• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.613-617
• /
• 2006

개별 하천에 존재하는 하상재료는 상류의 지질특성과 유수에 의한 작용력의 특성을 반영하고 있으며 유수에 의한 작용력은 하상경사와 유량규모에 지배적인 영향을 받는다. 산본 황일(山本 晃一)(1994)에 의하면 자연하천에서 동일한 경사를 가지는 하도 구간은 하상재료, 소류력, 저수로 폭, 수심 등이 대체로 동일한 값을 나타내고 있으며, 하도 특성을 지배하는 주요인자로 각 하천의 평균연최대유량, 하상재료의 대표입경, 하상경사 등을 설정하고 있다. 하상재료는 하도의 물리적, 생태적 특성을 지배하는 대표적인 인자로 의미가 있으나 국내에서는 이와 관련된 연구가 미비한 실정이다. 본 연구에서는 국내 하천의 하도 특성을 분석하는 기초연구로서 대표하천에 대한 하상재료를 채취하여 분석하였으며 이를 분급도와 하상경사와의 관계로 도시하여 하상재료 분포 특성을 분석하였으며 이를 일본 하천의 하상재료 특성과 비교하였다. 분석결과에 의하면 분급도, 무차원 소류력, 하상경사와의 관계 분석을 통해서 자갈과 모래하천은 그 특성이 뚜렷이 구분됨을 확인할 수 있었으며, 하상경사와 대표입경의 관계도 모래와 자갈을 구분하여 접근하여야 함을 확인하였다.

• 한국염색가공학회지
• /
• 제19권6호
• /
• pp.12-20
• /
• 2007

Four kinds of natural dying solutions (natural colorant extracts)were obtained by extraction from sappan wood, black tea, peony, and clove using water as extracting solvent at $90^{\circ}C$ for 90 min with liquor ratio (solid natural colorant material/solvent water, weight ratio) of 1/10. The dyeing, colour fastness and deodorizing properties of fabrics (cotton, silk, and wool fabrics) dyed with natural colorant extracts were compared. It was found that these properties were significantly dependent on the concentration of extracts, the structure of colorant, and the kind of fabrics. The K/S value of dyed cotton fabric increased in the order of peony < sappan wood < clove < black tea, however, the values of dyed silk and wool fabrics were in the order of peony < sappan wood < black tea < clove. Colour fastness (light, water, and perspiration fastness) was in the range of 3 - 5 grade except for sappan wood. The deodorizing performance of fabrics dyed with various natural colorants extracts was in the range of 56 - 99%. The deodorizing performance increased in the order of peony < black tea < sappan wood < clove. Especially, the deodorizing performance of all fabrics dyed with clove was found to be the highest at 98-99%.

• 한국염색가공학회지
• /
• 제19권1호
• /
• pp.17-23
• /
• 2007

Dyeing properties using natural material named Sasa quelpaertensis Nakai were investigated under various conditions such as fabric type, pH, concentration, temperature, dyeing time and dipping count. Sasa quelpaertensis Nakai is a unique material in that it is raised only at Halla mountain in Jeju island and is known to have healing effect. Overall, wool fabrics were better than cotton fabrics in all aspects of the dyeing properties showing reddish yellow. For the fastness properties, robbins washing and perspiration fastness were excellent but lightfastness was poor as expected.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권6호
• /
• pp.716-723
• /
• 2006

A meso-scale analysis method using the natural element method is proposed for the analysis of material damage of brittle microcracking solids. The microcracking is assumed to occur along Voronoi edges in the Voronoi diagram generated using the nodal points as the generators. The mechanical effect of microcracks is considered by controlling the material constants in the neighborhood of the micorcracks. The macro elastic moduli of isotropic solids containing a number of randomly distributed microcracks are calculated considering the effect of microcrack closure to demonstrate the validity of the proposed method.

• 한국조경학회지
• /
• 제28권4호
• /
• pp.44-53
• /
• 2000

The purpose of this paper is to evaluate environmental friendliness for facilities of national park to improve naturalness of national park. We have evaluated environmental friendliness of the facilities in Chirisan national park in terms of resource conservation and environmental integration, which are consisted of 9 and 8 evaluation indicators, respectively. Environmental friendliness of the small facilities was not good due to not using locally obtained materials and natural material, and that of large and complex facilities was bad in the field of excessive damage during construction, inadequate maintenance, use of natural material, locally obtained material, environmental integration with surroundings. In evaluating environmental attributes, new facilities is better than the older ones. The small facilities appeared to be worse than those of the complex, and the large facilities are the worst in terms of environmental friendliness. In general, environmental friendliness turned out to be lower in the light of the facilities in the clustered area than those of the facilities of the other area. In the future, It is required that criteria for evaluating environmental friendliness of natural park facilities is established.

