른 photoluminescence (PL) 실험을 통하여 살펴보았다. Nb 이 도핑 된 n형 아나타제 $TiO_2$ 박막은 pulsed laser deposition (PLD) 기법으로 $SrTiO_3$기판에 성장되었다. 측정 결과, Nb 도너의 활성화 에너지 값은 홀 효과 측정에서는 14.52 meV, PL 측정에서는 6.72 meV로 다소 차이를 보였다. 이 결과는 기존의 어셉터 물질의 활성화 에너지들과는 차이를 나타내고 있으며, 향후 본 연구와 같은 shallow 도너 준위의 활성화 에너지 연구에 대한 더 많은 연구가 필요할 것으로 판단된다.