• Title/Summary/Keyword: Natural change

Search Result 3,858, Processing Time 0.05 seconds

Heat Transfer with Phase Change between Two Isothermal Horizontal Plates (두 등온 수평 평판 사이의 상변화 열전달)

  • Suh, Y.K.
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.4 no.4
    • /
    • pp.323-331
    • /
    • 1992
  • A two-dimensional Benard-convection system with a phase-change material inside has been analysed. The main purpose of the present study is to clarify the basic reason of the hysteresis found by the previous investigators. The interface between the solid and the liquid is assumed to be planar. The analysis was performed with heat transfer rates under the steady state on the interface. It was found that the hysteresis occurs due to the abrupt increase in the heat transfer rate at the onset of natural convection in the classical Benard-convection system. The spectral method was applied to obtain the steady solution of the natural convection for the specific material and to confirm the hysteresis phenomenon.

  • PDF

Estimation of Groundwater Recharge Ratio Using Cumulative Precipitation and Water-level Change (누적 강수량과 지하수위 곡선을 이용한 지하수 함양률 추정 기법)

  • 문상기;우남칠
    • Journal of Soil and Groundwater Environment
    • /
    • v.6 no.1
    • /
    • pp.33-43
    • /
    • 2001
  • A calculation technique which estimates natural recharge using groundwater level change was proposed and prepared with the existing techniques using groundwater recession curve during dry days. As a part of estimating natural groundwater recharge nation wide, the reliable data from the national groundwater monitoring network were used and the methodology was applied to the three sites which have enough data (Chungju, Jinju and Kwangju). For this study, seasonal variation of groundwater level change, an analysis of lagging time on groundwater level and cumulative precipitation, and a comparative study for groundwater recharge were conducted.

  • PDF

A Study on the Style change of the Doryon-Line of the Chogori and the Dangeu in the Chosun dynasty-On the natural beauty theory and the roof style of the traditional architecture- (조선시대의 저고리와 당의의 도련선 양식 변화에 관한 연구-전통 건축양식중 지붕양식과 자연미 이론을 중심으로-)

  • 유은희
    • Journal of the Korean Society of Costume
    • /
    • v.27
    • /
    • pp.53-74
    • /
    • 1996
  • The Doryon-Line is the lowest line of the Chechori and Dangeu and the length of the Chechori and the Dangeu have wide influence on the Doryon-Line. Also the change of the Doryon-Line is re-lated to the proportion the length the depth that is the curved proportion and the two curved proportion 0.04 and 0.13 are related to the roof style of the traditional architecture in Chosun Dynasty. The Chosun people have made a change the Doryon-Line monotonous in the 14C-15C but the Doryon-Line have been full of variety every fifty years in the 15C-18C. Especially Chosun people have been at war in the mountains and fields in the Doryon-Line are 0.06 and 0.07 in this period I think that the curved proportion 0.06 and 0.07 are symbolized the natural beauty in the mountains and trees of the Korea.

  • PDF

A Study on the Vibration of 2-Stage Gear System Considering the Change of Gear Meshing Stiffness and Imbalance of Motor (기어 물림부의 스프링강성 변화와 구동기의 불균형을 고려한 2단 기어장치의 진동에 관한 연구)

  • 정태형;이정상;최정락
    • Transactions of the Korean Society of Machine Tool Engineers
    • /
    • v.10 no.6
    • /
    • pp.8-14
    • /
    • 2001
  • We develop a method to analyze dynamic behavior off multi-stage gear train system. The example system consists of three shafts supported by ball bearings at the ends of them and two pairs of spur gear set. For exact analysis, the meshing tooth pair of gear set is modeled as spring and damper having time-dependent meshing stiffness and damping. The bearing is modeled as spring. The result of this analysis is compared to that of other model having mean mesh stiffness. The effect of the excitation force by the unbalance off rotor off motor is also analyzed. Finally, the change ova natural frequency of the whole system due to the change of an angle between three shafts is compared in each case, and from this analysis, the avoiding angle for design is advised.

