• Journal of Welding and Joining
• /
• 제15권5호
• /
• pp.92-103
• /
• 1997

The purpose of this study is to improve the wear resistance and hardness of Al alloy by making a formation of the thick surface hardening layers. The thick surface hardening layers were formed by PTAW(Plasma Transferred Arc Welding), with the addition of metal powders (Cu), ceramics powders (NbC, TiC), and mixture powders (Cu+NbC) in Al alloy (A1050, A5083). Mechanical properties of overlaid layers (wear resistance, hardness) were investigated in relation to the microstructure. The results obtained are summarized as follows: The depth of penetration was increased with increasing powder feeding rate. It is considered that these increase were due to the thermal pinch effect by the addition of powders, especially, for the Cu powders, were due to the heat of reaction with the matrix. The hardness and wear resistance of overlaid layers were improved with increasing powder feeding rate. For the Cu powders, it is considered that these increase were due to the increase of the formation of ${\theta}(CuAl_2)$ phase with increasing feeding rate of Cu powers.

• 한국전기전자재료학회논문지
• /
• 제15권4호
• /
• pp.356-360
• /
• 2002

The piezoelectric properties of $0.05Pb(Al_{0.5}Nb_{0.5})O_3-0.95Pb(Zr_{0.52}Ti_{0.48})O_3+0.7wt%Nb_2O_5+o.5wt%MnO_2$ ceramics with the additive of BaCO$_3$were investigated. As the addition of BaCO$_3$increased from 0 to 0.4 wt%, the dielectric constant ($\epsilon^T _{33}$), piezoelectric constant ($d_33$), electromechanical coupling factor ($k_p$), and mechanical quality factor ($Q_m$) increased, while the dielectric loss ($tan\delta$) decreased. The highest piezoelectric and dielectric properties were observed at $1200^{\circ}C$ of the sintered temperature with 0.4 wt% of $BaCO_3$, and the properties of $d_33$, $k_p$, and $Q_m$ were 339 pC/N, 60% and 1754, respectively.

• 한국광학회지
• /
• 제8권5호
• /
• pp.377-381
• /
• 1997

MgO가 2 mole% 첨가된 LiNbO$_{3}$ 결정을 3 V/cm, 5 V/cm, 7 V/cm의 전기장에서 poling하여, 5 V/cm의 전기장이 최적의 조건임을 제2고조파발생의 온도의존도특성을 관찰하여 알 수 있었다. 결정에 공간적으로 변조된 전기장을 인가하여 온도 위상 정합 모양이 찌그러짐을 관찰하였으며, 이 결과와 잘 일치하는 계산값을 정량적으로 구할 수 있었다. 이것으로부터 제2고조파의 온도위상정합모양을 이용하여 결정의 균일성을 판단할 수 있음을 증명하였다. 5 V/cm로 poling된 단결정의 온도 위상 정합 모양으로부터 온도에 따른 복굴절의 변화율, c-축으로 전기장을 인가하여 변화된 위상 정합 온도로부터 전기장에 따른 복굴절의 변화율을 계산하였다.

• 열처리공학회지
• /
• 제6권1호
• /
• pp.17-25
• /
• 1993

The Cu - $Nb_3Sn$ composites wire as a superconducting material was prepared by in situ method as follow: Cu - 15wt.% Nb alloys which were melted in a high -frequency induction furnace and casted in bar were cold-worked up to the final diameter of 0.24 mm, electroplated with Sn, pre-treated in two steps and then diffused at $550{\sim}650^{\circ}C$ for 24 ~ 96 hrs. The overall $J_c$ and $T_c$ of the specimens were measured by the four point-probe method at 10 K in the magnetic field of 0 Tesla. The overall $J_c$ of the composites wire which diffused at $550^{\circ}C$ after pre-treating in two steps were generally higher than those of the wire at either $600^{\circ}C$ or $650^{\circ}C$. For the specimens diffused at $550^{\circ}C$, the overall $J_c$ were increased until 72 hrs. of diffusion time and then decreased. However, in case of diffusion at $600^{\circ}C$ and $650^{\circ}C$, the overall $J_c$ were gradually decreased from the beginning. The maximum overall $J_c$ obtained in this experiment was $1.3{\times}10^4\;A/cm^2$, which was measured for the specimen diffused at $550^{\circ}C$ for 72 hrs. When the specimens were diffused at $550^{\circ}C$ for 72 hrs, after pre-treating, the measured critical temperature, $T_c$ was 16.19 K. Similar $T_c$ value were obtained in other specimens regardless of diffusion time and temperature.

