• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.492-498
• /
• 2015

With the rapid growth of technologies and demand of remotely piloted aircraft systems (RPASs), integration of such systems into the existing airspace is becoming an issue in many countries. To assess the impact of integrated operations of manned and remotely piloted aircraft (RPA), it is necessary to perform Human-in-The-Loop (HiTL) simulations of likely situations with an integrated simulation system. This paper defines several operational concepts for the integrated simulation. Several probable scenarios were developed including a traffic pattern at a small airport and an altitude maneuver at a route crossing. HiTL simulations were performed according to the developed scenarios. The simulation results are analyzed focusing on the impacts of different communication, safety, performance, and human machine interface (HMI) characteristics of RPA.

• Journal of Advanced Navigation Technology
• /
• v.14 no.1
• /
• pp.93-101
• /
• 2010

In this study, the performance characteristics of turbocharged engine is analyzed. The methods of engine performance improvements are suggested not only for full load characteristics of the engine but also for partial load characteristics of the engine, which is more frequently used in actual driving conditions. The compression ratio of the compressor is increased rapidly in a straight line pattern until 1260 engine rpm, and after that it is increased slowly to 2.5 ratio. Also the brake mean effective pressure increased until 1260 engine rpm and decreased rapidly after 1600 engine rpm. The higher the pressure ratio, the better the fuel consumption, air excess ratio and brake mean effective pressure. But those are higher in the rated revolution range than in the mid-low revolution range. The turbocharger is operated in a stable condition from 1260 rpm and its efficiency is low in the low speed range for the reason of its characteristics. The results of this study can be applied in the fundamental control methods of turbocharged engine for stable load and speed.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.165-169
• /
• 2014

Digital load is increasing suddenly for various reasons, such as easy control and management. Accordingly, a consumption pattern of load is becoming DC. However, the power supply is supplied by AC power. The load power supply substantially needs DC power. AC power has to be converted to DC power. Renewable energy sources like solar, wind, fuel cells are DC power generation, but the transfer needs to through by AC power, thus DC power has to be converted to AC power. Resultantly, a multi-stage conversion loss is constantly increasing. The power distribution system of DC-based is required for effective use of these energy sources. This requires a DC load, as well as is necessary to develop DC ELCB which are able to detect DC leakage current for implementing protection. In this study, it realize detection algorithm about DC leakage current to verify the performance of the sensor and apply it to the ELCB which is based on DC. Therefore, it is expected to protect operating of DC power distribution system.

• Journal of the Korean Institute of Navigation
• /
• v.9 no.1
• /
• pp.1-40
• /
• 1985

The transport of cargoes carried by coastal and ocean-going vessels has increased with the rapid growth of the Korean economy these days. This increase of the sea-borne cargoes has made the Korean coastal traffic so congested that this can be a cause of large pollution as well as great marine casualties such as loss of human lives and properties. Marine casualties generally result from the complicated interaction of natural and human factors; the former being the topographic, marine traffic volume and meteorological conditions, and the latter being the quality of seafares. In this paper, the authors analyse the trend of marine casualties in the Korean coastal and clear up the cause of accidents and examine closely the mutual relations among sea accidents, weather conditions, and marine traffic volume. These accidents are classified into several patterns on hte point of view of ship's size, ship's type and ship's age and its characteristics of each pattern are described in detail. Also, the authors estimate the amount of economical losses resulting from marine casualties which are classified into the accident patterns, and clarify the effects of those losses on B/B(Balance Sheet) and P/L(Profit & Loss) of Korean shipping companies and Korean national economy. The analyzed results of marine casualties are summarized as follows: 1) The average number of sea accidents is 248 cases per year with the loss of 107 persons during last 13 years. 2) Collision is the top of causes of sea accidents (approx. 36.4%), shipwreck the second (approx. 20.3%), agroung the third rank (approx. 18.2%). 3) The ship's number under 1, 000G/T is approx. 74% of total ship's number of accidents. 4) 80% of total number of marine accidents is taken plact at the coastal waters. (involved ports & narrow channels) 5) Marine casualties are occur likely to in the night, the winter and the summer. 6) The average amount of economical losses is approx. 18.5 billion won. (approx. 0.14% of GNP) 7) Shipwreck is the top of the amount of economical losses (approx. 60.4%), collision the second (aprox. 24.5%), aground the third (approx. 9.9%). 8) The amount of economical losses is approx. 5.24% of gross capital of shipping co., 1.24% of shipping revenue, 1.38% of shipping total income in 1983.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.490-495
• /
• 2016

In the present study, a microstrip-fed monopole antenna is proposed for wireless local area network (WLAN) operations which cover dual band of 2.4 GHz (2.4 ~ 2.484 GHz) and 5 GHz (5.15 ~ 5.825 GHz). In order to obtain its compact structure and good omnidirectional radiation patterns, a modified inverted L-shaped slot separated from ground for impedance matching in 5 GHz band is etched on 2.4 GHz printed monopole antenna. The proposed antenna is designed and fabricated on a FR4 substrate with dielectric constant 4.3, thickness of 1.6 mm, and size of $30{\times}45mm^2$. The measured impedance bandwidths (${\mid}S_{11}{\mid}{\leq}-10dB$) of fabricated antenna are 270 MHz (2.22 ~ 2.48 GHz) in 2.4 GHz band and 890 MHz (5.08 ~ 5.97 GHz) in 5 GHz band respectively. In particular, high gain of more than about 4 dBi and good omnidirectional radiation patterns have been observed over the entire frequency band of interest.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.6 no.2
• /
• pp.1-15
• /
• 2000