  • PDF

Combustion Instability Modeling in a Hydrogen-Natural Gas Mixed Fuel Gas Turbine Combustor using a 3-Dimensional Finite Element Method Approach (3차원 유한요소해석 기법을 사용한 수소-천연가스 혼소 가스터빈 연소기에서의 연소불안정 해석)

  • Hong, Sumin;Kim, Daesik
    • Journal of ILASS-Korea
    • /
    • v.27 no.1
    • /
    • pp.36-41
    • /
    • 2022
  • In this study, the combustion instability characteristics according to the change in the hydrogen ratio in the fuel in the single nozzle system of the hydrogen-natural gas mixed gas turbine for power generation was analyzed using a three-dimensional finite element analysis-based Helmholtz solver. This combustor shows the instability characteristics in which mode transition occurs from a mode having a low amplitude near 70 Hz to a mode having a high amplitude of 250 Hz or higher as the hydrogen fraction in the fuel increases. The current modeling results are found to reasonably predict the main characteristics of the change in measured instability frequency and growth rate with the change in fuel composition.

Land Use Change Prediction of Cheongju using SLEUTH Model (SLEUTH 모델을 이용한 청주시 토지이용변화 예측)

  • Park, In-Hyeok;Ha, Sung-Ryong
    • Journal of Environmental Impact Assessment
    • /
    • v.22 no.1
    • /
    • pp.109-116
    • /
    • 2013
  • By IPCC climate change scenario, the socioeconomic actions such as the land use change are closely associated with the climate change as an up zoning action of urban development to increase green gas emission to atmosphere. Prediction of the land use change with rational quality can provide better data for understanding of the climate change in future. This study aims to predict land use change of Cheongju in future and SLEUTH model is used to anticipate with the status quo condition, in which the pattern of land use change in future follows the chronical tendency of land use change during last 25 years. From 40 years prediction since 2000 year, the area urbanized compared with 2000 year increases up to 87.8% in 2040 year. The ratios of the area urbanized from agricultural area and natural area in 2040 are decreased to 53.1% and 15.3%, respectively.

A Study on the Natural Period Estimation for the Buildings of Upper Wall and Lower Frame Type (상부벽식-하부골조를 가진 복합구조물의고유주기 산정에 관한 연구)

  • 박기수
    • Proceedings of the Earthquake Engineering Society of Korea Conference
    • /
    • 1999.10a
    • /
    • pp.170-177
    • /
    • 1999
  • The natural period calculation equations specified in the current building code are empirical formulas that depend on height and material type of the structure. Building with the upper wall and lower frame type is a unique structure which composed of two different structural system This type of structure needs either the deep transfer girder or the thick transfer plate that brings the sudden change of stiffness and mass. Therefore the natural period equations recommended by the current code can not be applied directly. In this study the natural period of building with typical plan obtained by dynamci analysis is compared with that of various codes. Ad approximate estimation equation for the natural period of building with the upper wall and lower frame type obtained by regression analysis is recommended. by the current code can not be applied directly. In this study the natural period of building with typical plan obtained by dynamic analysis is compared with that of various codes, And approximate estimation equation for the natural period of building with the upper wall and lower frame type obtained by regression analysis is recommended.

  • PDF

Generating Characteristics of a Cantilever Type Piezoelectric Generator for Changeable Frequency (주파수 가변용 외팔보형 압전발전기의 발전특성)

  • Jeong, Seong-Su;Park, Choong-Hyo;Kang, Shin-Chul;Kim, Jong-Wook;Lim, Jung-Hoon;Kim, Myong-Ho;Park, Tae-Gone
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.24 no.11
    • /
    • pp.865-869
    • /
    • 2011
  • A cantilever-type piezoelectric generator has advantages of simple structure, ease of fabrication and large displacement by transverse vibration of a beam. It is easy to control the natural frequency, and also possible to increase the output power by changing the length, width, and thickness of the generator. In particular, the length increases, the natural frequency sharply decreases, and vice versa. Hence, the natural frequency can widely be controlled by using change in the length of elastic body. In this paper, the generator was designed and fabricated to change natural frequency using the slides of the case. In addition, the generating characteristics were confirmed through finite element analyses and vibration experiment. As a result, the maximum output characteristics could be generated due to resonance phenomenon although any frequency of external force was applied.