• 설비공학논문집
• /
• 제4권4호
• /
• pp.323-331
• /
• 1992

A two-dimensional Benard-convection system with a phase-change material inside has been analysed. The main purpose of the present study is to clarify the basic reason of the hysteresis found by the previous investigators. The interface between the solid and the liquid is assumed to be planar. The analysis was performed with heat transfer rates under the steady state on the interface. It was found that the hysteresis occurs due to the abrupt increase in the heat transfer rate at the onset of natural convection in the classical Benard-convection system. The spectral method was applied to obtain the steady solution of the natural convection for the specific material and to confirm the hysteresis phenomenon.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제6권1호
• /
• pp.33-43
• /
• 2001

본 연구에서는 지하수위 변동 곡선을 이용하여 지하수 함양률을 추정하는 기법을 제안하였으며 무강우 기간 지하수위 감수곡선을 이용한 기존의 방법과 비교하였다. 본 연구는 전국 지하수 함양률을 추정하기 위한 연구의 일환으로서 국가 지하수 관측망의 신뢰성 높은 지하수위 자료를 이용하였고 자료가 충실한 세 지역(충주, 진주, 광주)에 대하여 본 방법론을 적용하였다. 이를 위하여 각 지역의 지하수위에 대한 계절적 변동 분석, 지하 수위와 누적 강수량에 대한 시차분석, 지하수 함양률 비교 연구 분석 등을 실시하였다.

• 복식
• /
• 제27권
• /
• pp.53-74
• /
• 1996

The Doryon-Line is the lowest line of the Chechori and Dangeu and the length of the Chechori and the Dangeu have wide influence on the Doryon-Line. Also the change of the Doryon-Line is re-lated to the proportion the length the depth that is the curved proportion and the two curved proportion 0.04 and 0.13 are related to the roof style of the traditional architecture in Chosun Dynasty. The Chosun people have made a change the Doryon-Line monotonous in the 14C-15C but the Doryon-Line have been full of variety every fifty years in the 15C-18C. Especially Chosun people have been at war in the mountains and fields in the Doryon-Line are 0.06 and 0.07 in this period I think that the curved proportion 0.06 and 0.07 are symbolized the natural beauty in the mountains and trees of the Korea.

• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.8-14
• /
• 2001

We develop a method to analyze dynamic behavior off multi-stage gear train system. The example system consists of three shafts supported by ball bearings at the ends of them and two pairs of spur gear set. For exact analysis, the meshing tooth pair of gear set is modeled as spring and damper having time-dependent meshing stiffness and damping. The bearing is modeled as spring. The result of this analysis is compared to that of other model having mean mesh stiffness. The effect of the excitation force by the unbalance off rotor off motor is also analyzed. Finally, the change ova natural frequency of the whole system due to the change of an angle between three shafts is compared in each case, and from this analysis, the avoiding angle for design is advised.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2015년도 하계 학술발표논문집
• /
• pp.89-93
• /
• 2015

• 한국분무공학회지
• /
• 제27권1호
• /
• pp.36-41
• /
• 2022

In this study, the combustion instability characteristics according to the change in the hydrogen ratio in the fuel in the single nozzle system of the hydrogen-natural gas mixed gas turbine for power generation was analyzed using a three-dimensional finite element analysis-based Helmholtz solver. This combustor shows the instability characteristics in which mode transition occurs from a mode having a low amplitude near 70 Hz to a mode having a high amplitude of 250 Hz or higher as the hydrogen fraction in the fuel increases. The current modeling results are found to reasonably predict the main characteristics of the change in measured instability frequency and growth rate with the change in fuel composition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.923-924
• /
• 2012

• 환경영향평가
• /
• 제22권1호
• /
• pp.109-116
• /
• 2013

By IPCC climate change scenario, the socioeconomic actions such as the land use change are closely associated with the climate change as an up zoning action of urban development to increase green gas emission to atmosphere. Prediction of the land use change with rational quality can provide better data for understanding of the climate change in future. This study aims to predict land use change of Cheongju in future and SLEUTH model is used to anticipate with the status quo condition, in which the pattern of land use change in future follows the chronical tendency of land use change during last 25 years. From 40 years prediction since 2000 year, the area urbanized compared with 2000 year increases up to 87.8% in 2040 year. The ratios of the area urbanized from agricultural area and natural area in 2040 are decreased to 53.1% and 15.3%, respectively.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.170-177
• /
• 1999

The natural period calculation equations specified in the current building code are empirical formulas that depend on height and material type of the structure. Building with the upper wall and lower frame type is a unique structure which composed of two different structural system This type of structure needs either the deep transfer girder or the thick transfer plate that brings the sudden change of stiffness and mass. Therefore the natural period equations recommended by the current code can not be applied directly. In this study the natural period of building with typical plan obtained by dynamci analysis is compared with that of various codes. Ad approximate estimation equation for the natural period of building with the upper wall and lower frame type obtained by regression analysis is recommended. by the current code can not be applied directly. In this study the natural period of building with typical plan obtained by dynamic analysis is compared with that of various codes, And approximate estimation equation for the natural period of building with the upper wall and lower frame type obtained by regression analysis is recommended.

• 한국전기전자재료학회논문지
• /
• 제24권11호
• /
• pp.865-869
• /
• 2011

A cantilever-type piezoelectric generator has advantages of simple structure, ease of fabrication and large displacement by transverse vibration of a beam. It is easy to control the natural frequency, and also possible to increase the output power by changing the length, width, and thickness of the generator. In particular, the length increases, the natural frequency sharply decreases, and vice versa. Hence, the natural frequency can widely be controlled by using change in the length of elastic body. In this paper, the generator was designed and fabricated to change natural frequency using the slides of the case. In addition, the generating characteristics were confirmed through finite element analyses and vibration experiment. As a result, the maximum output characteristics could be generated due to resonance phenomenon although any frequency of external force was applied.