• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1011-1016
• /
• 2004

All the loads in the real world are dynamic loads and it is well known that structural optimization under dynamic loads is very difficult. Thus the dynamic loads are often transformed to the static loads using dynamic factors. However, due to the difference of load characters, there can be considerable differences between the results from static and dynamic analyses. When the natural frequency of a structure is high, the dynamic analysis result is similar to that of static analysis due to the small inertia effect on the behavior of the structure. However, if the natural frequency is low, the inertia effect should not be ignored. Then, the behavior of the dynamic system is different from that of the static system. The difference of the two cases can be explained from the relationship between the homogeneous and the particular solutions of the differential equation that governs the behavior of the structure. Through various examples, the difference between the dynamic analysis and the static analysis are shown. Also the optimization results considering dynamic loads are compared with static loads.

• 품질경영학회지
• /
• 제46권3호
• /
• pp.641-650
• /
• 2018

Purpose: This article provides a cause of breakage and a method for improving reliability of the headlight system installed in the main battle tank K2. Method: The natural frequency of the headlight system is estimated by using the finite element method. In addition, the allowable stress level under the severe conditions is provided through vibration test of a single item and a system level. Results: Based on the finite element analysis and the vibration test in the frequency domain, the lamp of the left headlight system fails by the resonance effect. Conclusion: For improving the reliability of the headlight system, the thickness of protector frame is increased to avoid the resonance effect.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.385-396
• /
• 1989

본 논문에서는 차륜과 레일의 접촉부에서 발생하는 크리프힘과 크리프모멘트 를 결합시키고 이들이 병진스프링과 비틀림스프핑에 의해서 연성되었을때 생기는 고유진동수의 특성을 차륜과 레일의 직교성을 이용하여 수치해석하고 모델실험을 통하여 연구하였다.

• 대한조선학회논문집
• /
• 제50권4호
• /
• pp.224-231
• /
• 2013

The concept of the natural frequency is useful for understanding the characters of oscillating systems. However, when a circular cylinder floating horizontally on the water surface is heaving, due to the hydrodynamic forces, the system is not governed by the equation like that of the harmonic one. In this paper, in order to shed some lights on the more correct use of the concept of the natural frequency, a problem of the heaving circular cylinder is analyzed in the time domain. The equation of motion, an integro-differential equation, was derived following the fashion of Cummins (1962), and its coefficients including the retardation function were obtained using the numerical solution of Lee (2012). The equation was solved numerically, and the experiment was also carried out in the CNU flume. Using our numerical and experimental results, the natural frequency was defined as its average value given by the motion data excluding those of the initial stage. Our results were then compared with those of the existing investigations such as Maskell and Ursell (1970), Ito (1977) and Yeung (1982) as well as the newly obtained results of Lee (2012). Comparison showed that the natural frequency obtained here agrees well with that of Lee (2012), which was found through the frequency domain analysis. It was also shown that the approximation of heaving motion by a damped harmonic oscillation, which was regarded as suitable by most previous investigators, is not physically suitable for the reason that can be clearly shown through comparing the shape of MCFRs(Modulus of Complex Frequency Response). Furthermore, we found that although the previous approximations yield the damping ratio significantly different from our result the magnitude of natural frequency is not much different from our result.

• 한국지반공학회논문집
• /
• 제33권7호
• /
• pp.17-28
• /
• 2017

본 연구에서는 건조사질토 지반에 근입된 말뚝의 동적 거동을 분석하기 위해 1g 진동대 실험을 수행하였다. 지반-말뚝 시스템의 고유 진동수를 측정한 후 고유 진동수를 기반으로 하중 진동수를 산정하고 이에 대한 거동을 분석하였다. 또한, 추가적으로 말뚝의 동적 거동에 영향을 미치는 인자를 분석하기 위하여 입력 가속도, 상부하중, 말뚝 두부 구속 조건에 따른 거동을 분석하였다. 분석결과, 하중 진동수가 지반-말뚝 시스템의 고유 진동수보다 큰 경우 상대적으로 말뚝 두부변위와 휨모멘트가 크게 발생하고 동적 p-y 곡선의 기울기가 작게 나타났다. 또한, 동적 p-y 곡선의 영향인자를 분석한 결과, 말뚝 두부구속조건은 동적 p-y 곡선의 기울기에 영향을 적게 끼침을 확인하였고, 입력가속도, 상부하중 등의 의한 관성력, 지반-말뚝 시스템의 고유 진동수와 입력 진동수의 관계 그리고 지반조건이 동적 p-y 곡선의 기울기에 큰 영향을 끼치는 것으로 확인되었다.