• 한국재료학회지
• /
• 제4권3호
• /
• pp.364-375
• /
• 1994

공냉에 의한 중탄소 비조질강은 페라이트와 펄라이트의 미세구조를 갖는다. 기존의 조질강과 비교하여 이재료는 V, Nb, Ti을 첨가하여 강도는 거의 동등한 반면 인성에 있어서 조질강에 비해 취약하다. 본 연구에서는 직접 소입 저탄소 비조질강의 기계적 성질에 미치는 몰리브덴의 영향을 조사하였다. 몰리브덴 첨가 직접 소입 비조질강은 고강도와 고인성을 나타내었다. 몰리브덴은 변태 온도를 저하시켜 미세한 구조와 균일한 석출 구조를 효과적으로 생성시킨ㄷ. 본 실험의 결과로 0.15C+0.11V+0.035Nb+1.81Mo의 재료를 유냉시켜 121MPo의 강도와 127.5J의 인성을 얻었다.

• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.276-279
• /
• 2000

Ferroelectric properties of $SrBi_2TaNbO_9$ (SBTN) thin films were changed by the amount of Bi content in SBTN. We suggested that the addition of excess Bi into the films could be accomplished by heat-treating $SBTN/Bi_2O_3/SBTN$ heterostructure fabricated by r.f. magnetron sputtering method. Excess Bi composition was controlled by the thickness of the sandwiched $Bi_2O_3$ from 0 to $400\;\AA$. When the SBTN thin films were inserted by $400\;{\AA}\;Bi_2O_3$ layer, $Bi_2Pt$ phase was formed as a second phase in SBTN films, resulting in poor ferroelectric properties. The onset temperature for hysteresis loop can be reduced by heat treating $SBTN/Bi_2O_3/SBTN$ heterostructure. The films with $SBTN/Bi_2O_3(100\;{\AA})/SBTN$ hetero-structure followed by annealing at $650^{\circ}C$ for 30 min show 2Pr and Ec of $5.66\;{\mu}C/\textrm{cm}^2$ and 54 kV/cm, respectively.

• 한국재료학회지
• /
• 제24권2호
• /
• pp.111-115
• /
• 2014

Titanium and its alloys are useful for implant materials. In this study, porous Ti-Nb-Zr biomaterials were successfully synthesized by powder metallurgy using a $NH_4HCO_3$ as space holder and $TiH_2$ as foaming agent. Consolidation of powder was accomplished by spark plasma sintering process(SPS) at $850^{\circ}C$ under 30 MPa condition. The effect of high energy milling time on pore size and distribution in Ti-Nb-Zr alloys with space holder($NH_4HCO_3$) was investigated by optical microscope(OM), scanning electron microscope(SEM) & energy dispersive spectroscopy(EDS) and X-ray diffraction(XRD). Microstructure observation revealed that, a lot of pores were uniformly distributed in the Ti-Nb-Zr alloys as size of about $30-100{\mu}m$ using mixed powder and milled powders. In addition, the pore ratio was found to be about 5-20% by image analysis, using an image analyzer(Image Pro Plus). Furthermore, the physical properties of specimens were improved with increasing milling time as results of hardness, relative density, compressive strength and Young's modulus. Particularly Young's modulus of the sintered alloy using 4h milled powder reached 52 GPa which is similar to bone elastic modulus.

