• Corrosion Science and Technology
• /
• 제19권5호
• /
• pp.259-264
• /
• 2020

Many studies have been conducted to improve the corrosion resistance and durability of various aluminum alloys through the anodizing technique. It is already used as a unique technique for enhancing the properties of aluminum alloys in various industries. This paper investigated the electrochemical corrosion and stress corrosion cracking characteristics of anodized aluminum 5083-H321 alloy in natural seawater. The corrosion characteristics were assessed by the electrochemical technique and potentiodynamic polarization test. The stress corrosion cracking characteristic was evaluated with a slow strain rate tensile test under 0.005 mm/min rate, which showed that the hard anodizing film had a thickness of about 16.8 ㎛. Although no significant characteristics of stress corrosion cracking were observed in the slow strain rate test, the anodized specimen presented excellent corrosion resistance. The corrosion current density was measured to be approximately 4.2 times lower than that of the base material, and no surface damage was observed in the anodic polarization test.

• Corrosion Science and Technology
• /
• 제6권6호
• /
• pp.269-274
• /
• 2007

The corrosion of steel in concrete is significant in marine environment. Salt damage is one of the most detrimental causes to concrete bridges and port structures. Especially, the splash and tidal zones around water line are comparatively important in terms of safety and life-time point of view. During the last several decades, cathodic protection (cp) has been commonly accepted as an effective technique for corrosion control in concrete structures. Zn-mesh sacrificial anode has been recently developed and started to apply to the bridge column cp in marine condition. The detailed parameters regarding Zn-mesh cp technique, however, have not well understood so far. This study is to investigate how much Zn-mesh cp influences along the concrete column at elevated temperature. About 100 cm column specimens with eight of 10 cm segment rebars have been used to measure the variation of cp potential with the distance from Zn-mesh anode at both $10^{\circ}C$ and $40^{\circ}C$ in natural seawater. The cp potential change and current diminishment along the column specimens have been discussed for the optimum design of cp by Zn-mesh sacrificial anode.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.450-452
• /
• 2004

Using factor analysis and bivariate comparisons of major components in ground water, three geochemical processes were identified as controlling factors of ground water chemistry; 1) natural mineralization by water rock interactions, 2) effect of seawater which includes salinization by seawater near seashores and deposition of sea salt, and 3) nitrate contamination by N fertilization. Contribution of rainfall was also estimated from the measured composition of wet deposition. The geochemical processes were separated using total alkalinity as an indicator for natural mineralization, Cl for effect of seawater, and nitrate for N fertilization. Relatively high correlation of major components with nitrate suggests that nitrification of nitrogenous fertilizers significantly affects ground water chemistry. Total cations derived from nitrate sources have good linearity for nitrate in equivalent basis with a slope of 1.8, which is a mean of proton production coefficients in nitrification of two major compounds in nitrogenous fertilizers, ammonium and urea. Contribution of nitrate sources to base cations, Cl, and SO$_4$ in ground water was determined considering maximum contribution of natural mineralization to estimate a threshold of the effect of N fertilization for ground water chemistry, which shows W fertilization has a greatest effect than any other processes in ground water with nitrate concentration greater than 50 mg/L for Ca, Mg, Na and with concentration greater than 30 mg/L for Cl and SO$_4$.

• Corrosion Science and Technology
• /
• 제22권2호
• /
• pp.108-114
• /
• 2023

In this study, anti-corrosion effect was investigated through various electrochemical experiments after applying Al thermal spraying technology to AA5083-H321. Open circuit potential and anodic polarization curves were analyzed through electrochemical experiments in natural seawater. The shape of the surface was observed using a scanning electron microscope (SEM) and a 3D microscope before and after the experiment. Component and crystal structure were analyzed through EDS and XRD. As a result, the surface roughness of AA5083-H321 and the Al thermal sprayed coating layer increased due to surface damage caused by anodic dissolution reaction during the anodic polarization experiment. The corrosion rate of AA5083-H321 was relatively low because the Al thermal spray coating layer contained structural defects such as pores and crevices. Nevertheless, the open circuit potential of the Al thermal spray coating layer in natural seawater was measured about 0.2 V lower than that of AA5083-H321. Thus, a sacrificial anode protection effect can be expected.

• 한국수산과학회지
• /
• 제45권1호
• /
• pp.11-16
• /
• 2012

In coastal areas that are affected by continuous, seasonal or occasional pollution sources, bivalves accumulate biological contaminants such as pathogenic bacteria. We investigated the effect of natural seawater relaying and electrolyzed seawater depuration on the bacteriological quality of artificially contaminated oysters Crassostrea gigas and short-necked clams Ruditapes philippinarum to suggest an alternative method of shellfish sanitation control.When artificially contaminated oysters and short-necked clams (fecal coliform level 1,700 MPN/100 g) were relayed into a sea area of safe bacteriological water quality, the fecal coliform level dropped to below 110 MPN/100 g after 1 day. The bacteriological quality of oysters and short-necked clams that are contaminated at a fecal coliform level of 1,700 MPN/100 g could be improved, and become appropriate for raw consumption by a single day relay under proper environmental conditions. When artificially contaminated oysters (fecal coliform level 330 MPN/100 g) were depurated with electrolyzed seawater, 94% of fecal coliform was eliminated after 12 h and fecal coliform was undetectable after 24 h. After 24 h depuration with electrolyzed seawater, the fecal coliform level of short-necked clams with initial fecal coliform of 2,400 MPN/100 g was below 20 MPN/100 g. However, the fecal coliform level of short-necked clams with initial fecal coliform of 17,000 MPN/100 g was relatively high, at 790 MPN/100 g, even after 24 h of depuration with electrolyzed seawater, because of the repeated cycle of excretion and accumulation of fecal coliform in shellfish tissue under the closed depuration environment. Such natural seawater relaying and electrolyzed seawater depuration can be restrictively applied to improve or secure the bacteriological quality of oysters and short-necked clams in accordance with safety levels for bivalves for raw consumption.

