• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.5
• /
• pp.445-452
• /
• 2009

In this paper, damage detection procedure using the finite element model updating was formulated and applied to a small-scale frame structure. FE model updating is the analytical method which finds the mathematical model that generates the measured dynamic properties similarly, and can be effectively used for the damage detection and SHM. For model updating, several kinds of dynamic properties, such as the natural frequencies, mode shapes, and frequency response functions, can be used as the inputs. In this paper, two kinds of model updating procedures using the natrual frequency and the frequency response function, and the natrual frequency and the mode shapes, respectively, were applied to identify the location and the severity of damage of the test structure, which is a four-story two bay steel structure. Results from the damage detection showed that more accurate identification results was obtained when the natrual frequency and the frequency response function were used than when the natrual frequency and the mode shapes were used.

• Journal of Ecology and Environment
• /
• v.34 no.2
• /
• pp.237-249
• /
• 2011

Land-use changes due to the socio-economic environment influence landscape patterns and processes, which affect habitats and biodiversity. This study considers the effects of such land-use changes, particularly on the traditional rural "Maeul" forested landscape, by analyzing landscape structure and vegetation changes. Three study areas were examined that have seen their populations decrease and age over the last few decades. Five types of plant life-forms (Raunkier life-forms) were distinguished to investigate ecosystem function. Principle component analysis was used to understand vegetation dynamics and community characteristics based on a vegetation similarity index. Ordination analysis transformed species-coverage data was introduced to clarify vegetation dynamics. Landscape indices, such as area metrics, edge metrics, and shape metrics, showed that spatial heterogeneity has increased over time in all areas. Pinus densiflora was the main land-use plant type in all study areas but decreased over time, whereas Quercus spp. increased. Over a decade, P. densiflora communities shifted to deciduous oak and plantation. These findings indicate that the impact of human activities on the Maeul landscape is twofold. While forestry activities caused heavy disturbances, the abandonment of traditional human activities has led to natural succession. Furthermore, it can be concluded that the type and intensity of these human impacts on landscape heterogeneity relate differently to vegetation succession. This reflects the cause and consequence of patch dynamics. We discuss an approach for sustainable landscape planning and management of the Maeul landscape based on traditional management.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.139-145
• /
• 1996

The machining accuracy and performance is largely influenced by the static, dynamic and thermal characteristics of spindle systems in machine tools, because the spindle system is a intermedium for cutting force from tool and machine powef from motor. Large cutting force and power are transmitted by bearing with a point or line contact. So, the spindle system is the static and dynamic weakest point in machine structure. For improvement of static stiffness of spindle system can be changed design parameters, such as diameter of spindle, stiffness of bearing and bearing span. But for dynamic stiffness, the change of the design parameters are not useful. In this paper, the combined bearing arrangement is suggested for high damping spindle system. The combined bearing arrangement is composed of tandem double back to back arrangement type ball bearins and a high damping hydrostatic bearing. The variation of static deflection and amplitude in first natural frequency is evaluated with the location of hydrostatic bearing between front and rear ball bearing. The optimized location of hydrostatic bearing for high static and dynamic stiffness is determined rapidly and exactly using the mode shape and transfer function of spindle. The calculation of damping effect on vibration by unbalance of grinding wheel and pulley in optimized spindle system is carried out to verify the validity of the combined bearing arrangement. Finally, the simulation of grinding process show that the surface roughness of workpiece with high damping spindle system is 60% better than with ball bearing spindle system.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.69-72
• /
• 2004

A new three-node triangular shell element based on higher order zig-zag theory is developed for laminated composite shells with multiple delaminations. The present higher order zig-zag shell theory is described in a general curvilinear coordinate system and in general tensor notation. All the complicated curvatures of surface including twisting curvatures can be described in an exact manner in the present shell element because this element is based on geometrically exact surface representation. The displacement field of the proposed finite element includes slope of deflection, which requires continuity between element interfaces. Thus the nonconforming shape function of Specht's three-node triangular plate bending element is employed to interpolate out-of-plane displacement. The present element passes the bending and twisting patch tests in flat surface configurations. The developed element is evaluated through the eigenvalue problems of composite cylindrical shells with multiple delaminations. Through the numerical examples it is demonstrated that the proposed shell element is efficient because it has minimal degrees of freedom per node. The present shell element should serve as a powerful tool in the prediction of natural frequency and modes of multi-layered thick laminated shell structures with arbitrary-shaped multiple delaminations.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.852-858
• /
• 2007

The durability of carbon/epoxy composites under salt water environment was investigated through salt water spray tester. Salt water environment was obtained through salt spray and salt immersion. 5% NaCl solution was used for salt water as natural salt water. Mechanical test was performed to obtain tensile properties, flexural properties, and shear properties of carbon/epoxy composite over 12 months under salt water environment. Dynamic mechanical analyzer was used to investigate thermal analysis properties such storage modulus, loss modulus, and tan ${\delta}$. Also FT/IR test was conducted to investigate a change in chemical structure. According to the results, mechanical properties were found to be slowly degraded as a function of exposure times. Regarding to thermal analysis properties, storage modulus was insensitive to exposure times, but loss modulus was shown to be slightly decreased. Although the shape and location of peak in FT/IR were not much changed, the intensity of peak in FT/IR was affected on exposure times. We also found that salt water immersion was more severe to the durability of carbon/epoxy composite rather than salt water spray.