• 대한조선학회논문집
• /
• 제55권4호
• /
• pp.321-329
• /
• 2018

Resonance phenomena occurs at large vertical pump which is operating to cool down the hot steam using sea water in the power plant. To avoid the resonance, the natural frequency needs to be isolated about 20% from motor operating speed. Yet, excessive vibration occurs especially at low tide. At first, natural frequency of the whole pump system and each part is calculated using ANSYS. As it is revealed in the previous journal papers that only circular pipe part is related to resonance, the FSI technique is applied for free vibration analysis. The natural frequency is reduced to 60% (compared to that) of the frequency measured in air as it is similar to other published results. And the frequency obtained by finite element analysis is almost same to that obtained from modal test. Based on the accurate finite element model and analysis, design change is tried to avoid the resonance by changing the thickness of pipe and base supporting plate. In stead of doing optimization process, design sensitivity is computed and used to find such designs to avoid resonance.

• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.8-14
• /
• 2001

We develop a method to analyze dynamic behavior off multi-stage gear train system. The example system consists of three shafts supported by ball bearings at the ends of them and two pairs of spur gear set. For exact analysis, the meshing tooth pair of gear set is modeled as spring and damper having time-dependent meshing stiffness and damping. The bearing is modeled as spring. The result of this analysis is compared to that of other model having mean mesh stiffness. The effect of the excitation force by the unbalance off rotor off motor is also analyzed. Finally, the change ova natural frequency of the whole system due to the change of an angle between three shafts is compared in each case, and from this analysis, the avoiding angle for design is advised.

• 한국산학기술학회논문지
• /
• 제11권12호
• /
• pp.4735-4741
• /
• 2010

초음파 금속 용착은 신소재, 도금 구조물 등과 같은 다양한 재료의 용착에 대한 가능성 때문에 광범위한 분야에서 사용되고 있으며 용착 조건도 다양하다. 본 연구에서는, 이종 금속 박판의 초음파 금속 용착을 위해 설계된 단부가형 한파장 혼은 유한요소해석 하였다. 유한유소해석은 초음파 혼의 최적 설계와 초음파 공구혼의 고유 주파수를 예상하기 위해 사용되었다. 그리고 설계된 한파장 스텝 혼은 고유 주파수 분석 시스템을 사용하여 실험적으로 검증하였다.

• 한국안전학회지
• /
• 제15권3호
• /
• pp.45-51
• /
• 2000

This paper studies the effect of vibrational characteristics of the various tubes analyzed though experiment. By an experiment analysis we found out that the factor of system vibration is fluid-structure interaction of tube line. In fluid-filled tube system we study on the influence that the natural frequency of system and the frequency of wave motion produce upon through three experiments. Three experiments are modal test on each tube, FRF in continuous system, and vibrating tests when the system is driving on. From the results of the experimental studies, we obtained that the natural frequencies of system are very important than wave induced vibrations. and according to the variation of configuration, the frequencies are different each other. And we found that though fluid passed away through the tube, the tendency of system vibration level was similar with the mode shape at the simple system.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1397-1402
• /
• 2013

This study researched cause of resonance noise for BLDC motor used in the refrigerator. it is difficult to measure dynamic characteristics for small sized fan & rotor system with conventional excitation method. Therefore this study performed electric exiting method and natural frequency method using microphone instead of conventional excitation and showed validity of these methods. Study result showed that tortional vibration frequency of fan & rotor system and natural bending frequency of the fan were matched with exciting frequency of BLDC motor caused by commutating ripple torque. And this frequency match caused resonance of the system. The study analyzed main parameters of this phenomenon and suggested alternative solution.