• 연구논문집
• /
• 통권29호
• /
• pp.83-90
• /
• 1999

In naval ships, pump machineries are the major sources of airborne and structure-borne noise. Noise is critical issue in ships not only it causes annoyance to crews, but also it can increase the underwater radiated noise, which is crucial in anti-submarine warfare. In present study, it is discussed the reduction of structure-borne noise of pump machineries by showing several examples. The most typical and effective solution is to use double resilient mount system. However, in cases where double resilient system cannot be applied due to space and weight increase, rubber pad can be used to reduce the structure-borne noise. In principle, the concept of structure-borne noise reduction is the same as that of vibration isolation.

• 대한조선학회논문집
• /
• 제43권6호
• /
• pp.693-699
• /
• 2006

This paper proposes a design optimization technique for ship RCS signature reductions using Taguchi method. The proposed technique comprises of i)evaluating initial RCS signatures, ii)defining critical areas which should be modified as design parameters, and threat factors which can't be controlled artificially as noise parameters, and finally iv)finding optimum parameters via analyzing signal to noise ratios for designated characteristics. We applied the technique to a model ship and found that it is suitable for radar stealth designs. In addition, the proposed technique is applicable to submarine designs against sonar threats.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.94-98
• /
• 2007

The latest development of the submarine oil field and the deep-sea explorer, FPSO is commonly proposed and used for offshore oil production. And because the fundamental requirement of FPSOs to remain moored at their position, they are unable to avoid severe weather and environment. FPSO normally operates head to the weather, and sensitive equipment located the exposed area will be influenced by green water damages, the damages may occur to both onboard equipment and topside structures with resulting risk to personnel. In this paper, the main focus considers the physical structures of green water protector in order to preserve topside structures, equipment and personnel from green water.

• International Journal of Aerospace System Engineering
• /
• 제3권2호
• /
• pp.9-13
• /
• 2016

This study is about technical analysis in launching SLBM of North Korea. We expect that North Korea develop ICBM and SLBM by improving the technique called R-27. Also it is expected that they attempt to achievement in covertness and ambush by completing technique of cold launching. Recently, SLBM of North Korea rised 40 ~ 50 m on surface after launching in an underwater when they showed the scene of firing SLBM. We expect that they actively use not general technique but super cavitation technique. Also, they might improve the launching technique by doing SLBM launching test. This type is about that whole rocket is separated two parts and ignited with high velocity and we might think that 1st rocket is used in solid propellant to maneuver in high velocity in an underwater. After then, they might use liquid propellant for the long-range ballistic missile.

• 한국군사과학기술학회지
• /
• 제22권1호
• /
• pp.42-48
• /
• 2019

Since the underwater telephone was sold in a short time, there are few repair equipments. And equipment is difficult to locate fault. Equipment with transducers must be inspected underwater, and a relative naval vessels is required to perform an operational check. So we developed a tester device to test the transmission card through the spectrum and transmission power, and to develop a device that can conduct operational tests on land. Therefore, the development of the tester reduces the incidence of naval vessels and contributes to the development of domestic underwater communication test equipment.

• 대한조선학회논문집
• /
• 제47권2호
• /
• pp.196-209
• /
• 2010

For the analysis of Acoustic Target Strength(TS) that indicates the scattered acoustic intensity from the underwater vehicles, an analysis program that is applicable to scatterers insonified by spherical wave source in near field is developed. In this program, the Physical Optics(PO) method is embedded as a base component. To increase the accuracy of the program, multiple bounce effects based on Geometrical Optics(GO) method are applied. To implement multiple bounce effects, GO method is used together with PO method. In detail, GO method has a concern in the evaluation of the effective area, and PO method is involved in the calculation of Acoustic Target Strength for the final effective area that is evaluated by GO method. For the embodiment of near field spherical wave source originated multiple bounce effects, image source concept is implemented additively to the existing multiple bounce algorithm which assumes plane wave insonification. Various types of models are tested to evaluate the reliability of the developed program and finally, a submarine is analyzed as an arbitrary scatterer.

• 한국정보통신학회논문지
• /
• 제21권9호
• /
• pp.1808-1817
• /
• 2017

대잠, 대함, 보급 등, 함정에 요구되는 임무가 다양해지면서 함정의 추진체계 또한 임무를 효과적으로 수행하기 위해 ECS(Engineering Control System)를 필요로 한다. ECS는 추진체계를 모니터링하고 제어함으로써 함정이 임무를 수행할 수 있도록 한다. 최근 ECS 국산화 개발이 진행되면서 ECS에 대한 시험 검증을 위한 시스템이 요구되었고, CODOG 기반의 함정 추진체계 시뮬레이터를 개발하였다. CODOG 기반의 함정 추진체계 시뮬레이터는 가스터빈 모델, 디젤엔진 모델, 감속기어 모델, 가변추진기 모델로 나누어 제어 명령에 대한 피드백을 모의한다. 실험 결과, ECS 추진 모드에 따른 가스터빈, 디젤엔진 및 축의 속도, 토크, 출력 등을 확인할 수 있었다.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권1호
• /
• pp.22-27
• /
• 2016

This experimental study deals with the mechanism of spoilers that cause scouring around pipelines. The design methodology was applied to spoilers for accelerating pipelines that undergo self-burial into the sand-bed and evaluated using approaching experimental analysis. The experimental study was conducted to investigate the self-burial ability of submarine pipelines with two types of sand-bed models: silt and sand. Spoilers of different heights were attached to the top of the pipeline for each experiment case. The relationship between the relative scour depth and spoiler height was evaluated by applying different flow velocities and sand diameters and comparative analysis was performed with values obtained from similarity experiments and theory. The experimental study will be useful in establishing a database for the design of spoilers.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.517-524
• /
• 2010

This paper covers the numerical studies performed to investigate the characteristics of turbulent wake generated by a submarine, SUBOFF model. A SUBOFF model assumed as an axial-symmetric body was used to generate wake. The numerical simulation was performed by using a commercial S/W, FLUENT, with the same condition as the experiments by Shin et al.(2009). Mainly the cross-sectional distribution of the time-averaged mean wake and turbulent kinetic energy was compared with the experiments. Both results are agreed well with each other in the propeller wake section, but the agreement between both is not so satisfied in the far wake field. It means that more numerous number of grid points and their concentration should be required in that field.

• 대한조선학회논문집
• /
• 제57권4호
• /
• pp.198-206
• /
• 2020

In this study, the dynamic structural behavior of pressure vessels due to pressure pulse initiated by implosion of neighbouring airbacked equipments including Unmanned Underwater Vehicles (UUV), sensor system, and so on were dealt with for the structural design and safety assessment of pressure hulls of submarine. The dynamic buckling and collapse responses of pressure vessel in deep sea were investigated considering the effects of initial hydrostatic pressure and fluid-structure interactions. The governing equations for circular cylindrical shells were formulated theoretically assuming a relatively simple displacement fields and the derived nonlinear simultaneous ordinary differential equations were analysed by developed numerical solution algorithm. Finally, the introduced safety assessment procedures for the dynamic buckling behaviors of pressure hulls due to implosion pressure pulse were validated by comparing the theoretical analysis results with those of experiments for examples of simple cylinders.