• Water for future
• /
• v.18 no.1
• /
• pp.85-94
• /
• 1985

A method is developed for the separation of the major base flow in a river hydrograph combining the numerical techniques and the empirical methods. The linearized Boussinesq equation and the storage function are used to obtain the base flow recession. The shape of base flow curve made by the recharge of the groundwater table aquifer resulting from rainfall in determined by the Singh and Stall's graphical method, and the continuous from for the curve is approximated by the multiple and polynomial regression. this procedure was successfully tested for the separation of base flow and the establishment of hydrograph in a natural watershed. It was found that the direct numerical method applied to the homogeneous linear second order ordinary differential equation system is not suited to obtain the recession curve, and the case that the loss is generated in the partially penetrating stream can not be solved by the method of this study.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.675-681
• /
• 2005

Noise is used to create realistic animations that look like natural phenomena as well as procedural textures and shapes by adding randomness to graphical applications. In this paper, we suggest a method to edit noise values to satisfy the constraints that reflect the user's demands while maintaining the inherent statistical features of the noise function. Noise editing uses optimization to minimize the difference between the statistical characteristics of the ideal and edited versions of a noise source. Using our editing method, detailed control of animation and shape data that include noise is possible.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.318-322
• /
• 1996

This paper presents a technique to control a robot which has a flexible manipulator moving in a vertical plane. The flexible manipulator is modeled as an Euler-Bernoulli beam. Elastic deformation is represented using the assumed modes method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. A control algorithm is developed using a simple PID control technique. The proportional, integral and derivative control gains are determined based on the dominant pole placement method and tuned to show no overshoot and having a short settling time. The effectiveness of the developed control scheme is showed experimentally. In the position control experiment, three different end masses are used. The experimental results shows little overshoot, no steady state error, and less than 2.5 second settling time in case of having an end mass which is equivalent to 45% of the total system weight. Also the residual vibration of the end point is effectively controlled.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.141-147
• /
• 1999

Optical disk technology with a laser beam for data recording and retrieval is one of the most promising route for high density information storage in multimedia era. As the storage density and data transfer rates are increased, mechanical issues, mainly noise and vibration, become critical. Rubber materials are extensively used in various machine design application, mainly for vibration/shock/noise control devices. Over the years an enormous effort has been put into developing procedures to provide properties of rubber components with complex shape and under pre-deformed state. In this paper, non-linear large deformations of a rubber mount for optical disk drive were investigated using the finite element method. A tension test of rubber material was performed, to calculate a strain energy function. According to the pre-deformed state, the variation of rubber mount stiffness were calculated and the reliability of numerical results were checked by compared with the measuring the deflection values. Also, the effects of the pre-deformed rubber mount on the system dynamic characteristics were investigated and the relation between the static stiffness variation of rubber mount and the natural frequence variation of system was discussed.

• Journal of the Korean Magnetics Society
• /
• v.11 no.1
• /
• pp.14-20
• /
• 2001

The structure, shape, size, and magnetic properties of Ni$_{0.5}$Cu$_{0.1}$Zn$_{0.4}$Fe$_2$O$_4$ have been investigated as a function of annealing temperatures. In order to control the microwave absorbing properties of ferrite-rubber composite and the complex losses (magnetic loss and conduction loss), the effect of carbon addition was also studied. It was found that the coercive force decreased with increasing heat-treatment temperatures. Relative complex permeability and reflection loss were measured by the network analyzer. As a result, the natural resonance occurred in the low frequency tinge, and the matching frequency of the ferrite-rubber composite prepared at 130$0^{\circ}C$ was found to be lower. As heat-treatment temperatures were increased, the magnetic loss ($\mu$$_{r}$", $\mu$$_{r}$′) and the dielectric loss ($\varepsilon$$_{r}$"/$\varepsilon$$_{r}$′) were increased. It was caused that the absorption characteristics of the absorber were improved. The conduction loss and magnetic loss were expected to be occurred together because two matching frequencies were shown with carbon addition. It was confirmed that the matching frequency of the microwave absorber could be controlled by controlling heat-treatment temperatures and carbon additions.ons.tions.