• 상하수도학회지
• /
• 제22권3호
• /
• pp.343-350
• /
• 2008

Many reports have warned of insufficient water supply in most countries in future and prospected providing safe and clean water become more difficult by lack of access to sustainable drinking water resources. Several facts and figures explained the impact by natural climate change and human activity results in the water scarcity and deterioration. Among many scientific solutions, the seawater desalination using a reverse osmosis membrane, so called SWRO (Seawater Reverse Osmosis) process, has been recognized as one of the most promising alternatives because of its stability and efficiency in producing large amount of drinking water from seawater through desalination by membrane filtration. Recently, in Korea, numerous researches are conducted to develop more productive and cost effective SWRO process for its wide implementation. The objective of this paper is to review the patents concerning SWRO technologies involving the plant engineering, maintenance including pretreatment of seawater and fouling control, module design, and mechanical units development for energy saving. The patents in Korea, U.S., Japan, Europe, and PCT were intensively researched and analyzed to provide the state of the art as well as leading edge technology on SWRO. This information can hopefully suggest meaningful guidelines on future research and development.

• Corrosion Science and Technology
• /
• 제2권5호
• /
• pp.219-224
• /
• 2003

Crevice corrosion of stainless steels in natural seawater was investigated for several post weld treatments; as-annealed, as-welded, pickled, and ground. The results confirmed the effect of the biofilm on the cathodic reaction leading to an ennoblement of the rest potential. The degree of ennoblement of corrosion potential depends on the surface finish. As-annealed and pickled samples show stable corrosion potential approaching to 200 ~ 300 mV (SCE) while as-welded and ground samples show the fluctuating corrosion potential. This points to a situation where there are conflicting effects determining the trend in free corrosion potential. Crevice corrosion initiation will tend to pull the free corrosion potential in the active direction, whereas the presence of biofilm will tend to ennoble corrosion potential. There was no visible attack on UNS S31803, S32550, and 2205W. Therefore, those stainless steel grades appeared to be resistant to crevice corrosion in natural seawater on condition of weld metal.

• Animal cells and systems
• /
• 제12권4호
• /
• pp.231-240
• /
• 2008

The gorgonian coral Anthoplexaura dimorpha Kukenthal, 1908(Gorgonacea: Octocorallia) is abundant in Jejudo Islands, Korea. To investigate the sexual reproduction of this species, we surveyed the morphology and cycle of gametogenesis. 5-6cm long fragments from 3-7 randomly chosen colonies were collected monthly at a depth of 12-24m in the water surrounding Munseom from August 2003 to August 2005. This species was gonochoric with sex ratio of 1.86:1(female to male), and had one annual reproductive cycle affected by elevation of seawater temperature. Oogenesis was longer than spermatogenesis as 12 months in female and 6 months in male. The planulae were not observed from the field survey and histological sections, which suggested broadcast spawning for the reproductive mode in this species. The possible spawning events may occur after the seawater temperature attain to the annual peak in September.

• 한국환경보건학회지
• /
• 제33권4호
• /
• pp.325-337
• /
• 2007

The effect of seawater and air pollutants on the three-story stone pagodas on Gameunsa Temple Site have been studied in order to establish conservation basic plan. Also, an experimental study has been conducted to evaluate the effect of seawater salt and air pollutants on the weathering of granite. The results could be summarized as follows. Because the three-story stone pagodas on Gameunsa Temple Site are located outdoors, the external appearance has been largely deteriorated due to natural and artificial factors such as typhoon, wind, microorganisms, moisture, extreme change in temperature, air pollutants, and seawater, etc. When G.J fresh granite was dipped into the seawater, dissolution rate of three minerals (Mg, Ca, and K) are increased linearly until about 40 days and then increased abruptly. After seawater dipping experiments, the mineral compositions of the granite surface were lower then that of the G.J fresh granite but Poisson's ratio and absorption ratio were slightly increased. Therefore, from these results we can say that stone cultural properties could be weathered by seawater and air pollutants and it's considered being a meaningful experiment to study the conservation method of stone cultural properties from seawater.

• 멤브레인
• /
• 제12권3호
• /
• pp.182-191
• /
• 2002

복합 박막의 구조를 갖는 폴리아미드계 역삼투 분리막은 상용화되어 해수담수화 공정에 널리 적용되어져 왔다. 최근 고압·고회수율 공정은 기존의 해수 담수화 공정에 비해 에너지 비용 및 전처리의 규모의 측면에서 절감 효과를 가진다는 결과들이 발표되어왔다. 고압·고회수율 공정은 에너지 회수, 고압 펌프 설비, 그리고 고압 고염제거율의 역삼투막 개발에 의해 가능해 졌다. 본 연구에서는 기존의 해수담수화 공정에 사용되는 역삼투 분리막에 대한 고압·고회수율 공정 조건에서의 투과 성능을 조사하였다. 역삼투 분리막 평막의 평가에는 3.5%의 NaCl 수용액을 인공해수로 조제하여 실시하였으며 역삼투 분리막 모듈의 평가는 마산시 합포해변에서 자연 해수를 직접 사용하였다. 그 결과로 고압 고회수율 공정에 적합한 역삼투막은 고압에 대한 내압성을 갖는 역삼투막임을 보여준다. 고농축수에 대한 염제거율은 고압 운전에 의해 자연 향상되는 경향을 나타내었다.