In world trade, the vessel traffic in major routes has been congested due to the rapid increase of cargoes and shipping tonnages. The patterns of vessel traffic have also been complicated and diversified. Therefore it was necessary that the Vessel Traffic Service(VTS) should be established in order to enhance the safety of navigation, to prevent the loss of life and damage to the environment. The first advanced radar surveillance system(LevelIII-VTS) was introduced in Pohang, Korea in 1993 and in 13 other ports later. While the hardware of Korea VTS is equal to that of an advanced country, the software, specially the operation manual, the recruitment and education of VTS operator, and the VTS service area is behind that of Russia, USA, Germany, Hong Kong, Singapore and others. After researching and investigating. the VTS equipment and service area of many countries, and analyzing the IMO regulations relevant to VTS and the traffic pattern and accident of Pohang port, the most efficient VTS service area should be established in Pohang. According to the analysis of the preceding studies and research on VTS, the worldwide VTS areas are recognized under the following conditions: First, the service area should be extended over at least radar coverage taking into account of traffic flow, traffic density, the degree of danger to navigation and harbour condition in order to provide all possible services. Second, the established service area should be subdivided and systematized to render reliable VTS services, such as the allocation of VHF frequency and reporting procedure in each area. In conclusion, the VTS service area of Pohang must be established and operated over 10 miles from shore(radar site) covering the radar coverage, so as to include the area of traffic congestion and high density traffic flow.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.101-107
• /
• 2003

In this study, we provide a single element log-periodic antenna that the feeding networks and array structures are aperture coupled and series dipole array type. We made the antenna for direct receiving the Moogoongwha satellite broadcasting signal. The transmission power was able to feed the patch dipole in series due to lay perpendicularly 8 series patch dipole on tapered slot. The patch dipole radiation pattern which fed in series power, make the main beam direction up $37^{\circ}{\sim}42^{\circ}$ within the BS/CS bandwidth. The main beam gain was measured 9.31~11.03 dBi. Using 32 elements to array the elements properly, we acquire $4{\times}8$ array structure on limited PCB board. As a result, it has been found that the new planar DBS antenna structure have high gain over 10dBi and acceptable elevation angle over 42 degree, and we can apply this result to commercial DBS reception antenna manufacturing.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.250-256
• /
• 2015

Digital load is increasing suddenly for various reasons, such as easy control and management. Accordingly, a consumption pattern of load is becoming DC. However, the power supply is supplied by AC power. The load power supply substantially needs DC power. AC power has to be converted to DC power. Renewable energy sources like solar, wind and fuel cells are DC power generation, but the transfer needs to through by AC power, thus DC power has to be converted to AC power. Resultantly, a multi-stage conversion loss is constantly increasing. The power distribution system of DC-based is required for effective use of these energy sources. This requires a DC load, as well as is necessary to develop DC breaker. This study is expect for system and equipment for reliable DC power distribution through the study of the arc extinguish technology for direct current a hybrid arc extinguishing technology with permanent magnets technology.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.509-513
• /
• 2005

Ship maneuverability is mainly determined according to hull-propeller-rudder system of a ship and directly related to the ship safety during the operation in the ocean. Among hull-propeller-rudder system the rudder system had direct concern with the ship maneuverability and a special rudder has been recommended to improve the ship maneuverability. In this paper the study of flapped rudder's 2-dimensional section was accomplished Model tests had been carried out with different angles of attack of a main foil and flap's deflection angles to predict the performance of the flapped rudder and the 2 frame particle tracking method had been used to obtain the velocity distribution in the flow field during model tests. $Re=1.027{\times}10^4$ had been used during the whole experiments and measured results had been compared with each other.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.1
• /
• pp.1-11
• /
• 1997

Because of the sharp increase of its export and import container cargo volumes contrast to the lack of related Container Terminal facility, equipment and inefficient procedure, there is now heavy container cargo congestions in Pusan Container Terminal. As a result of such a situation, many container ships avoid their calls into Pusan port. This is a major cause that in tum kads to weakening intemational competitiveness of the Korean industry. This study, therefore, aims are to make a quantitative analysis of Container Terminal System through the computer simulation, especially focusing on its 4 sub-system of a handling system, 'it is checked whether the current operation is being performed effectively through the computer simulation. The overall findings are as folIows; Firstly, average tonnage of the ships visiting the BCTOC was 32,360 G/T in from January '96, to may '96. The average arrival interval and service time of container ships at BCTOC are 5.63 hours and 18.67 hours respectively. Ship's arrival and service pattern at BCTOC was exponential distribution with 95% confidence and Erlang-4 distribution with 99% confidence. Secondly, average waiting time and number of ships was 9.9 hours, 235 ships(38%) among 620 ships. Number of stevedoring container per ship was average 747.7 TED, standard deviation 379.1 TEU and normal distribution with 99% confidence. Thirdly, from the fact that the average storage days of containers at BCTOC are 2.75 days (3.0 days when import, 2.5 days when export). it is founds that most containers were transfered to the off-dock storage areas with the free periods(5 days when import, 4 days when export), the reason for which is considered to be the insufficient storage area at BCTOC. Fourthly, in the case of gate in-out at BCTOC, occupied containers and emptied containers are 89% and 11% respectively in the gate-in, 75% and 25% seperately in the gate-out. Finally, from the quantitative analysis results for container terminal at BCTOC, ship's average wating time of ships was found to be 20.77 hours and berth occupancy rate(${\rho}$) was 0.83. 5~6 berths were required in order that the berth occupancy rate(${\rho}$) may be maintained up to 60% degree.