• Journal of Korea Water Resources Association
• /
• v.44 no.2
• /
• pp.109-123
• /
• 2011

In this study, 2D finite volume model, which can apply to the mixed meshes that is effective to treat the complicated topography such as a natural river, is developed. To do so, an algorithm for finding the neighbouring cell of a computational cell is introduced, and fluxes are computed using the HLLC approximate Riemann solver at each interface between a computational cell and it's neighbouring cells. Moreover, in order to numerically treat the bed slope which has important effect on the balance between flux gradients and sourte terms, different formula to compute the bed slope for rectangular and triangular mesh are applied. The developed model is applied to analyze dam-break in an experimental channel with $90^{\circ}$ bend and Malpasset dam-break in France. The two cases consist of mixed meshes and the suggested method is validated for the experimental channel and natural channel by comparison with the experimental data, field data and computed results.

• The Journal of Natural Sciences
• /
• v.13 no.1
• /
• pp.97-111
• /
• 2003

This study aims at presenting the planning parameter of ski course by designing Gapyung ski course. This site is located at Hacheon-ri, Gapyung-gun, Kyunggi-do and has an area $1,594,001m^2$. Design objectives of Gapyung Ski Resort were to build the most suitable ski course on the site area and make a comparative ski resort. This design process covers the following : site inventory and analysis; integration of design program and terrain analysis; slope planning and trail balance; comparison with other ski resort. This ski resort was composed of 5 lifts and 10 ski trails which are divided into 2 intermediate course, 3 high intermediate course, 4 advanced course, and I expert course. Total length of slope distance is 8,738m. This ski resort will be developed for advanced skiers and snow boarders who enjoy a mogul and a half pipe course. Therefore, the strategy of this ski resort is marked for target market of high intermediate.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.651-656
• /
• 2002

In general, the most important problem in slope stability analysis is that there is no definite way to describe the natural three-dimensional Joint network. Therefore, the many approaches were tried to anlayze the slope stability. Numerical modeling approach is one of the branch to resolve the complexity of natural system. UDEC, FLAC, and SWEDGE are widely used commercial code for the purpose on stability analysis. For the purpose on the more appropriate application of these kind of code, however, three-dimensional distribution of joint network must be identified in more explicit way. Remaining problem is to definitely describe the three dimensional network of joint and bedding, but it is almost impossible in practical sense. Three dimensional joint generation method with random number generation and the results of generation to UDEC have been applied to settle the refered problems in field site. However, this approach also has a important problem, and it is that joint network is generated only once. This problem lead to the limitation on the application to field case, in practical sense. To get rid of this limitation, Monte Carlo Simulation is proposed in this study 1) statistical analysis of input values and definition of the applied system with statistical parameter, 2) instead of the consideration of generated network as a real system, generated system is just taken as one reliable system, 3) present the design parameters, through the statistical analysis of ouput values Results of this study are not only the probability of failure, but also area of failure block, shear strength, normal strength and failure pattern, and all of these results are described in statistical parameters. The results of this study, shear strength, failure area, pattern etc, can provide the direct basement on the design, cutoff angle, support pattern, support strength and etc.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.199-206
• /
• 2001

Landslides generally occur due to influences of the internal and external factors. Internal factors include ground characteristics, terrain and so on. External factors can also be divided into natural factors such as rainfall, ground water, earthquake and so on, and artificial factors resulting from cutting and embankments. Among these factors, rainfall becomes the most important external factors by means of which landslides occur in Korea. To appropriately deal with tile effects of pore water pressures due to rainfall, the method using the pore water pressure ratio(r$\_$u/) is generally applied in slope stability analysis or the design of slope reinforcements. Since tire value of r,, is in general not constant over the whole cross section, in most slope stability analyses the average values are used with little loss in accuracy. However, determination of the average values of r$\_$u/ to applied in the design is difficult problem. Therefore, in this study, tile average values of r$\_$u/ according to the intensity of rainfall and slope inclination is suggested based on results of the small scaled model tests using the artificial rainfall apparatus. It is found from the model tests that the average values of r$\_$u/ is about 0.07∼0.18(in case of the intensity of rainfall is 50mm/hr.), about 0.10∼0.28(in case of the intensity of rainfall is 100mm/hr.), and about 0.10∼0.33(in case of the intensity of rainfall is 150mm/hr.).

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.258-266
• /
• 2019

This study was conducted to apply natural river technologies to levees and examine the results. The new eco-friendly bio-polymer was applied, a combination of eco-friendly biopolymers and soil, to levee slope to enhance durability and eco-friendliness and to establish reinforcement measures against unstable levees due to overtopping. A semi-prototype levee of 1 m in height, 3 m in width, with a 1:2 slope and 5 m length, was constructed at the Andong River Experiment Center. The bio-soil mixed with the biopolymer and the soil at an appropriate ratio was treated with a 5 cm thickness on the surface of levee to perform the stability evaluation according to overtopping. Using the pixel-based analysis technique using the image analysis program, the breached area of levee slope was calculated over time. As a result, the time for complete decay occurs more than 12 times than that of ordinary soil levee. Therefore, when the new substance is applied to the surface of levee, the decay delay effect appears to be high.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.6
• /
• pp.569-579
• /
• 2016