• BMB Reports
• /
• 제43권2호
• /
• pp.133-139
• /
• 2010

We have performed analyses using ancient DNA extracted from 25 excavated human bones, estimating around the 1st century B.C. Ancient human bones were obtained from Nukdo Island, which is located off of the Korean peninsula of East Asia. We made concerted efforts to extract ancient DNA of high quality and to obtain reproducible PCR products, as this was a primary consideration for this extensive kind of undertaking. We performed PCR amplifications for several regions of the mitochondrial DNA, and could determine mitochondrial haplogroups for 21 ancient DNA samples. Genetic information from mitochondrial DNA belonged to super-haplogroup M, haplogroup D or its sub-haplogroups (D4 or D4b), which are distinctively found in East Asians, including Koreans or Japanese. The dendrogram and principal component analysis based on haplogroup frequencies revealed that the Nukdo population was close to those of the East Asians and clearly distinguished from populations shown in the other regions. Considering that Nukdo is geologically isolated in the southern part of the Korean peninsula and is a site of commercial importance with neighboring countries, these results may reflect genetic continuity for the habitation and migration of ethnic groups who had lived in a particular area in the past. Therefore, we suggest that phylogenetic analyses of ancient DNA have significant advantages for clarifying the origins and migrations of ethnic groups, or human races.

• Tribology and Lubricants
• /
• 제23권6호
• /
• pp.318-322
• /
• 2007

The wear characteristics in supre-A dental material have been investigated. The wear tests were performed by using pin-on-disk wear tester at room temperature. Vickers hardness and fracture toughness measurement of dental materials were preformed. Microscopic observations on worn surfaces of specimens were conducted by SEM. The friction coefficient of supper-A material was investigated according to weight and slinging velocity. The hardness of supper-A material was a half of the enamel of natural teeth.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.501-507
• /
• 1997

Composite material has very excellent mechanical properties including tensile stress and specific strength. Especially impact loads may be expected in many of the engineering applications of it. The suitability of composite material for such applications is determined not only by the usual paramenters, but its impactor energy-absorbing properties. Composite material under impact load has poor mechanical behavior and so needs tailoring its structure. Genetic algorithms(GA) is probabilistic optimization technique by principle of natural genetics and natural selection and neural networks(NN) is useful for prediction operation on the basis of learned data. Therefore, This study presents optimization techniques on the basis of genetic algorithms and neural networks to minimum stiffness design of laminated composite material.

• 광물과 암석
• /
• 제33권1호
• /
• pp.65-71
• /
• 2020

유리 표준물질은 정밀 지구화학 분석법에 필수적으로 이용되는 표준물질이다. 기존의 합성 유리 표준물질의 단점인 자연 암석과의 조성 차이로 인한 높은 불확실성을 보완하기 위해, 자연산 암석을 이용하여 유리 표준물질을 제작하였다. 백두산 흑요암인 NK-B1G 시료는 미세결정이나 포유물 등의 결정을 포함하지 않는 자연 유리질 암석으로, EPMA나 LA-ICPMS 분석 등의 미세분석을 위한 표준물질로서의 적합성을 확인하였다.

• 공업화학
• /
• 제5권6호
• /
• pp.981-989
• /
• 1994

국내에서 상당량 채취되는 자연산 bentonite(Ca계)와 이를 $Na_2CO_3$로 전환시켜 상업적으로 여러 용도에서 사용되는 Na계 bentonite를 신소재 개발을 위한 점토/유기물 복합체에 대한 고찰 측면에서 matrix 수지를 ABS로 하고 이의 충진재로의 특성을 살펴 보았다. 결과, bentonite의 함량이 증가하면 탄성율은 증가하지만 충격강도는 감소하였으며, 경도는 일정하였다. Na계 bentonite가 Ca계에 비하여 탄성율은 낮지만 충격강도에서 상대적 높은 값을 나타내었다. 저장탄성율(E')은 온도가 상승함에 따라 감소하나 tan ${\delta}$는 주파수가 증가할수록 고온으로 shift되었다.