• 한국세라믹학회지
• /
• 제38권11호
• /
• pp.1042-1045
• /
• 2001

Ba(Zn$_{1}$3/Nb$_{2}$3/) $O_3$-Sr(Zn$_{1}$3/Nb$_{2}$3/) $O_3$계에 대하여 소결 온도 변화와 Zr $O_2$첨가량에 따른 마이크로파 유전특성을 조사하였다. 동일 조성에서 소결 온도가 증가함에 따라 밀도가 향상되고 공진 주파수의 온도계수($ au$$_{f}$)는 감소하는 경향을 보였으나, 유전상수(K)와 품질계수(Q$\times$f)는 커다란 변화가 없었다. 또한 Zr $O_2$첨가량이 증가함에 따라 소결 시편의 밀도가 향상되었고 더불어 유전상수, 품질계수가 증가하는 경향을 보였으며, 공진 주파수의 온도계수가 감소하는 우수한 특성이 나타났다. 특히, 소결온도 1575$^{\circ}C$, 0.6 wt% Zr $O_2$를 첨가했을 때 유전상수가 최대($\varepsilon$$_{r}$=41)로 나타났으며, 공진 주파수의 온도계수는 1.0wt% Zr $O_2$를 첨가했을 때 최소($\tau$$_{f}$=+0.8ppm/$^{\circ}C$)로서 양호한 값을 얻을 수 있었다.었다.

• 한국세라믹학회지
• /
• 제35권10호
• /
• pp.1040-1048
• /
• 1998

Ferroelectric properties of{{{{ { { { {SrBi }_{2 }Ta }_{2-x }Nb }_{x }O }_{9 } }} (SBIN) thin films were affected by the amount of Bi content in SBTN. The addition of Bi into the SBTN films could be accomplished by heat treating SBTN/Bi2O3/SBTN het-erostructures fabricated by r.f. magnetron sputtering method. The variation of Bi content was controlled by changing the thickness of the sandwiched Bi2O3 in SBTN/Bi2O3/SBTN heterostructure from 50 to 400$\AA$. As changing the thickness of the sandwiched Bi2O3 in Bi2O3 films was increased from 0 to 100$\AA$ the grain grew faster and the ferroelectric pro-perties were improved. On the other hand when the thickness of Bi2O3 films was thicker than 150$\AA$ the fer-roelectric properties were deteriorated Especially for SBTN thin films inserted by 400$\AA$ Bi2O3 layer a Bi2Phase appeared as a second phase resulting in poor ferroelectric properties. The maximum remanent po-larization (2Pr) and coercive field(Ec) were obtained for the SBTN/Bi2O3/(100$\AA$)/SBTN thin films. In this case 2Pr and Ec were 14.75 $\mu$C/cm2 and 53.4kV/cm at an applied voltage of 3V respectively.

• 분석과학
• /
• 제10권1호
• /
• pp.35-42
• /
• 1997

Barium titanate 및 PZT와 같은 세라믹 축전물질의 분석을 위해 고압 산분해법을 이용한 시료 전처리 기술을 연구하였다. 질산이나 증류수를 첨가하고 염산의 농도를 변화시키면서, 이들 시료의 정량분석을 유도결합 플라즈마 방출분광법에 의해 수행하였다. 분석 결과를 보면 Ba, Mn, Zn, Si 등 대부분의 원소들은 염산의 농도에 영향을 받지 않으나, Nb와 Zr은 이에 민감한 것으로 밝혀졌다. 그러나 분해시간은 상대적으로 분석 결과에 거의 영향을 미치지 않았다. Nb의 경우에는 가장 좋은 분석 결과를 얻기 위해 염산과 증류수의 비가 3:1(v / v) 보다는 더 진해야 함을 알았다. 또한 Pb의 분석에 있어서 염산과 질산의 혼산을 사용하는 경우보다 붉은 염산만을 사용하였을 경우에 더 좋은 분석 결과를 나타내었다.