In order to ensure the stability of tunnel portal slope, reinforcement method such as anchors, soil nails and rock bolts have been used in Korea. When selecting slope reinforcement methods in tunnel portal area such as reinforcement arrangement and length, trial and error method can be very time-consuming and it was also not easy to verify the selection of an optimum condition. In this study, using the FISH language embedded in the finite difference code FLAC3D program, the optimization technique was developed with the Differential Evolution Algorithm (DEA). After building a database on the soil nailing method in tunnel portal area, this system can be selected to an optimum arrangement plan based on the factor of safety through the FLAC3D analysis. Through the results of numerical analysis, it was confirmed that the number of analysis was decreased by about 8 times when DEA based optimization technique was used compared to the full combination (FC). In case of the design of slope reinforcement in tunnel portal area, if this built-system is used, it is expected that the selection of an optimum arrangement plan can be relatively easier.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.12
• /
• pp.27-34
• /
• 2016

Many steepened slopes have become increasingly advantageous because of the desire to increase land usage and decrease site development costs. The proven concept of tensile reinforcement allows construction of slopes with far steeper face angles than the soils natural angle. Steepened slope face reinforced with improved soil can increase land usage substantially while providing a natural appearance. The paper presents composite reinforced earth with improved soil surface and geogrid-reinforced backfill. For the stability of the steepened slope, the behavior of the composite reinforced earth are validated and verified by case study and numerical analysis. The case study has performed to investigate the deformation of reinforce soil slope for 14 months. Its horizontal behavior by general vertical load shows within the safe range (0.5% of structure height). As a result of numerical analysis and case study, the reinforcement effect of the steepened slope technique using improved soil is sufficient to be constructed as reinforced soil slope.

• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.350-357
• /
• 2006

For the purpose of this study, the characteristics of surface flow through the survey of rainfall intensity and degree of slope on fire sites by using rainfall simulator was examined and analysed. And also the relationship between the amount of surface flow and rainfall intensity, degree of slope and elapsed year after forest fire occurrence influencing on the surface flow were analysed. The results obtained were as follows: 1. The amount of surface flow by year of occurrence of forest fire was increased 2,2 to 3,2 times as rainfall intensity was increased by 30 mm/hr, and 1.5 to 1.9 times as degree of slope was increased by $10^{\circ}$, 2, Even though ground vegetation in forest fire sites was recovered more than 80%, the amount of surface flow in initial rainfall was relatively much and it seemed that vegetation didn't play substantial roles in reducing runoff. 3, The amount of surface flow by rainfall intensity and degree of slope in accordance with elapsed years after forest fire was reduced 22,3% to 41,8% in three years after fire as compared to the first year of fire occurrence. The amount of surface flow were significantly differentiated by rainfall intensity and degree of slope in the first year of fire occurrence and the difference were gradually reduced afterwards. 4. In the analysis on influences of each factors on the amount of surface flow on forest fire sites, the amount of surface flow was significant differences in major impacts of each rainfall intensity, degree of slope and elapsed year after fire and interaction of rainfall intensity ${\times}$ degree of slope and rainfall intensity ${\times}$ elapsed year after fire, but no differences were observed in interaction of degree of slope ${\times}$ elapsed year after tire and rainfall intensity ${\times}$ degree of slope ${\times}$ elapsed year after tire. Rainfall intensity was the most affecting factor on the amount of surface flow and followed by degree of slope and elapsed year after fire.

• Journal of People, Plants, and Environment
• /
• v.22 no.3
• /
• pp.299-307
• /
• 2019

This study surveyed the general characteristics and forest use characteristics of forest visitors, the healing power of natural environments and Perceived Restorativeness Scale (PRS) to find out whether humans can feel the healing effects of natural environments. The target area of this study was the natural environments of Bunseong Mountain in Gimhae, Gyeongsangnam-do, Korea. A total of 50 questionnaires were analyzed. Female visitors and those aged between 40s to 60s accounted for 62% and over 70% respectively. All the surveyed respondents answered 'yes' to the question about the healing effects of Bunseong Mountain and natural environments, and 84% of them answered that they can get 'psychological and physical healing' in Bunseong Mountain. Many respondents chose oxygen, sunlight, and landscape as a healing factor. To the questions about the specific form or conditions of the natural environments that have the healing effects, those who answered 'forest' was the highest (72%), and they described thickness of forests, gentle slope and clean air as their conditions. The average score of the Perceived Restorativeness Scale (PRS) using a 7-point Likert scale was 5.14. The results of this study indicate that respondents perceive Bunseong Mountain as a restorative environment and think that they can enjoy the healing effects of Bunseong Mountain and natural environments.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.1
• /
• pp.92-103
• /
• 2004

This design was submitted to an invited competition for the Ski Resort of Kangwon Land which was held by Kangwon Land Resort in August, 2003. The site is located at 1∼17 Gohan-ri Gohan-eup Jungsungun Kangwon-do and has an area of 5,000,000$m^2$. The objectives of this project were to revitalize the local economy of Sabuk, Gohan which is well Down for deserted coal mines, by creating a resort complex for family group users with an environmentally friendly ski facility. This design scheme addresses three areas of concerns: First, how to boost the local economy through the proposed ski resort. By limiting lodging facilities in the ski resort, we could induce more development in the nearby towns. In order to balance the economical benefit to towns of Sabuk and Gohan, we decided to have two separate ski base facilities in each town boundary. Second, how to encourage family-oriented use of the ski resort by designing user-friendly ski slope, especially for beginner skiers. We designed 50% more beginner-level ski slope compared to average ski resorts. Third, how to make environmentally-friendly ski resort by respecting the original land form. We minimized the damage to the natural environment by protecting valuable tree groves. Also, ski slopes are designed to reduce unnecessary earth movement. This was designed under the assumption that more valley-oriented slopes would result in less cutting and banking of earthwork； this assumption was verified in comparison with other ski resorts. It is expected that this desist would serve environmentally-friendly designs in ski slopes.